Hello everyone. Today I installed soft with GUI configuration on RP2040. For now, I just connected the BMP280 sensor. values from the sensor alt=0 vspd=0, only Tmp1 shows the current temperature. Hardware configuration is Flysky with IBUS. The sensors used worked properly with the Arduino boards (only communication with the RX poured out after a random time), i.e. the BMPs are ok. Please help in configuring the RP. Regards
Hello everyone. Today I installed soft with GUI configuration on RP2040. For now, I just connected the BMP280 sensor. values from the sensor alt=0 vspd=0, only Tmp1 shows the current temperature. Hardware configuration is Flysky with IBUS. The sensors used worked properly with the Arduino boards (only communication with the RX poured out after a random time), i.e. the BMPs are ok. Please help in configuring the RP. Regards