search

dguerizec / grbl-Mega-4axis

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Mega2560
https://github.com/gnea/grbl/wiki
Other
42 stars 13 forks source link

Supported hardware #7

Open michalelektryk opened 1 year ago

michalelektryk commented 1 year ago

Hi, what kind of mega shield I'll have to use to make it run? Are you using rams 1.4 or some custom pcb?

aes92000 commented 1 year ago

I made my own pcb based on a grbl shield. I had a few professionally made.

I supports 6 axis and total of 6 output relay controls Cool & mist (M7, M8, M9) R1 to R4 (M85, M86, M87, M88) All toggle on off and M89 all R? Off

I will send you a board if give me address to mail to. I will solder everything on my board but you will need the mega. I will send the Grbl firmware I use also.

I use bCNC to run my machine

On Fri, Dec 30, 2022, 06:38 michalelektryk @.***> wrote:

Hi, what kind of mega shield I'll have to use to make it run? Are you using rams 1.4 or some custom pcb?

— Reply to this email directly, view it on GitHub https://github.com/dguerizec/grbl-Mega-4axis/issues/7, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB3TD6FKYYTN5NEUPPHWWZ3WP3JTHANCNFSM6AAAAAATM3QJ3I . You are receiving this because you are subscribed to this thread.Message ID: @.***>

michalelektryk commented 1 year ago

Thanks! I'll be very glad to play with your board and hopefully finish my 4 axis cutter.

Bielszowicka 64, Warszawa 04-738 Poland

bCNC has been very useful but I'll probably switch to full custom on PC side.

aes92000 commented 1 year ago

Another note... I use all external motor drivers, not the DRV modules. Will that be an issue? If not, give me a few days to get put together and copy files, because of the holidays. I'll get mailed out and let you know when I do.

Hope it will be very useful. I have been running board for 4+ years now

On Fri, Dec 30, 2022, 09:53 michalelektryk @.***> wrote:

Thanks! I'll be very glad to play with your board and hopefully finish my 4 axis cutter.

Bielszowicka 64, Warszawa 04-738 Poland

bCNC has been very useful but I'll probably switch to full custom on PC side.

— Reply to this email directly, view it on GitHub https://github.com/dguerizec/grbl-Mega-4axis/issues/7#issuecomment-1367982065, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB3TD6HQAPIYHQWZHCDKHDDWP4AQXANCNFSM6AAAAAATM3QJ3I . You are receiving this because you commented.Message ID: @.***>

michalelektryk commented 1 year ago

Can you elaborate a bit on external motor drivers? Does it mean your board has just step/dir outputs routed to external motor controllers?

aes92000 commented 1 year ago

Correct.

On Fri, Dec 30, 2022, 10:09 michalelektryk @.***> wrote:

Can you elaborate a bit on external motor drivers? Does it mean your board has just step/dir outputs routed to external motor controllers?

— Reply to this email directly, view it on GitHub https://github.com/dguerizec/grbl-Mega-4axis/issues/7#issuecomment-1367988545, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB3TD6C7IMVV6FL62Y6SCS3WP4CL3ANCNFSM6AAAAAATM3QJ3I . You are receiving this because you commented.Message ID: @.***>

michalelektryk commented 1 year ago

Then I'm afraid it'll be of little use to me.

If I can ask you used it with external powerful drivers for big steppers / BLDCs or you simply had board with stepstics on it?

aes92000 commented 1 year ago

I did start with the small DRV modules but kept burning up. I am using NEMA23 motors for all 5 axis

I believe I may have an add-on board for the small drivers. Basically wire as Step, Dir and power from mega board to add-on DVR drivers. How many axis are you using?

Let me see what I have and I'll see if you can use it.

I am working now but will be back in a couple hours and I will check if I have what you need.

On Fri, Dec 30, 2022, 10:50 michalelektryk @.***> wrote:

Then I'm afraid it'll be of little use to me.

If I can ask you used it with external powerful drivers for big steppers / BLDCs or you simply had board with stepstics on it?

