Open Anakin991 opened 5 years ago
send us a dmesg and lspci
here "go ::
root@kali:~# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.0-kali1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.0.4-1+kali2 (2015-06-03)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ef000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000acb6ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000acb70000-0x00000000acb7ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000acb80000-0x00000000afd4efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000afd4f000-0x00000000afdcefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000afdcf000-0x00000000afecefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000afecf000-0x00000000afefefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000afeff000-0x00000000afefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Hewlett-Packard Compaq 615/308C, BIOS 68GVV Ver. F.02 06/17/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 base 00A0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 0100000000 mask FFC0000000 write-back
[ 0.000000] 4 base 00FFE00000 mask FFFFE00000 write-protect
[ 0.000000] 5 base 00FFF40000 mask FFFFFF0000 write-protect
[ 0.000000] 6 base 00ACB70000 mask FFFFFF0000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000140000000 aka 5120M
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01dfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37600000-0x377fffff]
[ 0.000000] [mem 0x37600000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20000000-0x375fffff]
[ 0.000000] [mem 0x20000000-0x375fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fdfff]
[ 0.000000] [mem 0x37800000-0x379fdfff] page 4k
[ 0.000000] BRK [0x01816000, 0x01816fff] PGTABLE
[ 0.000000] BRK [0x01817000, 0x01818fff] PGTABLE
[ 0.000000] BRK [0x01819000, 0x01819fff] PGTABLE
[ 0.000000] BRK [0x0181a000, 0x0181afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7df5a000-0x7fffffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x35958000-0x379fd67d]
[ 0.000000] Move RAMDISK from [mem 0x7df5a000-0x7ffff67d] to [mem 0x35958000-0x379fd67d]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6920 000014 (v00 HP )
[ 0.000000] ACPI: RSDT 0x00000000AFEFE038 000038 (v01 HPQOEM SLIC-MPC 00000003 01000013)
[ 0.000000] ACPI: FACP 0x00000000AFEFD000 000074 (v01 HP 0944 00000003 HP 00000001)
[ 0.000000] ACPI: DSDT 0x00000000AFEE2000 0170A0 (v01 HP 0944 00000001 HP 00000001)
[ 0.000000] ACPI: FACS 0x00000000AFEA1000 000040
[ 0.000000] ACPI: APIC 0x00000000AFEFC000 000084 (v01 HP 0944 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 0x00000000AFEFB000 00003C (v01 HP 0944 00000001 HP 00000001)
[ 0.000000] ACPI: HPET 0x00000000AFEE0000 000038 (v01 HP 0944 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 0x00000000AFEDF000 0002B4 (v01 AMD PowerNow 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4230MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000379fdfff]
[ 0.000000] HighMem [mem 0x00000000379fe000-0x000000013fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000acb6ffff]
[ 0.000000] node 0: [mem 0x00000000acb80000-0x00000000afd4efff]
[ 0.000000] node 0: [mem 0x00000000afeff000-0x00000000afefffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.000000] On node 0 totalpages: 982238
[ 0.000000] free_area_init_node: node 0, pgdat c16cdf00, node_mem_map f2c58024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1967 pages used for memmap
[ 0.000000] Normal zone: 223742 pages, LIFO batch:31
[ 0.000000] HighMem zone: 754498 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000eefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ef000-0x000fffff]
[ 0.000000] e820: [mem 0xaff00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 17 pages/cpu @f2c02000 s40524 r0 d29108 u69632
[ 0.000000] pcpu-alloc: s40524 r0 d29108 u69632 alloc=174096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 980235
[ 0.000000] Kernel command line: BOOT_IMAGE=/live/vmlinuz boot=live noconfig=sudo username=root hostname=kali persistence initrd=/live/initrd.img
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:00140000)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 3839932K/3928952K available (4938K kernel code, 567K rwdata, 1540K rodata, 664K init, 468K bss, 89020K reserved, 0K cma-reserved, 3017992K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xc16e5000 - 0xc178b000 ( 664 kB)
.data : 0xc14d2f08 - 0xc16e3f40 (2116 kB)
.text : 0xc1000000 - 0xc14d2f08 (4939 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:2304 nr_irqs:456 16
[ 0.000000] CPU 0 irqstacks, hard=f242a000 soft=f242c000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1900.073 MHz processor
[ 0.000058] Calibrating delay loop (skipped), value calculated using timer frequency.. 3800.14 BogoMIPS (lpj=7600292)
[ 0.000158] pid_max: default: 32768 minimum: 301
[ 0.000218] ACPI: Core revision 20150204
[ 0.016175] ACPI: All ACPI Tables successfully acquired
[ 0.049762] Security Framework initialized
[ 0.049862] AppArmor: AppArmor disabled by boot time parameter
[ 0.049911] Yama: disabled by default; enable with sysctl kernel.yama.
