[NAOMI] emulator can't save settings

[GoogleCodeExporter]

For some games, there is need to edit in-system config (change type of the 
cabinet, or change number of players), but when I'm change it, settings won't 
saved. That bug in all NAOMI revisions, from 1.0.3 to 1.0.4 rev.50

Original issue reported on code.google.com by old.liq...@gmail.com on 14 Jul 2010 at 7:04

[GoogleCodeExporter]

I'm working on it, bios for some reason isn't saving SRam when it should. 
EEPROM is saved, loaded, honored, then overwritten by defaults for a reason 
unknown. Apparently this is SDK internal code as it runs over multiple games. 
Anyway, if I can find out why the EEPROM isn't kept as it is received I will 
fix it.

Original comment by Training...@gmail.com on 27 Oct 2010 at 8:17

[GoogleCodeExporter]

Thanks, because some games unplayable or not launch until you change system 
config.

Original comment by old.liq...@gmail.com on 31 Oct 2010 at 3:12

[GoogleCodeExporter]

Can this be tested again with r118? I only tried one game and it saved and 
loaded correctly.

Maybe the filename+path is too long in this case.

Original comment by KrossX3 on 18 Dec 2010 at 8:18

[GoogleCodeExporter]

r65 - system menu work, r83 - system menu work, r108 -system menu DON'T work, 
r119 - system menu DON'T work. So I can't check these changes. 

Original comment by old.liq...@gmail.com on 19 Dec 2010 at 8:29

Attachments:

• r108log.txt

[GoogleCodeExporter]

r119 ...

http://img340.imageshack.us/img340/7720/86646604.jpg

Not only I have no problem accessing that menu, but the EEPROM also gets saved 
and loaded correctly. It then crashes for another reason, but that's outside 
this issue. =P

Original comment by KrossX3 on 19 Dec 2010 at 10:35

[GoogleCodeExporter]

My bad, I made a typo on the lst fine. It's actually working and not crashing.

http://img833.imageshack.us/img833/708/57989922.jpg

Original comment by KrossX3 on 19 Dec 2010 at 10:58

[GoogleCodeExporter]

T_T *GREED*

All I see - blackscreen after F4 ((

Original comment by old.liq...@gmail.com on 20 Dec 2010 at 8:16

[GoogleCodeExporter]

Oh, I forgot - I use WinXP SP3 Pro x86 and FW197 video drivers.

Original comment by old.liq...@gmail.com on 20 Dec 2010 at 10:49

[GoogleCodeExporter]

Probably a problem with your dump or your list file. Not an emulator problem so 
far.

Original comment by KrossX3 on 20 Dec 2010 at 4:18

[GoogleCodeExporter]

Nope. I test not only exelica, but GGXX and mbac all goes blackscreen after F4. 
This is absolutely emulator issue. System menu works on r84 also at all these 
roms, so I'm sure all roms and lst proper made.

Original comment by old.liq...@gmail.com on 20 Dec 2010 at 4:32

[GoogleCodeExporter]

Then why would it be working fine here, but not for you.... that puzzles me. 
Unless I can reproduce it, I cannot even attempt to look at it. =S

Original comment by KrossX3 on 21 Dec 2010 at 4:25

[GoogleCodeExporter]

Hmm, I change the video card to Radeon x1300 256mb but noting changes((

Original comment by old.liq...@gmail.com on 21 Dec 2010 at 9:05

[GoogleCodeExporter]

Post the information of the console when it goes all black please.

Also, please attach your configuration file.

Original comment by KrossX3 on 21 Dec 2010 at 9:37

[GoogleCodeExporter]

Aha, I found it!!! Improper config by default generated by some revisions of 
nullDC, and I simply repost it to the new revisions, so it also not working...

First file - actual working config from r83
Second - not working config from r108

Original comment by old.liq...@gmail.com on 22 Dec 2010 at 2:12

Attachments:

• nullDC.cfg
• nullDC.rar

[GoogleCodeExporter]

All this, for just the z-buffer setting. ¬_¬

Original comment by KrossX3 on 22 Dec 2010 at 2:50

[GoogleCodeExporter]

Original comment by KrossX3 on 22 Dec 2010 at 2:52

• Changed state: Invalid