QHY cameras, unable to establish connection

[0ctane]

I have 2 qhy cameras that don't want to connect. QHY163M and QHY-II-5-M. Raspberry Pi 4. Astroarch 1.9 release.

kstars-3.7.3-1-aarch64 is up to date astro_dmx-2.9.7-1-aarch64 is up to date astrometry.net-0.96-1-aarch64 is up to date libindi-2.1.0-1-aarch64 is up to date

The Ekos console panel says:

2024-10-11T17:54:14 Unable to establish:

• QHY CCD Please ensure the device is connected and powered on.

dmesg show the devices connect:

[ 4169.457871] usb 1-1.3: new high-speed USB device number 13 using xhci_hcd [ 4169.558226] usb 1-1.3: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64 [ 4169.558278] usb 1-1.3: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64 [ 4169.558637] usb 1-1.3: New USB device found, idVendor=1618, idProduct=0921, bcdDevice= 0.00 [ 4169.558660] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4169.558675] usb 1-1.3: Product: QHY5-II
[ 4169.558688] usb 1-1.3: Manufacturer: QHY-CCD

When trying to start up the connection, a dialog appears saying, "INDI Driver indi_qhy_ccd crashed."

[MattBlack85]

hi @0ctane can you try the following command and report back the output?

indiserver -vvv indi_qhy_ccd

[0ctane]

@MattBlack85 , that command did show problems with the connection, but it looks like by fixing #116, this is resolved. Thanks!