[ 0.049989] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.050041] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.050435] Initializing cgroup subsys blkio
[ 0.050521] Initializing cgroup subsys memory
[ 0.050575] Initializing cgroup subsys devices
[ 0.050626] Initializing cgroup subsys freezer
[ 0.050678] Initializing cgroup subsys net_cls
[ 0.050729] Initializing cgroup subsys perf_event
[ 0.050781] Initializing cgroup subsys net_prio
[ 0.050858] CPU: Physical Processor ID: 0
[ 0.050906] CPU: Processor Core ID: 0
[ 0.050956] mce: CPU supports 5 MCE banks
[ 0.051015] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.051065] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.051297] Freeing SMP alternatives memory: 24K (c178b000 - c1791000)
[ 0.053047] ftrace: allocating 21477 entries in 42 pages
[ 0.065760] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.066273] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.212754] smpboot: CPU0: AMD Athlon(tm)X2 DualCore QL-60 (fam: 11, model: 03, stepping: 01)
[ 0.212963] Performance Events: AMD PMU driver.
[ 0.213094] ... version: 0
[ 0.213141] ... bit width: 48
[ 0.213187] ... generic registers: 4
[ 0.213233] ... value mask: 0000ffffffffffff
[ 0.213280] ... max period: 00007fffffffffff
[ 0.213327] ... fixed-purpose events: 0
[ 0.213373] ... event mask: 000000000000000f
[ 0.214197] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.214432] CPU 1 irqstacks, hard=f2552000 soft=f2554000
[ 0.214435] x86: Booting SMP configuration:
[ 0.214517] .... node #0, CPUs: #1
[ 0.213419] Initializing CPU#1
[ 0.227703] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.227872] Measured 23075040 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.227930] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.228019] x86: Booted up 1 node, 2 CPUs
[ 0.228068] smpboot: Total of 2 processors activated (7600.29 BogoMIPS)
[ 0.096069] devtmpfs: initialized
[ 0.096452] PM: Registering ACPI NVS region [mem 0xacb70000-0xacb7ffff] (65536 bytes)
[ 0.096452] PM: Registering ACPI NVS region [mem 0xafdcf000-0xafecefff] (1048576 bytes)
[ 0.096452] pinctrl core: initialized pinctrl subsystem
[ 0.096452] NET: Registered protocol family 16
[ 0.108007] cpuidle: using governor ladder
[ 0.120004] cpuidle: using governor menu
[ 0.120080] TOM: 00000000c0000000 aka 3072M
[ 0.120130] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.120139] TOM2: 0000000140000000 aka 5120M
[ 0.120390] ACPI: bus type PCI registered
[ 0.120472] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.120713] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.120771] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.120821] PCI: Using MMCONFIG for extended config space
[ 0.120869] PCI: Using configuration type 1 for base access
[ 0.128091] ACPI: Added _OSI(Module Device)
[ 0.128147] ACPI: Added _OSI(Processor Device)
[ 0.132008] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.132056] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.272060] ACPI: Interpreter enabled
[ 0.272157] ACPI Exception: AE_NOTFOUND, While evaluating Sleep State [_S1] (20150204/hwxface-580)
[ 0.272293] ACPI Exception: AE_NOTFOUND, While evaluating Sleep State [_S2] (20150204/hwxface-580)
[ 0.272447] ACPI: (supports S0 S3 S4 S5)
[ 0.272494] ACPI: Using IOAPIC for interrupt routing
[ 0.276131] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.276474] ACPI: Power Resource [APPR] (off)
[ 0.283114] ACPI: Power Resource [PFN0] (off)
[ 0.283277] ACPI: Power Resource [PFN1] (off)
[ 0.283439] ACPI: Power Resource [PFN2] (off)
[ 0.283601] ACPI: Power Resource [PFN3] (off)
[ 0.283762] ACPI: Power Resource [PFN4] (off)
[ 0.283924] ACPI: Power Resource [PFN5] (off)
[ 0.284854] ACPI: Power Resource [PFN6] (off)
[ 0.285013] ACPI: Power Resource [PFN7] (off)
[ 0.285172] ACPI: Power Resource [PFN8] (off)
[ 0.285331] ACPI: Power Resource [PFN9] (off)
[ 0.285489] ACPI: Power Resource [PFNA] (off)
[ 0.285649] ACPI: Power Resource [PFNB] (off)
[ 0.285785] ACPI: Power Resource [PGF0] (off)
[ 0.287077] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.287176] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.287244] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.287403] acpi PNP0A03:00: host bridge window expanded to [mem 0xf0000000-0xffffffff window]; [mem 0xffe00000-0xffffffff] ignored
[ 0.287506] acpi PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff])
[ 0.287576] acpi PNP0A03:00: ignoring host bridge window [mem 0x000ec000-0x000effff window] (conflicts with reserved [mem 0x000ef000-0x000fffff])
[ 0.287914] PCI host bridge to bus 0000:00
[ 0.287971] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.288005] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.288063] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.288121] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.288181] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.288243] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.288304] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.288366] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.288429] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.288491] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.288553] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.288616] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.288678] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.288741] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.288802] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.288864] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window]
