search

derekperrin / rt-n56u

Automatically exported from code.google.com/p/rt-n56u
0 stars 0 forks source link

miniupnpd error in log file #133

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
In log file I get every minute next line:
[837]: /ctl/IPConn not found, responding ERROR 404

Firmware Version: 1.0.1.8d-p1 

br, Jernej

Original issue reported on code.google.com by jernej.n...@gmail.com on 27 Feb 2012 at 7:37

GoogleCodeExporter commented 9 years ago 
I've direct upgraded from Firmware RT-N56U_1.0.1.7f-p11. I have attached USB 
disk with transmission running smoothly.

Original comment by jernej.n...@gmail.com on 27 Feb 2012 at 7:39

GoogleCodeExporter commented 9 years ago 
Why have you decided it is the error of miniupnpd. Attach the full log please.

Original comment by d...@soulblader.com on 27 Feb 2012 at 7:47

GoogleCodeExporter commented 9 years ago 
Jan  1 00:00:08 syslogd started: BusyBox v1.19.3
Jan  1 00:00:09 RT-N56U: bootloader version: RT-N56U-01-00-00-06
Jan  1 00:00:09 RT-N56U: firmware version: 1.0.1.8d-p1
Jan  1 00:00:09 kernel: klogd started: BusyBox v1.19.3 (2012-02-23 15:52:46 
KRAT)
Jan  1 00:00:09 kernel: Linux version 2.6.21 (asus@localhost) (gcc version 
3.4.2) #3634 Thu Feb 23 16:13:37 KRAT 2012
Jan  1 00:00:09 kernel:  The CPU feqenuce set to 500 MHz
Jan  1 00:00:09 kernel: CPU revision is: 0001974c
Jan  1 00:00:09 kernel: Determined physical RAM map:
Jan  1 00:00:09 kernel:  memory: 08000000 @ 00000000 (usable)
Jan  1 00:00:09 kernel: On node 0 totalpages: 32768
Jan  1 00:00:09 kernel:   DMA zone: 256 pages used for memmap
Jan  1 00:00:09 kernel:   DMA zone: 0 pages reserved
Jan  1 00:00:09 kernel:   DMA zone: 32512 pages, LIFO batch:7
Jan  1 00:00:09 kernel:   Normal zone: 0 pages used for memmap
Jan  1 00:00:09 kernel: Built 1 zonelists.  Total pages: 32512
Jan  1 00:00:09 kernel: Kernel command line: console=ttyS1,57600n8 
root=/dev/mtdblock4
Jan  1 00:00:09 kernel: Primary instruction cache 64kB, physically tagged, 
4-way, linesize 32 bytes.
Jan  1 00:00:09 kernel: Primary data cache 32kB, 4-way, linesize 32 bytes.
Jan  1 00:00:09 kernel: Synthesized TLB refill handler (20 instructions).
Jan  1 00:00:09 kernel: Synthesized TLB load handler fastpath (32 instructions).
Jan  1 00:00:09 kernel: Synthesized TLB store handler fastpath (32 
instructions).
Jan  1 00:00:09 kernel: Synthesized TLB modify handler fastpath (31 
instructions).
Jan  1 00:00:09 kernel: cause = c0808000, status = 11000000
Jan  1 00:00:09 kernel: PID hash table entries: 512 (order: 9, 2048 bytes)
Jan  1 00:00:09 kernel: calculating r4koff... 001e8480(2000000)
Jan  1 00:00:09 kernel: CPU frequency 500.00 MHz
Jan  1 00:00:09 kernel: Using 250.000 MHz high precision timer.
Jan  1 00:00:09 kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 
bytes)
Jan  1 00:00:09 kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 
bytes)
Jan  1 00:00:09 kernel: Memory: 126592k/131072k available (2308k kernel code, 
4408k reserved, 740k data, 120k init, 0k highmem)
