schemas: i2c: Add the clock stretching property

[ashyti]

The I2C specification allows for the clock line to be held low for a specified timeout to force the slave device into a 'wait' mode. This feature is known as 'Clock stretching' and is optional.

In the NXP I2C specification, clock stretching is described as the process of pausing a transaction by holding the SCL line LOW. The transaction can only continue when the line is released HIGH again.[*] However, most target devices do not include an SCL driver and are therefore unable to stretch the clock.

Add the following properties:

• i2c-scl-clk-low-timeout-ms: This property specifies the duration, in milliseconds, for which the clock is kept low and a client needs to detect a forced waiting state.

• i2c-scl-has-clk-low-timeout: This property specifies whether the I2C controller implements the clock stretching property.

It's important to note that this feature should not be confused with the SMBUS clock timeout, which serves a similar function but specifies a timeout of 25-35ms. The I2C specification does not recommend any specific timeout.

[*] NXP, UM10204 - I2C-bus specification and user manual Rev. 7.0, 1 October 2021, chapter 3.1.9.

[ashyti]

Hi,

just adding two properties to the i2c schema

Andi

[ashyti]

sorry, closed it by mistake :)