[ 0.288945] pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
[ 0.289154] pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
[ 0.289362] pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
[ 0.289443] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.289505] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.289711] pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
[ 0.289790] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.289851] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.290053] pci 0000:00:09.0: [1022:9608] type 01 class 0x060400
[ 0.290140] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.290200] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.290416] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.290443] pci 0000:00:11.0: reg 0x10: [io 0x6018-0x601f]
[ 0.290457] pci 0000:00:11.0: reg 0x14: [io 0x6024-0x6027]
[ 0.290470] pci 0000:00:11.0: reg 0x18: [io 0x6010-0x6017]
[ 0.290484] pci 0000:00:11.0: reg 0x1c: [io 0x6020-0x6023]
[ 0.290497] pci 0000:00:11.0: reg 0x20: [io 0x6000-0x600f]
[ 0.290511] pci 0000:00:11.0: reg 0x24: [mem 0xd4409000-0xd44093ff]
[ 0.290541] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.290772] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.290791] pci 0000:00:12.0: reg 0x10: [mem 0xd4408000-0xd4408fff]
[ 0.290979] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.291134] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.291153] pci 0000:00:12.1: reg 0x10: [mem 0xd4407000-0xd4407fff]
[ 0.291340] pci 0000:00:12.1: System wakeup disabled by ACPI
[ 0.291501] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.291528] pci 0000:00:12.2: reg 0x10: [mem 0xd4409500-0xd44095ff]
[ 0.291639] pci 0000:00:12.2: supports D1 D2
[ 0.291642] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.291698] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.291897] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.291916] pci 0000:00:13.0: reg 0x10: [mem 0xd4406000-0xd4406fff]
[ 0.292152] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.292305] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.292325] pci 0000:00:13.1: reg 0x10: [mem 0xd4405000-0xd4405fff]
[ 0.292513] pci 0000:00:13.1: System wakeup disabled by ACPI
[ 0.292675] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.292702] pci 0000:00:13.2: reg 0x10: [mem 0xd4409400-0xd44094ff]
[ 0.292814] pci 0000:00:13.2: supports D1 D2
[ 0.292817] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.292874] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.293076] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.293339] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.293369] pci 0000:00:14.2: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit]
[ 0.293458] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.293512] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.293702] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.293928] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.294024] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.294215] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.294234] pci 0000:00:14.5: reg 0x10: [mem 0xd4404000-0xd4404fff]
[ 0.294421] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.294582] pci 0000:00:18.0: [1022:1300] type 00 class 0x060000
[ 0.294713] pci 0000:00:18.1: [1022:1301] type 00 class 0x060000
[ 0.294834] pci 0000:00:18.2: [1022:1302] type 00 class 0x060000
[ 0.294955] pci 0000:00:18.3: [1022:1303] type 00 class 0x060000
[ 0.295086] pci 0000:00:18.4: [1022:1304] type 00 class 0x060000
[ 0.295366] pci 0000:01:05.0: [1002:9612] type 00 class 0x030000
[ 0.295381] pci 0000:01:05.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]
[ 0.295390] pci 0000:01:05.0: reg 0x14: [io 0x5000-0x50ff]
[ 0.295398] pci 0000:01:05.0: reg 0x18: [mem 0xd4300000-0xd430ffff]
[ 0.295417] pci 0000:01:05.0: reg 0x24: [mem 0xd4200000-0xd42fffff]
[ 0.295452] pci 0000:01:05.0: supports D1 D2
[ 0.295598] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.295651] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 0.295656] pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
[ 0.295662] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.295852] pci 0000:02:00.0: [11ab:4357] type 00 class 0x020000
[ 0.295923] pci 0000:02:00.0: reg 0x10: [mem 0xd3100000-0xd3103fff 64bit]
[ 0.295939] pci 0000:02:00.0: reg 0x18: [io 0x3000-0x30ff]
[ 0.296126] pci 0000:02:00.0: supports D1 D2
[ 0.296129] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.296168] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 1.304007] pci 0000:00:04.0: ASPM: Could not configure common clock