Jan  1 00:00:09 kernel: Calibrating delay loop... 249.34 BogoMIPS (lpj=498688)
Jan  1 00:00:09 kernel: Mount-cache hash table entries: 512
Jan  1 00:00:09 kernel: NET: Registered protocol family 16
Jan  1 00:00:09 kernel: RALINK_PCI_PCICFG_ADDR = 0
Jan  1 00:00:09 kernel: *************** Ralink PCIe RC mode *************
Jan  1 00:00:09 kernel: registering PCI controller with io_map_base unset
Jan  1 00:00:09 kernel: SCSI subsystem initialized
Jan  1 00:00:09 kernel: usbcore: registered new interface driver usbfs
Jan  1 00:00:09 kernel: usbcore: registered new interface driver hub
Jan  1 00:00:09 kernel: usbcore: registered new device driver usb
Jan  1 00:00:09 kernel: 2->[1][0][0][30]=0
Jan  1 00:00:09 kernel: 5->[1][0][0][30]=fffffffe
Jan  1 00:00:09 kernel: 2->[1][0][0][30]=0
Jan  1 00:00:09 kernel: 5->[1][0][0][30]=0
Jan  1 00:00:09 kernel: PCI: Bridge: 0000:00:00.0
Jan  1 00:00:09 kernel:   IO window: disabled.
Jan  1 00:00:09 kernel:   MEM window: 20000000-200fffff
Jan  1 00:00:09 kernel:   PREFETCH window: disabled.
Jan  1 00:00:09 kernel: PCI: Setting latency timer of device 0000:00:00.0 to 64
Jan  1 00:00:09 kernel: BAR0 at slot 0 = 0
Jan  1 00:00:09 kernel: bus=0, slot = 0x0
Jan  1 00:00:09 kernel: P2P(PCI) 0x00 = 08021814
Jan  1 00:00:09 kernel: P2P(PCI) 0x04 = 00100007
Jan  1 00:00:09 kernel: P2P(PCI) 0x08 = 06040001
Jan  1 00:00:09 kernel: P2P(PCI) 0x0c = 00010014
Jan  1 00:00:09 kernel: P2P(PCI) 0x10 = 00000000
Jan  1 00:00:09 kernel: P2P(PCI) 0x14 = 20100000
Jan  1 00:00:09 kernel: P2P(PCI) 0x18 = 00010100
Jan  1 00:00:09 kernel: P2P(PCI) 0x1c = 000000f0
Jan  1 00:00:09 kernel: P2P(PCI) 0x20 = 20002000
Jan  1 00:00:09 kernel: P2P(PCI) 0x24 = 0000fff0
Jan  1 00:00:09 kernel: P2P(PCI) 0x28 = 00000000
Jan  1 00:00:09 kernel: P2P(PCI) 0x2c = 00000000
Jan  1 00:00:09 kernel: P2P(PCI) 0x30 = 00000000
Jan  1 00:00:09 kernel: P2P(PCI) 0x34 = 00000040
Jan  1 00:00:09 kernel: P2P(PCI) 0x38 = 00000000
Jan  1 00:00:09 kernel: P2P(PCI) 0x3c = 00040100
Jan  1 00:00:09 kernel: res[0]->start = 0
Jan  1 00:00:09 kernel: res[0]->end = 1ffffff
Jan  1 00:00:09 kernel: res[1]->start = 20100000
Jan  1 00:00:09 kernel: res[1]->end = 2010ffff
Jan  1 00:00:09 kernel: res[2]->start = 0
Jan  1 00:00:09 kernel: res[2]->end = 0
Jan  1 00:00:09 kernel: res[3]->start = 0
Jan  1 00:00:09 kernel: res[3]->end = 0
Jan  1 00:00:09 kernel: res[4]->start = 0
Jan  1 00:00:09 kernel: res[4]->end = 0
Jan  1 00:00:09 kernel: res[5]->start = 0
Jan  1 00:00:09 kernel: res[5]->end = 0
Jan  1 00:00:09 kernel: bus=1, slot = 0x0
Jan  1 00:00:09 kernel: dev III(PCIe)  0x00 = 30911814
Jan  1 00:00:09 kernel: dev III(PCIe)  0x04 = 00100000
Jan  1 00:00:09 kernel: dev III(PCIe)  0x08 = 02800000
Jan  1 00:00:09 kernel: dev III(PCIe)  0x0c = 00000000
Jan  1 00:00:09 kernel: dev III(PCIe)  0x10 = 20000000
Jan  1 00:00:09 kernel: dev III(PCIe)  0x14 = 00000000
Jan  1 00:00:09 kernel: dev III(PCIe)  0x18 = 00000000
Jan  1 00:00:09 kernel: dev III(PCIe)  0x1c = 00000000
Jan  1 00:00:09 kernel: dev III(PCIe)  0x20 = 00000000
Jan  1 00:00:09 kernel: dev III(PCIe)  0x24 = 00000000
