Hello, I integrated the Tild with HA using the script and by configuring my Mosquitto bridge. Everything was working well (turning the lights on/off, turning the pump on/off, etc...). However, after about a week, I noticed that the temperature remained the same, so I checked the Mosquitto log and found this error: Client local.core-mosquitto.tild_bridge disconnected: Connection refused.
As a result, nothing is working anymore, neither IN nor OUT.
I verified that the IP address of the Tild hasn’t changed, and I tried turning the Tild off and on again, but it didn’t help.
Thank you for your assistance.
UPDATE: I just noticed that in my local network, I have two Tild devices showing up with two different IP addresses and two different MAC addresses. When I connect to the second IP, everything works.
However, I still have a persistent issue: I can turn on the pump and the lights, but I can’t turn them off. The buttons don’t retain their state (when I turn them on), almost as if I’m not receiving any state updates.
Here’s what happens when I test turning off and on manually with MQTT. It works very well with Topic: tild_70B8F646E580/u8_w/light_state/info/desired Payload: "0" or "1"
But at the same time, I’m listening to tild_70B8F646E580/u8_w/light_state/info/reported, and it consistently stays at 0. So the state isn’t being sent back.
Hello, I integrated the Tild with HA using the script and by configuring my Mosquitto bridge. Everything was working well (turning the lights on/off, turning the pump on/off, etc...). However, after about a week, I noticed that the temperature remained the same, so I checked the Mosquitto log and found this error: Client local.core-mosquitto.tild_bridge disconnected: Connection refused.
As a result, nothing is working anymore, neither IN nor OUT.
I verified that the IP address of the Tild hasn’t changed, and I tried turning the Tild off and on again, but it didn’t help.
Thank you for your assistance.
UPDATE: I just noticed that in my local network, I have two Tild devices showing up with two different IP addresses and two different MAC addresses. When I connect to the second IP, everything works.
However, I still have a persistent issue: I can turn on the pump and the lights, but I can’t turn them off. The buttons don’t retain their state (when I turn them on), almost as if I’m not receiving any state updates.
Here’s what happens when I test turning off and on manually with MQTT. It works very well with Topic: tild_70B8F646E580/u8_w/light_state/info/desired Payload: "0" or "1"
But at the same time, I’m listening to tild_70B8F646E580/u8_w/light_state/info/reported, and it consistently stays at 0. So the state isn’t being sent back.