— Reply to this email directly, view it on GitHub https://github.com/dguerizec/grbl-Mega-4axis/issues/7#issuecomment-1368008280, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB3TD6F4M2DRKQGUDZ4PLJ3WP4HG3ANCNFSM6AAAAAATM3QJ3I . You are receiving this because you commented.Message ID: @.***>

michalelektryk commented 1 year ago

I'm doing 4 axis on 6 motors (2 axis have 2 motors in parallel and that's stretching what's possible on DVRs so anything than can handle a bit more is welcome change).

is any of the 6 relay outputs capable of PWM like standard grbl?

aes92000 commented 1 year ago

No, relays are on/off only

The dual motors can be parallel from wiring off mega also. Each on its own DRV and same signal from mega.

If i have 2 add-on boards with 4 motors per board, that would allow dual motor wiring

On Fri, Dec 30, 2022, 14:10 michalelektryk @.***> wrote:

I'm doing 4 axis on 6 motors (2 axis have 2 motors in parallel and that's stretching what's possible on DVRs so anything than can handle a bit more is welcome change).

is any of the 6 relay outputs capable of PWM like standard grbl?

— Reply to this email directly, view it on GitHub https://github.com/dguerizec/grbl-Mega-4axis/issues/7#issuecomment-1368075997, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB3TD6H2N3URPNEFO2TIJ4DWP46VBANCNFSM6AAAAAATM3QJ3I . You are receiving this because you commented.Message ID: @.***>

michalelektryk commented 1 year ago

That'd be perfect. If not then single add-on board and motor windings in parallel should also be sufficient.

Oakmanor1 commented 1 year ago

just looking at projects

michalelektryk commented 1 year ago

thanks

michalelektryk commented 1 year ago

Were you able to find anything?

aes92000 commented 1 year ago

Yes, I actually made you 2 adaptor boards I'm am in process of soldering the mega shield.

On Mon, Jan 2, 2023, 10:00 michalelektryk @.***> wrote:

Were you able to find anything?

— Reply to this email directly, view it on GitHub https://github.com/dguerizec/grbl-Mega-4axis/issues/7#issuecomment-1369055407, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB3TD6DAIFCMCJFO57R5GATWQL3STANCNFSM6AAAAAATM3QJ3I . You are receiving this because you commented.Message ID: @.***>

aes92000 commented 1 year ago

I will send you papers with wiring diagrams also

On Mon, Jan 2, 2023, 10:08 James 360 @.***> wrote:

Yes, I actually made you 2 adaptor boards I'm am in process of soldering the mega shield.

On Mon, Jan 2, 2023, 10:00 michalelektryk @.***> wrote:

Were you able to find anything?

— Reply to this email directly, view it on GitHub https://github.com/dguerizec/grbl-Mega-4axis/issues/7#issuecomment-1369055407, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB3TD6DAIFCMCJFO57R5GATWQL3STANCNFSM6AAAAAATM3QJ3I . You are receiving this because you commented.Message ID: @.***>

aes92000 commented 1 year ago

I have all the boards ready to ship. It will take me a few days to get mailed because of my work schedule. I will let you know when the ship.

I am also sending a thumb drive that contains the diagrams, pin outs, arduino library and pre-compiled .hex files.

On Mon, Jan 2, 2023 at 10:08 AM James 360 @.***> wrote:

I will send you papers with wiring diagrams also

On Mon, Jan 2, 2023, 10:08 James 360 @.***> wrote:

Yes, I actually made you 2 adaptor boards I'm am in process of soldering the mega shield.

On Mon, Jan 2, 2023, 10:00 michalelektryk @.***> wrote:

Were you able to find anything?

— Reply to this email directly, view it on GitHub https://github.com/dguerizec/grbl-Mega-4axis/issues/7#issuecomment-1369055407, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB3TD6DAIFCMCJFO57R5GATWQL3STANCNFSM6AAAAAATM3QJ3I . You are receiving this because you commented.Message ID: @.***>

michalelektryk commented 1 year ago

Sorry, my github somehow supressed notifications. thank you very much for all your help! I already started reading all docs of GRBL to hopefully be at least close to getting into your code when everything arrives.

michalelektryk commented 1 year ago

Hi, how's shipping going?

aes92000 commented 1 year ago

Wow, I apologize. I have been out of town working. I will be back tomorrow and I will get mailed

On Thu, Jan 26, 2023, 10:41 michalelektryk @.***> wrote:

Hi, how's shipping going?