Jan  1 00:00:09 kernel: dev III(PCIe)  0x28 = 00000000
Jan  1 00:00:09 kernel: dev III(PCIe)  0x2c = 30911814
Jan  1 00:00:09 kernel: dev III(PCIe)  0x30 = 00000000
Jan  1 00:00:09 kernel: dev III(PCIe)  0x34 = 00000040
Jan  1 00:00:09 kernel: dev III(PCIe)  0x38 = 00000000
Jan  1 00:00:09 kernel: dev III(PCIe)  0x3c = 000001ff
Jan  1 00:00:09 kernel: res[0]->start = 20000000
Jan  1 00:00:09 kernel: res[0]->end = 2000ffff
Jan  1 00:00:09 kernel: res[1]->start = 0
Jan  1 00:00:09 kernel: res[1]->end = 0
Jan  1 00:00:09 kernel: res[2]->start = 0
Jan  1 00:00:09 kernel: res[2]->end = 0
Jan  1 00:00:09 kernel: res[3]->start = 0
Jan  1 00:00:09 kernel: res[3]->end = 0
Jan  1 00:00:09 kernel: res[4]->start = 0
Jan  1 00:00:09 kernel: res[4]->end = 0
Jan  1 00:00:09 kernel: res[5]->start = 0
Jan  1 00:00:09 kernel: res[5]->end = 0
Jan  1 00:00:09 kernel: Time: MIPS clocksource has been installed.
Jan  1 00:00:09 kernel: NET: Registered protocol family 2
Jan  1 00:00:09 kernel: IP route cache hash table entries: 1024 (order: 0, 4096 
bytes)
Jan  1 00:00:09 kernel: TCP established hash table entries: 4096 (order: 3, 
32768 bytes)
Jan  1 00:00:09 kernel: TCP bind hash table entries: 4096 (order: 2, 16384 
bytes)
Jan  1 00:00:09 kernel: TCP: Hash tables configured (established 4096 bind 4096)
Jan  1 00:00:09 kernel: TCP reno registered
Jan  1 00:00:09 kernel: ralink flash device: 0x1000000 at 0x1c000000
Jan  1 00:00:09 kernel: Ralink SoC physically mapped flash: Found 1 x16 devices 
at 0x0 in 16-bit bank
Jan  1 00:00:09 kernel: Ralink SoC physically mapped flash: Found an alias at 
0x800000 for the chip at 0x0
Jan  1 00:00:09 kernel:  Amd/Fujitsu Extended Query Table at 0x0040
Jan  1 00:00:09 kernel: number of CFI chips: 1
Jan  1 00:00:09 kernel: cfi_cmdset_0002: Disabling erase-suspend-program due to 
code brokenness.
Jan  1 00:00:09 kernel: Creating 6 MTD partitions on "Ralink SoC physically 
mapped flash":
Jan  1 00:00:09 kernel: 0x00000000-0x00030000 : "Bootloader"
Jan  1 00:00:09 kernel: 0x00030000-0x00040000 : "Config"
Jan  1 00:00:09 kernel: 0x00040000-0x00050000 : "Factory"
Jan  1 00:00:09 kernel: 0x00050000-0x00800000 : "Kernel"
Jan  1 00:00:09 kernel: 0x00160000-0x007f0000 : "RootFS"
Jan  1 00:00:09 kernel: 0x007f0000-0x00800000 : "Storage"
Jan  1 00:00:09 kernel: RT3xxx EHCI/OHCI init.
Jan  1 00:00:09 kernel: squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
Jan  1 00:00:09 kernel: squashfs: LZMA suppport for slax.org by jro
Jan  1 00:00:09 kernel: io scheduler noop registered (default)
Jan  1 00:00:09 kernel: PCI: Setting latency timer of device 0000:00:00.0 to 64
Jan  1 00:00:09 kernel: pcie_portdrv_probe->Dev[1814:0802] has invalid IRQ. 
Check vendor BIOS
Jan  1 00:00:09 kernel: assign_interrupt_mode Found MSI capability
Jan  1 00:00:09 kernel: Allocate Port Service[0000:00:00.0:pcie00]
Jan  1 00:00:09 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan  1 00:00:09 kernel: Ralink gpio driver initialized
Jan  1 00:00:09 kernel: spidrv_major = 217
Jan  1 00:00:09 kernel: software reset RTL8367M...
