CW LED settings not saved

[WD8BXS]

Your firmware version: 2.11.91 Your bootloader version: 5.0.4 (Please note, we will generally not accept issue reports if your bootloader is not at least 5.0.1)

Hardware

• UI Board: mcHF 0.x / OVI40 1.x 6.3
• RF Board: mcHF 0.x / OVI40 1.x 6.3

Describe the issue:

**I just noticed that the CW LED on/off settings will not save. Once turned off in the CW menu and unit is powered off then on, the LED is back to the on setting.

I wonder if this can be fixed??

Thanks, vy 73, de WD8BXS, Chuck**

[db4ple]

I worked on this, needs some testing. With that change all relevant CW decoder settings (those which can be controlled via menu) will be saved.

[WD8BXS]

Oh WOW, thanks so much, I will keep an eye out for the firmware update!

De Chuck

From: db4ple notifications@github.com Sent: Monday, November 30, 2020 3:12 PM To: df8oe/UHSDR UHSDR@noreply.github.com Cc: WD8BXS helichuck@frontier.com; Author author@noreply.github.com Subject: Re: [df8oe/UHSDR] CW LED settings not saved (#1881)

I worked on this, needs some testing. With that change all relevant CW decoder settings (those which can be controlled via menu) will be saved.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/df8oe/UHSDR/issues/1881#issuecomment-736015698 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AF7F6U55O33CRBTDPF5RR2TSSP4AHANCNFSM4UE6SZFA . https://github.com/notifications/beacon/AF7F6UYXXGI5QTZTUNMIP2DSSP4AHA5CNFSM4UE6SZFKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOFPPLKUQ.gif

[WD8BXS]

Thanks so much for addressing this issue!!

Chuck WD8BXS