[ 1.304191] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 1.304284] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
[ 1.304290] pci 0000:00:04.0: bridge window [mem 0xd3100000-0xd41fffff]
[ 1.304296] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 1.304439] acpiphp: Slot [1] registered
[ 1.304564] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[ 1.304663] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 1.304668] pci 0000:00:07.0: bridge window [mem 0xd2100000-0xd30fffff]
[ 1.304675] pci 0000:00:07.0: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 1.304785] acpiphp: Slot [1-1] registered
[ 1.304937] pci 0000:06:00.0: [14e4:4315] type 00 class 0x028000
[ 1.304969] pci 0000:06:00.0: reg 0x10: [mem 0xd2000000-0xd2003fff 64bit]
[ 1.305124] pci 0000:06:00.0: supports D1 D2
[ 1.316087] pci 0000:00:09.0: PCI bridge to [bus 06]
[ 1.316175] pci 0000:00:09.0: bridge window [mem 0xd2000000-0xd20fffff]
[ 1.316290] pci 0000:00:14.4: PCI bridge to [bus 80-8f] (subtractive decode)
[ 1.316345] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 1.316355] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 1.316358] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 1.316362] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 1.316365] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 1.316368] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[ 1.316372] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 1.316375] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 1.316378] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 1.316382] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 1.316385] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 1.316389] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 1.316392] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 1.316395] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 1.316399] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[ 1.316402] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff window] (subtractive decode)
[ 1.316588] pci_bus 0000:00: on NUMA node 0
[ 1.318021] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) 0, disabled.
[ 1.318630] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) 0, disabled.
[ 1.319236] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) 0, disabled.
[ 1.319842] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) 0, disabled.
[ 1.320509] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) 0, disabled.
[ 1.321193] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) 0, disabled.
[ 1.321887] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) 0, disabled.
[ 1.322584] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) 0, disabled.
[ 1.324317] ACPI: Enabled 9 GPEs in block 00 to 1F
[ 1.324512] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 1.328032] vgaarb: setting as boot device: PCI:0000:01:05.0
[ 1.328074] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.328128] vgaarb: loaded
[ 1.328174] vgaarb: bridge control possible 0000:01:05.0
[ 1.328358] PCI: Using ACPI for IRQ routing
[ 1.339579] PCI: pci_cache_line_size set to 64 bytes
[ 1.339941] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 1.339946] e820: reserve RAM buffer [mem 0xacb70000-0xafffffff]
[ 1.339949] e820: reserve RAM buffer [mem 0xafd4f000-0xafffffff]
[ 1.339952] e820: reserve RAM buffer [mem 0xaff00000-0xafffffff]
[ 1.340319] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.340596] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 1.342708] Switched to clocksource hpet
[ 1.349588] pnp: PnP ACPI init
[ 1.350059] system 00:00: [io 0x0400-0x04cf] could not be reserved
[ 1.350145] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 1.350196] system 00:00: [io 0x04d6] has been reserved
[ 1.350246] system 00:00: [io 0x0680-0x06ff] has been reserved
[ 1.350297] system 00:00: [io 0x077a] has been reserved
[ 1.350347] system 00:00: [io 0x0c00-0x0c01] has been reserved
[ 1.350397] system 00:00: [io 0x0c14] has been reserved
[ 1.350447] system 00:00: [io 0x0c50-0x0c52] has been reserved
[ 1.350498] system 00:00: [io 0x0c6c] has been reserved
[ 1.350548] system 00:00: [io 0x0c6f] has been reserved
[ 1.350598] system 00:00: [io 0x0cd0-0x0cdb] has been reserved
[ 1.350649] system 00:00: [io 0x0220-0x0227] has been reserved
[ 1.350699] system 00:00: [io 0x0260-0x0273] has been reserved
[ 1.350750] system 00:00: [io 0x0800] has been reserved
[ 1.350800] system 00:00: [io 0x0804] has been reserved
[ 1.350850] system 00:00: [io 0x087f] has been reserved
[ 1.350901] system 00:00: [io 0x0cdc-0x0cdf] has been reserved
[ 1.350954] system 00:00: [io 0x0b00-0x0b0f] has been reserved
[ 1.351005] system 00:00: [io 0x0b20-0x0b3f] has been reserved
[ 1.351055] system 00:00: [io 0x0200-0x027f] could not be reserved
[ 1.351109] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.351228] system 00:01: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.351315] system 00:01: [mem 0x000ec000-0x000fffff] could not be reserved
[ 1.351366] system 00:01: [mem 0x00100000-0xbfffffff] could not be reserved
[ 1.351417] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.351467] system 00:01: [mem 0xfeb00000-0xfeb00fff] has been reserved