Jan  1 00:00:09 kernel: RTL8367M driver initialized
Jan  1 00:00:09 kernel: HDLC line discipline: version $Revision: 1.1.1.1 $, 
maxframe=4096
Jan  1 00:00:09 kernel: N_HDLC line discipline registered.
Jan  1 00:00:09 kernel: Serial: 8250/16550 driver $Revision: 1.6 $ 2 ports, IRQ 
sharing disabled
Jan  1 00:00:09 kernel: serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 
16550A
Jan  1 00:00:09 kernel: serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 
16550A
Jan  1 00:00:09 kernel: loop: loaded (max 8 devices)
Jan  1 00:00:09 kernel: MAC_ADRH -- : 0x00000000
Jan  1 00:00:09 kernel: MAC_ADRL -- : 0x00000000
Jan  1 00:00:09 kernel: Ralink APSoC Ethernet Driver Initilization. v2.0.1  512 
rx/tx descriptors allocated, mtu = 1500!
Jan  1 00:00:09 kernel: MAC_ADRH -- : 0x0000000c
Jan  1 00:00:09 kernel: MAC_ADRL -- : 0x432880e1
Jan  1 00:00:09 kernel: NAPI enable, weight = 128, Tx Ring = 512, Rx Ring = 512
Jan  1 00:00:09 kernel: PROC INIT OK!
Jan  1 00:00:09 kernel: PPP generic driver version 2.4.2
Jan  1 00:00:09 kernel: PPP Deflate Compression module registered
Jan  1 00:00:09 kernel: PPP BSD Compression module registered
Jan  1 00:00:09 kernel: PPP MPPE Compression module registered
Jan  1 00:00:09 kernel: NET: Registered protocol family 24
Jan  1 00:00:09 kernel: PPPoL2TP kernel driver, V0.17
Jan  1 00:00:09 kernel: PPTP driver version 0.8.5
Jan  1 00:00:09 kernel: tun: Universal TUN/TAP device driver, 1.6
Jan  1 00:00:09 kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan  1 00:00:09 kernel: nf_conntrack version 0.5.0 (65536 buckets, 16384 max)
Jan  1 00:00:09 kernel: ipt_time loading
Jan  1 00:00:09 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team, 
Type=Restricted Cone
Jan  1 00:00:09 kernel: arp_tables: (C) 2002 David S. Miller
Jan  1 00:00:09 kernel: TCP cubic registered
Jan  1 00:00:09 kernel: NET: Registered protocol family 1
Jan  1 00:00:09 kernel: NET: Registered protocol family 17
Jan  1 00:00:09 kernel: 802.1Q VLAN Support v1.8 Ben Greear 
<greearb@candelatech.com>
Jan  1 00:00:09 kernel: All bugs added by David S. Miller <davem@redhat.com>
Jan  1 00:00:09 kernel: VFS: Mounted root (squashfs filesystem) readonly.
Jan  1 00:00:09 kernel: Freeing unused kernel memory: 120k freed
Jan  1 00:00:09 kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan  1 00:00:09 kernel: rt3xxx-ehci rt3xxx-ehci: Ralink EHCI Host Controller
Jan  1 00:00:09 kernel: rt3xxx-ehci rt3xxx-ehci: new USB bus registered, 
assigned bus number 1
Jan  1 00:00:09 kernel: rt3xxx-ehci rt3xxx-ehci: irq 18, io mem 0x101c0000
Jan  1 00:00:09 kernel: rt3xxx-ehci rt3xxx-ehci: USB 0.0 started, EHCI 1.00, 
driver 10 Dec 2004
Jan  1 00:00:09 kernel: usb usb1: configuration #1 chosen from 1 choice
Jan  1 00:00:09 kernel: hub 1-0:1.0: USB hub found
Jan  1 00:00:09 kernel: hub 1-0:1.0: 2 ports detected
Jan  1 00:00:09 kernel: ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller 
(OHCI) Driver
Jan  1 00:00:09 kernel: rt3xxx-ohci rt3xxx-ohci: RT3xxx OHCI Controller
