search

develsoftware / GMinerRelease

Ethash, ProgPoW, Equihash, CuckooCycle GPU Miner
https://bitcointalk.org/index.php?topic=5034735.0
1.95k stars 331 forks source link

No Improvement on LHR - 2.75v #605

Open CryptoLLC opened 2 years ago

CryptoLLC commented 2 years ago

Version 2.75 Says there is a huge improvement of Ether. We have 100+ cards - 3080, 3080ti and 3090. We see zero improvement. Not even 1 mhs. How is this version any better then 2.74? Only the fee went up with zero speed increase.

dedizones commented 2 years ago

On boot:image

Rig stable:

image

CryptoLLC commented 2 years ago

Our 3080 are still at 73-74 with zero improvement. 3080ti was at 85 before on 2.75v. So going from 85 to 88-89~ is not a huge improvement. The most important is the 3080. Which has seen absolute zero improvement.

dedizones commented 2 years ago

Our 3080 are still at 73-74 with zero improvement. 3080ti was at 85 before on 2.75v. So going from 85 to 88-89~ is not a huge improvement. The most important is the 3080. Which has seen absolute zero improvement.

it's more stable than before I must admit but it's true compared to TREX where I do 91/92MHs with my 3080Ti, 61Mhs with 3070Ti

More over, putting 1% in fees while eth is at its lowest is really being a bad player / dev

we undergo increases in electricity of +50% if we now have to give 1 hour of mining over 24 hours we will never get out of it

Kali123411 commented 2 years ago

upgrade

CryptoLLC commented 2 years ago

We were getting 73-74mhs before 2.75 and now we get the same exact value of 73-74 on 2.75. Zero improvement. Maybe on 3060 or 3070 there is an improvement. Based on the images it looks like you got a 2% increase. Such a huge improvement................. Sarcasm.............. They should not be naming this update as some huge upgrade. Mediocre at best. Almost not noticeable. If we got 5-10% upgrade, now that would be awesome.

Kali123411 commented 2 years ago

We were getting 73-74mhs before 2.75 and now we get the same exact value of 73-74 on 2.75. Zero improvement. Maybe on 3060 or 3070 there is an improvement. Based on the images it looks like you got a 2% increase. Such a huge improvement................. Sarcasm.............. They should not be naming this update as some huge upgrade. Mediocre at best. Almost not noticeable. If we got 5-10% upgrade, now that would be awesome.

Yuuuuuge improvements, now that the Dev Fee isn't competitive I may as well move all my rigs over to Trex miner now....

dedizones commented 2 years ago

Yuuuuuge improvements, now that the Dev Fee isn't competitive I may as well move all my rigs over to Trex miner now....

+1

We were getting 73-74mhs before 2.75 and now we get the same exact value of 73-74 on 2.75. Zero improvement. Maybe on 3060 or 3070 there is an improvement. Based on the images it looks like you got a 2% increase. Such a huge improvement................. Sarcasm.............. They should not be naming this update as some huge upgrade. Mediocre at best. Almost not noticeable. If we got 5-10% upgrade, now that would be awesome.

yes i try 3080 LHR is bery bad yes !

74.40 MH + 1% fee >.<

Miiichal commented 2 years ago

My RTX 3080 LHR was not at speeds you are talking about guys (71-74MHs) - maybe i have not much OC like you... but with the same setting i am slightly faster now...

with 2.74 i had about 68.7MHs (TRex 69.9MHs) with 2.75 i have about 70.8MHs So there is SOME improvement, but not "major"... maybe stability, but not tested long yet.

My RTX 3070Ti - no improvement (still somewher about 60MHs)

dedizones commented 2 years ago

My RTX 3080 LHR was not at speeds you are talking about guys (71-74MHs) - maybe i have not much OC like you... but with the same setting i am slightly faster now...

with 2.74 i had about 68.7MHs (TRex 69.9MHs) with 2.75 i have about 70.8MHs So there is SOME improvement, but not "major"... maybe stability, but not tested long yet.

My RTX 3070Ti - no improvement (still somewher about 60MHs)

be very careful you have cards with poor quality pads... like at gigabyte

many miners now cheat on the hashrate or they make an average over 1 minute which gives lower performance, or sometimes keeps the highest value!!

So the real stats are what the pool will get!

Miiichal commented 2 years ago

be very careful you have cards with poor quality pads... like at gigabyte many miners now cheat on the hashrate or they make an average over 1 minute which gives lower performance, or sometimes keeps the highest value!! So the real stats are what the pool will get!

Its Palit GamingPro and Gainward Phoenix - mem temps 82 - so its OK, but dunno why I have lower hashrates. Nevermind... I only wanted to report, that maybe 3080 and better has some improvements...

dedizones commented 2 years ago

be very careful you have cards with poor quality pads... like at gigabyte many miners now cheat on the hashrate or they make an average over 1 minute which gives lower performance, or sometimes keeps the highest value!! So the real stats are what the pool will get!

Its Palit GamingPro and Gainward Phoenix - mem temps 82 - so its OK, but dunno why I have lower hashrates. Nevermind... I only wanted to report, that maybe 3080 and better has some improvements...

change crypto, go RVN or ERGO stop mining ETH if you are complaining about the hashrate of your LHRs, or maybe you should have bought non-LHR cards!