[ 1.351518] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.351569] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.351620] system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
[ 1.351671] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.351753] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.351881] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.351967] pnp 00:04: Plug and Play ACPI device, IDs SYN0159 SYN0100 SYN0002 PNP0f13 (active)
[ 1.352539] pnp: PnP ACPI: found 5 devices
[ 1.352633] PnPBIOS: Disabled by ACPI PNP
[ 1.392284] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.392337] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 1.392389] pci 0000:00:01.0: bridge window [mem 0xd4200000-0xd43fffff]
[ 1.392442] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.392501] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 1.392550] pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
[ 1.392602] pci 0000:00:04.0: bridge window [mem 0xd3100000-0xd41fffff]
[ 1.392654] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 1.392713] pci 0000:00:07.0: PCI bridge to [bus 03-05]
[ 1.392763] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 1.392815] pci 0000:00:07.0: bridge window [mem 0xd2100000-0xd30fffff]
[ 1.392867] pci 0000:00:07.0: bridge window [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 1.392925] pci 0000:00:09.0: PCI bridge to [bus 06]
[ 1.392977] pci 0000:00:09.0: bridge window [mem 0xd2000000-0xd20fffff]
[ 1.393032] pci 0000:00:14.4: PCI bridge to [bus 80-8f]
[ 1.393082] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
[ 1.393147] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.393151] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.393155] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.393158] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 1.393161] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 1.393165] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 1.393168] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 1.393171] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 1.393175] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 1.393178] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[ 1.393181] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 1.393185] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 1.393188] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 1.393191] pci_bus 0000:00: resource 17 [mem 0xc0000000-0xdfffffff window]
[ 1.393195] pci_bus 0000:00: resource 18 [mem 0xf0000000-0xffffffff window]
[ 1.393198] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 1.393202] pci_bus 0000:01: resource 1 [mem 0xd4200000-0xd43fffff]
[ 1.393205] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.393209] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 1.393212] pci_bus 0000:02: resource 1 [mem 0xd3100000-0xd41fffff]
[ 1.393216] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[ 1.393219] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 1.393222] pci_bus 0000:03: resource 1 [mem 0xd2100000-0xd30fffff]
[ 1.393226] pci_bus 0000:03: resource 2 [mem 0xd1000000-0xd1ffffff 64bit pref]
[ 1.393230] pci_bus 0000:06: resource 1 [mem 0xd2000000-0xd20fffff]
[ 1.393233] pci_bus 0000:80: resource 0 [io 0x1000-0x1fff]
[ 1.393237] pci_bus 0000:80: resource 4 [io 0x0000-0x0cf7 window]
[ 1.393240] pci_bus 0000:80: resource 5 [io 0x0d00-0xffff window]
[ 1.393243] pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.393247] pci_bus 0000:80: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 1.393250] pci_bus 0000:80: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 1.393254] pci_bus 0000:80: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 1.393257] pci_bus 0000:80: resource 10 [mem 0x000d0000-0x000d3fff window]
[ 1.393260] pci_bus 0000:80: resource 11 [mem 0x000d4000-0x000d7fff window]
[ 1.393264] pci_bus 0000:80: resource 12 [mem 0x000d8000-0x000dbfff window]
[ 1.393267] pci_bus 0000:80: resource 13 [mem 0x000dc000-0x000dffff window]
[ 1.393270] pci_bus 0000:80: resource 14 [mem 0x000e0000-0x000e3fff window]
[ 1.393274] pci_bus 0000:80: resource 15 [mem 0x000e4000-0x000e7fff window]
[ 1.393277] pci_bus 0000:80: resource 16 [mem 0x000e8000-0x000ebfff window]
[ 1.393281] pci_bus 0000:80: resource 17 [mem 0xc0000000-0xdfffffff window]
[ 1.393284] pci_bus 0000:80: resource 18 [mem 0xf0000000-0xffffffff window]
[ 1.393397] NET: Registered protocol family 2
[ 1.393762] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 1.393875] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.393966] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.394110] TCP: reno registered
[ 1.394191] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.394250] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.394381] NET: Registered protocol family 1
[ 1.394447] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 1.616207] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 1.672115] pci 0000:01:05.0: Video device with shadowed ROM
[ 1.672204] Unpacking initramfs...