Jan  1 00:00:09 kernel: rt3xxx-ohci rt3xxx-ohci: new USB bus registered, 
assigned bus number 2
Jan  1 00:00:09 kernel: rt3xxx-ohci rt3xxx-ohci: irq 18, io mem 0x101c1000
Jan  1 00:00:09 kernel: usb usb2: configuration #1 chosen from 1 choice
Jan  1 00:00:09 kernel: hub 2-0:1.0: USB hub found
Jan  1 00:00:09 kernel: hub 2-0:1.0: 2 ports detected
Jan  1 00:00:09 kernel: usb 1-2: new high speed USB device using rt3xxx-ehci 
and address 2
Jan  1 00:00:09 kernel: usb 1-2: configuration #1 chosen from 1 choice
Jan  1 00:00:09 kernel: rt2860v2_ap: module license 'unspecified' taints kernel.
Jan  1 00:00:09 kernel: PCI: Setting latency timer of device 0000:01:00.0 to 64
Jan  1 00:00:09 kernel: GPIOMODE before: 181d
Jan  1 00:00:09 kernel: GPIOMODE writing: 185d
Jan  1 00:00:09 kernel: MAC_ADRH -- : 0x0000bcae
Jan  1 00:00:09 kernel: MAC_ADRL -- : 0xc5eb890e
Jan  1 00:00:10 kernel: phy_tx_ring = 0x077c2000, tx_ring = 0xa77c2000
Jan  1 00:00:10 kernel: phy_rx_ring0 = 0x077c4000, rx_ring0 = 0xa77c4000
Jan  1 00:00:10 kernel: GDMA2_MAC_ADRH -- : 0x0000bcae
Jan  1 00:00:10 kernel: GDMA2_MAC_ADRL -- : 0xc5eb890d
Jan  1 00:00:10 kernel: eth3: ===> VirtualIF_open
Jan  1 00:00:10 kernel: CDMA_CSG_CFG = 81000007
Jan  1 00:00:10 kernel: GDMA1_FWD_CFG = C0710000
Jan  1 00:00:10 kernel: GDMA2_FWD_CFG = C0710000
Jan  1 00:00:11 kernel: =====================================================
Jan  1 00:00:11 kernel: Channel 36 : Dirty = 0, False CCA = 2, Busy Time = 109, 
Skip Channel = FALSE
Jan  1 00:00:11 kernel: Channel 40 : Dirty = 0, False CCA = 0, Busy Time = 0, 
Skip Channel = FALSE
Jan  1 00:00:11 kernel: Channel 44 : Dirty = 0, False CCA = 0, Busy Time = 0, 
Skip Channel = FALSE
Jan  1 00:00:11 kernel: Channel 48 : Dirty = 0, False CCA = 0, Busy Time = 0, 
Skip Channel = FALSE
Jan  1 00:00:11 kernel: =====================================================
Jan  1 00:00:11 kernel: Rule 1 CCA value : Min Dirtiness ==> Select Channel 36 
Jan  1 00:00:11 kernel: Min Dirty = 0
Jan  1 00:00:11 kernel: ExChannel = 40 , 0
Jan  1 00:00:11 kernel: BW        = 40
Jan  1 00:00:11 kernel: 0x1300 = 00064380
Jan  1 00:00:11 kernel: 0x1300 = 00064380
Jan  1 00:00:11 kernel: device eth2 entered promiscuous mode
Jan  1 00:00:11 kernel: rtl8367m - set_green_ethernet(1)
Jan  1 00:00:11 kernel: power up LAN ports
Jan  1 00:00:11 kernel: device ra0 entered promiscuous mode
Jan  1 00:00:11 kernel: device rai0 entered promiscuous mode
Jan  1 00:00:11 kernel: br0: port 3(rai0) entering listening state
Jan  1 00:00:11 kernel: br0: port 2(ra0) entering listening state
Jan  1 00:00:11 kernel: br0: port 1(eth2) entering listening state
Jan  1 00:00:11 dnsmasq[801]: started, version 2.59 cachesize 800
Jan  1 00:00:11 dnsmasq[801]: compile time options: no-IPv6 GNU-getopt no-RTC 
no-DBus no-i18n DHCP no-scripts no-TFTP no-conntrack no-IDN
Jan  1 00:00:11 dnsmasq-dhcp[801]: DHCP, IP range 192.168.1.2 -- 192.168.1.254, 
lease time 1d
Jan  1 00:00:11 dnsmasq[801]: read /etc/hosts - 4 addresses
Jan  1 00:00:11 dnsmasq-dhcp[801]: read /etc/ethers - 1 addresses
