search

df8oe / UHSDR

SDR firmware and bootloader with configuration files for use with Eclipse, EmBitz and Makefile
Other
358 stars 188 forks source link

cannot select menue item #544

Closed pointhi closed 8 years ago

pointhi commented 8 years ago

when I'm inside the menue, I should be able to select a menue item using M2 (when reading the manual correctly). But no button at all is able to select the menue entries. Switching to another menue-item using ENC2 for example is not a problem. The Button works, because in normale mode I'm able to change options on the display using M2 so it seems to be a firmware bug.

I'm using a mcHF v0.5 with an up-to-date firmware.

73, OE5TPO

DD4WH commented 8 years ago

Hi! Use encoder 3 to select entries in the menu. I do not know which manual you read, but there has -to my knowledge- never been a possibility to select menu entries by buttons. If this solves your problem, please close this issue. 73 de Frank

pointhi commented 8 years ago

thx. I thought I tried every knob on the device.