[ 2.574735] Freeing initrd memory: 33432K (f5958000 - f79fe000)
[ 2.575146] microcode: CPU0: patch_level=0x02000057
[ 2.575202] microcode: CPU1: patch_level=0x02000057
[ 2.575351] microcode: Microcode Update Driver: v2.00 tigran@aivazian.fsnet.co.uk, Peter Oruba
[ 2.575997] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 2.576162] audit: initializing netlink subsys (disabled)
[ 2.576237] audit: type=2000 audit(1544513896.576:1): initialized
[ 2.576780] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.576859] zpool: loaded
[ 2.577046] VFS: Disk quotas dquot_6.5.2
[ 2.577140] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.578119] alg: No test for stdrng (krng)
[ 2.578206] bounce: pool size: 64 pages
[ 2.578291] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.579558] io scheduler noop registered
[ 2.579610] io scheduler deadline registered
[ 2.579675] io scheduler cfq registered (default)
[ 2.580273] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.580389] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.580565] GHES: HEST is not enabled!
[ 2.580675] isapnp: Scanning for PnP cards...
[ 2.965263] isapnp: No Plug & Play device found
[ 2.965482] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.966659] Linux agpgart interface v0.103
[ 2.967108] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.969114] i8042: Detected active multiplexing controller, rev 1.1
[ 2.970190] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.970244] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.970345] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.970471] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.970599] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.970962] mousedev: PS/2 mouse device common for all mice
[ 2.971143] rtc_cmos 00:02: RTC can wake from S4
[ 2.971433] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.971525] rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
[ 2.971613] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.972185] TCP: cubic registered
[ 2.972340] NET: Registered protocol family 10
[ 2.972784] mip6: Mobile IPv6
[ 2.972840] NET: Registered protocol family 17
[ 2.972902] mpls_gso: MPLS GSO support
[ 2.973280] Using IPI No-Shortcut mode
[ 2.973725] registered taskstats version 1
[ 2.974669] rtc_cmos 00:02: setting system clock to 2018-12-11 07:38:17 UTC (1544513897)
[ 2.974868] PM: Hibernation image not present or could not be loaded.
[ 2.975417] Freeing unused kernel memory: 664K (c16e5000 - c178b000)
[ 2.975569] Write protecting the kernel text: 4940k
[ 2.975704] Write protecting the kernel read-only data: 1548k
[ 2.975753] NX-protecting the kernel data: 3252k
[ 2.995724] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.040688] systemd-udevd[65]: starting version 215
[ 3.041320] random: systemd-udevd urandom read with 0 bits of entropy available
[ 3.063647] ACPI: bus type USB registered
[ 3.063788] usbcore: registered new interface driver usbfs
[ 3.063893] usbcore: registered new interface driver hub
[ 3.063896] SCSI subsystem initialized
[ 3.066397] usbcore: registered new device driver usb
[ 3.068911] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.069362] sky2: driver version 1.30
[ 3.069668] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.069822] sky2 0000:02:00.0: Yukon-2 FE+ chip revision 0
[ 3.071110] ehci-pci: EHCI PCI platform driver
[ 3.071618] QUIRK: Enable AMD PLL fix
[ 3.071662] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 3.071727] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 3.071797] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.071861] ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 3.072077] sky2 0000:02:00.0 eth0: addr 00:25:b3:53:da:6a
[ 3.072241] ehci-pci 0000:00:12.2: debug port 1
[ 3.072813] ehci-pci 0000:00:12.2: irq 17, io mem 0xd4409500
[ 3.078738] libata version 3.00 loaded.
[ 3.084087] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 3.084255] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.084342] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.084397] usb usb1: Product: EHCI Host Controller
[ 3.084446] usb usb1: Manufacturer: Linux 4.0.0-kali1-686-pae ehci_hcd
[ 3.084497] usb usb1: SerialNumber: 0000:00:12.2
[ 3.086194] hub 1-0:1.0: USB hub found
[ 3.086297] hub 1-0:1.0: 6 ports detected
[ 3.086991] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 3.087049] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 3.087110] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 3.087166] ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 3.087236] ehci-pci 0000:00:13.2: debug port 1
[ 3.087350] ehci-pci 0000:00:13.2: irq 19, io mem 0xd4409400
[ 3.096085] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.096261] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.096349] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.096404] usb usb2: Product: EHCI Host Controller
[ 3.096453] usb usb2: Manufacturer: Linux 4.0.0-kali1-686-pae ehci_hcd
[ 3.096526] usb usb2: SerialNumber: 0000:00:13.2
[ 3.096825] hub 2-0:1.0: USB hub found
[ 3.096915] hub 2-0:1.0: 6 ports detected
[ 3.097744] ohci-pci: OHCI PCI platform driver
[ 3.098101] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 3.098161] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 3.098264] ohci-pci 0000:00:12.0: irq 16, io mem 0xd4408000