Jan  1 00:00:12 kernel: br0: port 3(rai0) entering learning state
Jan  1 00:00:12 kernel: br0: port 2(ra0) entering learning state
Jan  1 00:00:12 kernel: br0: port 1(eth2) entering learning state
Jan  1 00:00:12 kernel: usbcore: registered new interface driver usblp
Jan  1 00:00:12 kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device 
Class driver
Jan  1 00:00:12 kernel: br0: topology change detected, propagating
Jan  1 00:00:12 kernel: br0: port 3(rai0) entering forwarding state
Jan  1 00:00:12 kernel: br0: topology change detected, propagating
Jan  1 00:00:12 kernel: br0: port 2(ra0) entering forwarding state
Jan  1 00:00:12 kernel: br0: topology change detected, propagating
Jan  1 00:00:12 kernel: br0: port 1(eth2) entering forwarding state
Jan  1 00:00:12 kernel: GDMA2_MAC_ADRH -- : 0x0000bcae
Jan  1 00:00:12 kernel: GDMA2_MAC_ADRL -- : 0xc5eb890d
Jan  1 00:00:12 kernel: power up WAN ports
Jan  1 00:00:12 kernel: Ralink HW NAT Module Load
Jan  1 00:00:12 kernel: GDMA2_MAC_ADRH -- : 0x0000bcae
Jan  1 00:00:12 kernel: GDMA2_MAC_ADRL -- : 0xc5eb890d
Jan  1 00:00:12 kernel: eth3: ===> VirtualIF_open
Jan  1 00:00:12 dhcp client: starting wan dhcp (eth3) ...
Jan  1 00:00:12 RT-N56U: wan down (eth3)
Jan  1 00:00:12 miniupnpd[837]: version 1.6 started
Jan  1 00:00:12 miniupnpd[837]: HTTP listening on port 39050
Jan  1 00:00:12 kernel: Initializing USB Mass Storage driver...
Jan  1 00:00:12 kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Jan  1 00:00:12 kernel: usbcore: registered new interface driver usb-storage
Jan  1 00:00:12 kernel: USB Mass Storage support registered.
Jan  1 00:00:12 kernel: usb-storage: device found at 2
Jan  1 00:00:12 kernel: usb-storage: waiting for device to settle before 
scanning
Jan  1 00:00:12 dnsmasq[801]: read /etc/hosts - 4 addresses
Jan  1 00:00:12 dnsmasq-dhcp[801]: read /etc/ethers - 1 addresses
Jan  1 00:00:12 dnsmasq[801]: using nameserver 8.8.8.8#53
Jan  1 00:00:12 dhcp client: deconfig: lease is lost
Jan  1 00:00:14 dropbear[880]: Running in background
Jan  1 00:00:14 kernel: set watchdog pid as: 881
Jan  1 00:00:14 kernel: set watchdog pid as: 881
Jan  1 00:00:14 kernel: usb-storage: device scan complete
Jan  1 00:00:14 kernel: scsi 0:0:0:0: Direct-Access     WD       My Passport 
070A 1032 PQ: 0 ANSI: 4
Jan  1 00:00:14 kernel: scsi 0:0:0:1: Enclosure         WD       SES Device     
  1032 PQ: 0 ANSI: 4
Jan  1 00:00:14 kernel: SCSI device sda: 623769600 512-byte hdwr sectors 
(319370 MB)
Jan  1 00:00:14 kernel: sda: Write Protect is off
Jan  1 00:00:14 kernel: sda: Mode Sense: 23 00 10 00
Jan  1 00:00:14 kernel: sda: assuming drive cache: write through
Jan  1 00:00:14 kernel: SCSI device sda: 623769600 512-byte hdwr sectors 
(319370 MB)
Jan  1 00:00:14 kernel: sda: Write Protect is off
Jan  1 00:00:14 kernel: sda: Mode Sense: 23 00 10 00
Jan  1 00:00:14 kernel: sda: assuming drive cache: write through
Jan  1 00:00:18 RT-N56U: wan up (eth3)
Jan  1 00:00:18 dnsmasq[801]: read /etc/hosts - 4 addresses
Jan  1 00:00:18 dnsmasq-dhcp[801]: read /etc/ethers - 1 addresses
