search

devolo / dlan-openwrt

[WIP incomplete] This is the devolo dLAN package feed for OpenWrt/LEDE.
12 stars 6 forks source link

Compiled FW, but PLC does not start #4

Closed phpaiva closed 5 years ago

phpaiva commented 5 years ago

I've compiled a firmware with .pib and .nvm in /feeds/dlan/dlan-fw/qca/dlan-pro-1200-ac/

The PLC interface still down. I see "plc" in services and I can start it, and see "running" in its status... but it isn't working (the PLC Led is off too).

Any clue to debug this?

Thanks!

Pablo.

phpaiva commented 5 years ago

I inspected the .pib file as ascii text and there I found something like "dlan 1000 duo". Using a properly .pib did the trick, and if you do the same with it you can find "dlan 1200+" in a line. If you will try a .pib which has not been extracted from the exactly base firmware of the device (like in my case, in which i've lost the "original" firmware), maybe doing this verification will help you in the search of a correct .pib.

At this moment the PLC interface seems to be working, but the issue with the LED still persist. I'll close the issue because the main trouble was the functionality.

Thanks.