[ 3.141759] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.141812] ACPI: Thermal Zone [CPUZ] (52 C)
[ 3.156145] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.156238] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.156299] usb usb3: Product: OHCI PCI host controller
[ 3.156353] usb usb3: Manufacturer: Linux 4.0.0-kali1-686-pae ohci_hcd
[ 3.156410] usb usb3: SerialNumber: 0000:00:12.0
[ 3.156697] hub 3-0:1.0: USB hub found
[ 3.156797] hub 3-0:1.0: 3 ports detected
[ 3.157094] ahci 0000:00:11.0: version 3.0
[ 3.157329] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 3.157396] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pio ccc
[ 3.158732] scsi host0: ahci
[ 3.158962] scsi host1: ahci
[ 3.159117] ata1: SATA max UDMA/133 abar m1024@0xd4409000 port 0xd4409100 irq 20
[ 3.159174] ata2: SATA max UDMA/133 abar m1024@0xd4409000 port 0xd4409180 irq 20
[ 3.159502] ohci-pci 0000:00:12.1: OHCI PCI host controller
[ 3.159560] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 3.159649] ohci-pci 0000:00:12.1: irq 16, io mem 0xd4407000
[ 3.164661] thermal LNXTHERM:01: registered as thermal_zone1
[ 3.164745] ACPI: Thermal Zone [GFXZ] (30 C)
[ 3.200439] ssb: Found chip with id 0x4312, rev 0x01 and package 0x00
[ 3.200813] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[ 3.201128] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[ 3.201237] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[ 3.201243] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[ 3.216248] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.216340] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.216395] usb usb4: Product: OHCI PCI host controller
[ 3.216444] usb usb4: Manufacturer: Linux 4.0.0-kali1-686-pae ohci_hcd
[ 3.216493] usb usb4: SerialNumber: 0000:00:12.1
[ 3.216842] hub 4-0:1.0: USB hub found
[ 3.216903] hub 4-0:1.0: 3 ports detected
[ 3.217329] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 3.217387] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 3.217476] ohci-pci 0000:00:13.0: irq 17, io mem 0xd4406000
[ 3.256708] ssb: Sonics Silicon Backplane found on PCI device 0000:06:00.0
[ 3.276119] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.276208] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.276263] usb usb5: Product: OHCI PCI host controller
[ 3.276313] usb usb5: Manufacturer: Linux 4.0.0-kali1-686-pae ohci_hcd
[ 3.276362] usb usb5: SerialNumber: 0000:00:13.0
[ 3.276688] hub 5-0:1.0: USB hub found
[ 3.276749] hub 5-0:1.0: 3 ports detected
[ 3.277151] ohci-pci 0000:00:13.1: OHCI PCI host controller
[ 3.277208] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 3.277291] ohci-pci 0000:00:13.1: irq 17, io mem 0xd4405000
[ 3.336118] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.336170] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.336225] usb usb6: Product: OHCI PCI host controller
[ 3.336274] usb usb6: Manufacturer: Linux 4.0.0-kali1-686-pae ohci_hcd
[ 3.336324] usb usb6: SerialNumber: 0000:00:13.1
[ 3.336624] hub 6-0:1.0: USB hub found
[ 3.336687] hub 6-0:1.0: 3 ports detected
[ 3.337000] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 3.337057] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 3.337147] ohci-pci 0000:00:14.5: irq 18, io mem 0xd4404000
[ 3.396098] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 3.396191] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.396242] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.396297] usb usb7: Product: OHCI PCI host controller
[ 3.396346] usb usb7: Manufacturer: Linux 4.0.0-kali1-686-pae ohci_hcd
[ 3.396396] usb usb7: SerialNumber: 0000:00:14.5
[ 3.396654] hub 7-0:1.0: USB hub found
[ 3.396718] hub 7-0:1.0: 2 ports detected
[ 3.408072] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 3.476055] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.476154] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.478132] ata1.00: ATA-8: WDC WD3200BEVT-60ZCT1, 13.01A13, max UDMA/100
[ 3.478184] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.480329] ata1.00: configured for UDMA/100
[ 3.480617] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-6 1A13 PQ: 0 ANSI: 5
[ 3.490685] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633M, 0200, max UDMA/100
[ 3.506445] ata2.00: configured for UDMA/100
[ 3.509416] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633M 0200 PQ: 0 ANSI: 5
[ 3.520276] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.521663] sd 0:0:0:0: [sda] Write Protect is off
[ 3.521722] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.521757] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.538563] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.538640] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.538951] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.539912] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.540092] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.572271] sda: sda1 sda2
[ 3.572936] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.578844] usb 2-2: New USB device found, idVendor=04f2, idProduct=b159
[ 3.578901] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 3.578951] usb 2-2: Product: CNF8243
[ 3.579017] usb 2-2: Manufacturer: Chicony Electronics Co., Ltd.