Jan  1 00:00:18 dnsmasq[801]: using nameserver 84.255.209.79#53
Jan  1 00:00:18 dnsmasq[801]: using nameserver 84.255.210.79#53
Jan  1 00:00:18 udpxy[961]: udpxy 1.0-21.1 (prod) standard [Linux 2.6.21 mips] 
is starting
Jan  1 00:00:18 RT-N56U: Hardware NAT: Enabled (offload LAN only)
Jan  1 00:00:18 RT-N56U: DDNS Info: Start update DDNS...
Jan  1 00:00:19 kernel:  sda: sda1
Jan  1 00:00:19 kernel: sd 0:0:0:0: Attached scsi disk sda
Jan  1 00:00:19 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan  1 00:00:19 kernel: scsi 0:0:0:1: Attached scsi generic sg1 type 13
Jan  1 00:00:20 kernel: kjournald starting.  Commit interval 5 seconds
Jan  1 00:00:20 kernel: EXT3 FS on sda1, internal journal
Jan  1 00:00:20 kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jan  1 00:00:20 opt-mount.sh: started [/dev/sda1 /media/AiDisk_a1]
Jan  1 00:00:21 USB storage: plugged in
Jan  1 00:00:22 Samba Server: smb daemon is stoped
Jan  1 00:00:22 ddns update: connected to ns1.asuscomm.com (103.10.4.108) on 
port 80.
Jan  1 00:00:23 Samba Server: daemon is started
Jan  1 00:00:23 transmission-daemon: Starting transmission-daemon...
Jan  1 00:00:23 kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan  1 00:00:23 syslog: ddns_return_code (register,220) ddns_suggest_name () 
ddns_old_name ()
Jan  1 00:00:24 rpc.mountd[1093]: Kernel does not have pseudo root support.
Jan  1 00:00:24 rpc.mountd[1093]: NFS v4 mounts will be disabled unless fsid=0
Jan  1 00:00:24 rpc.mountd[1093]: is specfied in /etc/exports file.
Jan  1 00:00:24 NFS server: daemon is started
Jan  1 00:00:24 dhcp client: bound (eth3), IP: 93.103.184.235, GW: 93.103.0.1, 
lease time: 86400
Feb 27 17:57:49 miniupnpd[837]: /ctl/IPConn not found, responding ERROR 404
Feb 27 17:57:58 ntp client: time is synchronized to pool.ntp.org
Feb 27 17:58:59 miniupnpd[837]: /ctl/IPConn not found, responding ERROR 404
Feb 27 17:59:51 miniupnpd[837]: /ctl/IPConn not found, responding ERROR 404
Feb 27 18:00:50 miniupnpd[837]: /ctl/IPConn not found, responding ERROR 404
Feb 27 18:01:50 miniupnpd[837]: /ctl/IPConn not found, responding ERROR 404
Feb 27 18:02:50 miniupnpd[837]: /ctl/IPConn not found, responding ERROR 404
Feb 27 18:03:50 miniupnpd[837]: /ctl/IPConn not found, responding ERROR 404
Feb 27 18:04:51 miniupnpd[837]: /ctl/IPConn not found, responding ERROR 404
Feb 27 18:05:50 miniupnpd[837]: /ctl/IPConn not found, responding ERROR 404
Feb 27 18:06:50 miniupnpd[837]: /ctl/IPConn not found, responding ERROR 404
Feb 27 18:07:50 miniupnpd[837]: /ctl/IPConn not found, responding ERROR 404
Feb 27 18:08:50 miniupnpd[837]: /ctl/IPConn not found, responding ERROR 404
Feb 27 18:09:50 miniupnpd[837]: /ctl/IPConn not found, responding ERROR 404
Feb 27 18:10:51 miniupnpd[837]: /ctl/IPConn not found, responding ERROR 404
Feb 27 18:11:50 miniupnpd[837]: /ctl/IPConn not found, responding ERROR 404
Feb 27 18:12:51 miniupnpd[837]: /ctl/IPConn not found, responding ERROR 404
Feb 27 18:13:51 miniupnpd[837]: /ctl/IPConn not found, responding ERROR 404
.
.
.

