search

derv82 / wifite2

Rewrite of the popular wireless network auditor, "wifite"
GNU General Public License v2.0
6.45k stars 1.32k forks source link

Wifite On Nethunter terminal scrolling instead of updating #187

Open MoistBit opened 5 years ago

MoistBit commented 5 years ago

Hi, just wondering if there is a fix for a issue where wifite will create or dump new lines instead of refreshing while scanning for networks. Running Nethunter 3.0 lolipop with nethunter terminal. Fresh install displays as it should, but after updating and upgrading the system it does not.

Example:

root@Quim:~# wifite . .
.´ · . . · . wifite 2.2.5 : : : (¯) : : : automated wireless auditor . · /¯\ ´ · .´ https://github.com/derv82/wifite2 /¯¯¯\ ´

[!] Warning: Recommended app hcxdumptool was not found. install @ https://github.com/ZerBea/hcxdumptool [!] Warning: Recommended app hcxpcaptool was not found. install @ https://github.com/ZerBea/hcxtools [!] Conflicting processes: NetworkManager (PID 555), wpa_supplicant (PID 662), dhclient (PID 9291) [!] If you have problems: kill -9 PID or re-run wifite with --kill)

Interface   PHY   Driver              Chipset

  1. wlan0 phy1 iwlwifi Intel Corporation Wireless 7265 (rev 61)

    [+] enabling monitor mode on wlan0... enabled wlan0mon

    NUM ESSID CH ENCR POWER WPS? CLIENT

    1 Linksys37967 11 WPA 58db no
    2 TNCAP3760DD 11 WPA 45db no 2
    [+] select target(s) (1-5) separated by commas, dashes or all:
    root@Quim:~# wifite . .
    .´ · . . · . wifite 2.2.5 : : : (¯) : : : automated wireless auditor . · /¯\ ´ · .´ https://github.com/derv82/wifite2 /¯¯¯\ ´

    [!] Warning: Recommended app hcxdumptool was not found. install @ https://github.com/ZerBea/hcxdumptool [!] Warning: Recommended app hcxpcaptool was not found. install @ https://github.com/ZerBea/hcxtools [!] Conflicting processes: NetworkManager (PID 555), wpa_supplicant (PID 662), dhclient (PID 9291) [!] If you have problems: kill -9 PID or re-run wifite with --kill)

    Interface PHY Driver Chipset

  2. wlan0 phy1 iwlwifi Intel Corporation Wireless 7265 (rev 61)

    [+] enabling monitor mode on wlan0... enabled wlan0mon

    NUM ESSID CH ENCR POWER WPS? CLIENT

    1 Linksys37967 11 WPA 58db no
    2 TNCAP3760DD 11 WPA 45db no 2
    3 Brenda 6 WPA 33db yes 5
    4 The Promised LAN 1 WPA 21db yes 2
    5 HP-Print-14-Officejet... 1 WPA 19db no
    [+] select target(s) (1-5) separated by commas, dashes or all:

... and so on for every update.

Czechball commented 5 years ago

Hello, I also had this issue. In the terminal emulator, go to settings and change the font size to 8. Now the text is small enough for dumps to fit on a portrait screen. I hope this helps.

hxrofo commented 5 years ago

sorry to jump in, but i noticed that your monitor interface is wlan0, which means (afaik), the internal wifi card of your phone. are you using nexmon to set monitor mode, with the command "source monstart-nh" ?