[ 3.579067] usb 2-2: SerialNumber: SN0001
[ 3.716906] usb 1-5: New USB device found, idVendor=090c, idProduct=1000
[ 3.716965] usb 1-5: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[ 3.717016] usb 1-5: Product: USB DISK
[ 3.717063] usb 1-5: SerialNumber: 16111407002071
[ 3.721056] usb-storage 1-5:1.0: USB Mass Storage device detected
[ 3.721580] scsi host2: usb-storage 1-5:1.0
[ 3.721824] usbcore: registered new interface driver usb-storage
[ 3.722829] usbcore: registered new interface driver uas
[ 4.146099] ntfs: driver 2.1.31 [Flags: R/W MODULE].
[ 4.218074] ntfs: volume version 3.1.
[ 4.478228] ntfs: volume version 3.1.
[ 5.440897] scsi 2:0:0:0: Direct-Access PQ: 0 ANSI: 6
[ 5.441549] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 5.443754] sd 2:0:0:0: [sdb] 30310400 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 5.445358] sd 2:0:0:0: [sdb] Write Protect is off
[ 5.445409] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 5.446854] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.456902] sdb: sdb1 sdb2
[ 5.462820] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 5.563159] random: nonblocking pool is initialized
[ 5.822249] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 5.843615] aufs: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.845525] aufs 4.0-20150525
[ 5.863340] loop: module loaded
[ 6.101621] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 7.030686] uhci_hcd: USB Universal Host Controller Interface driver
[ 12.427585] device-mapper: uevent: version 1.0.3
[ 12.428284] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
[ 12.535768] ntfs: volume version 3.1.
[ 13.847421] ntfs: volume version 3.1.
[ 15.226987] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 15.611235] EXT4-fs (sdb2): warning: maximal mount count reached, running e2fsck is recommended
[ 15.619049] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 17.172599] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 17.172930] systemd[1]: Detected architecture 'x86'.
[ 17.288392] systemd[1]: Inserted module 'autofs4'
[ 17.291900] systemd[1]: Set hostname to
try sudo apt update && sudo apt install bcmwl-kernel-source
root@kali:~# sudo apt install bcmwl-kernel-source
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package bcmwl-kernel-source
root@kali:~# sudo apt update && sudo apt install bcmwl-kernel-source
Ign:1 http://cdn-fastly.deb.debian.org/debian jessie InRelease
Ign:2 http://cdn-fastly.deb.debian.org/debian stretch InRelease
Hit:3 http://cdn-fastly.deb.debian.org/debian jessie Release
Hit:4 http://cdn-fastly.deb.debian.org/debian stretch Release
Reading package lists... Done
Building dependency tree
Reading state information... Done
1892 packages can be upgraded. Run 'apt list --upgradable' to see them.
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package bcmwl-kernel-source
I"m on kali 2016.2 and my sources list: deb http://httpredir.debian.org/debian/ stretch main contrib non-free deb http://http.debian.net/debian/ jessie main contrib non-free
So... what"s now??
I really dont understand,not woking ...Today i put kali 2018.4 ,and after 24 hours of full upgrade/update all apps and drivers are fully upgraded with synaptic. I run wifite2 but still no clients detect no hanshake capture/ no station name .Maibe im a noob but i dont understant what im missing. is the broadcom driver fault?? kernel version?? Can someone explaine me step by step what to do to get working?? I have to patch drivers/kernel for injection or what??? Pls help step by step tutorial and commands. The only working verssion with no problems is Kali 2.0 .....none of the rest versions is working
The same issue. B43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07). Wifite found many wireless aps,but all aps have no client! Linux kali 5.2.0-kali2-amd64 #1 SMP Debian 5.2.9-2kali1 (2019-08-22) x86_64 GNU/Linux
same issue...eveything is working fine.monitor n all..but not detecting any wifi networks..plz help
If you see your log you are using a Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) wifi card. I assume you are using a dell laptop. For some reason, those cards even with b43 driver can't capture clients. I also hava this wifi card, and it is useless I think for handshake capture
The only solution I know is to purchase a wifi card that support monitor mode, like some alfa models
I have an external alpha card that supports monitor mode. airodump-ng detect lots of networks but not even one client. In any of them. Yestarday it worked fine at another location. Some idea of what can I check/fix ?
Ok,im out of try solutions,no clue. I use wifite/wifite2 and others wifi pentest on kali sana 2.0 .Everything working fine ,capture handshake,clients detect etc....well... wen i install others versions of kali, 2016/2017.2 ..2018.1/ 2018.4 ...all with apt-get update/upgrade, nothing working... no handshake,no clients detect on wirless scan...no nothing! I run kali on laptop with inside incorporate broadcom no usb external...Can someone help me because im stuck no clue what to do, the onli version of kali that is working for me is 2.0 and lower..BT5 etc. Pls help.