Original comment by jernej.n...@gmail.com on 27 Feb 2012 at 8:00

GoogleCodeExporter commented 9 years ago 
Oh, I see now. It isn't miniupnpd problem actually, but the problem of some 
applications installed from Optware. 
What is the version of Transmission package you use? Have you installed any 
other apps? 
PS: do you use Opera browser?

Original comment by d...@soulblader.com on 27 Feb 2012 at 9:04

GoogleCodeExporter commented 9 years ago 
Some network host tryes call IGD via {router host}/ctl/IPConn.

Original comment by andy.pad...@gmail.com on 27 Feb 2012 at 9:50

GoogleCodeExporter commented 9 years ago 
Is you use Opera Unite?

Original comment by andy.pad...@gmail.com on 28 Feb 2012 at 6:52

GoogleCodeExporter commented 9 years ago 
Yes I'm using Opera and opera unite.

Original comment by jernej.n...@gmail.com on 28 Feb 2012 at 7:11

GoogleCodeExporter commented 9 years ago 
This is Opera bug. But I can hide this hint in miniupnpd.

Original comment by andy.pad...@gmail.com on 28 Feb 2012 at 9:07

GoogleCodeExporter commented 9 years ago 
Ok no problem. I thought it was some problem with miniupnpd. You can close the 
issue. Thank you.

Original comment by jernej.n...@gmail.com on 28 Feb 2012 at 9:11

GoogleCodeExporter commented 9 years ago

Original comment by d...@soulblader.com on 29 Feb 2012 at 9:30