— Reply to this email directly, view it on GitHub https://github.com/dguerizec/grbl-Mega-4axis/issues/7#issuecomment-1405287255, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB3TD6A54S3FAAXZZ7DUS33WUKSL5ANCNFSM6AAAAAATM3QJ3I . You are receiving this because you commented.Message ID: @.***>

aes92000 commented 1 year ago

Ok, slight setback... I didn't realize the shipping was so darn expensive.

I need to know how you want to proceed.

USPS has NO TRACKING AT ALL

UPS has TRACKING ALL THE WAY

On Thu, Jan 26, 2023, 11:31 James 360 @.***> wrote:

Wow, I apologize. I have been out of town working. I will be back tomorrow and I will get mailed

On Thu, Jan 26, 2023, 10:41 michalelektryk @.***> wrote:

Hi, how's shipping going?

— Reply to this email directly, view it on GitHub https://github.com/dguerizec/grbl-Mega-4axis/issues/7#issuecomment-1405287255, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB3TD6A54S3FAAXZZ7DUS33WUKSL5ANCNFSM6AAAAAATM3QJ3I . You are receiving this because you commented.Message ID: @.***>

michalelektryk commented 1 year ago

I think no tracking. As far as I remember shipping costs UPS may cost few times more than entire controller

aes92000 commented 1 year ago

Boards on the way Estimated 7-21 days

On Fri, Jan 27, 2023, 15:06 michalelektryk @.***> wrote:

I think no tracking. As far as I remember shipping costs UPS may cost few times more than entire controller

— Reply to this email directly, view it on GitHub https://github.com/dguerizec/grbl-Mega-4axis/issues/7#issuecomment-1407074903, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB3TD6FTZL7G6B2SWERXUIDWUQ2GPANCNFSM6AAAAAATM3QJ3I . You are receiving this because you commented.Message ID: @.***>

michalelektryk commented 1 year ago

Thank you very much. I will keep you updated

aes92000 commented 1 year ago

Need anything to help understand or setup, let me know.

When parts arrive, look on USB for diagrams and GRBL setup files.

On Wed, Feb 1, 2023, 16:09 michalelektryk @.***> wrote:

Thank you very much. I will keep you updated

— Reply to this email directly, view it on GitHub https://github.com/dguerizec/grbl-Mega-4axis/issues/7#issuecomment-1412804340, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB3TD6EBMR3KBC3LS54I67DWVLNILANCNFSM6AAAAAATM3QJ3I . You are receiving this because you commented.Message ID: @.***>

aes92000 commented 1 year ago

get delivery yet???

On Wed, Feb 1, 2023 at 5:02 PM James 360 @.***> wrote:

Need anything to help understand or setup, let me know.

When parts arrive, look on USB for diagrams and GRBL setup files.

On Wed, Feb 1, 2023, 16:09 michalelektryk @.***> wrote:

Thank you very much. I will keep you updated

— Reply to this email directly, view it on GitHub https://github.com/dguerizec/grbl-Mega-4axis/issues/7#issuecomment-1412804340, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB3TD6EBMR3KBC3LS54I67DWVLNILANCNFSM6AAAAAATM3QJ3I . You are receiving this because you commented.Message ID: @.***>

michalelektryk commented 1 year ago

No, still fighting with customs. They can't believe I got such "industrial equipment" as a git. But should hopefully be solved within days

aes92000 commented 1 year ago

Wow. I hope it works out soon. Good luck.

On Tue, Feb 21, 2023, 02:54 michalelektryk @.***> wrote:

No, still fighting with customs. They can't believe I got such "industrial equipment" as a git. But should hopefully be solved within days

— Reply to this email directly, view it on GitHub https://github.com/dguerizec/grbl-Mega-4axis/issues/7#issuecomment-1438084107, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB3TD6HAJFTSMWZOES6PMZLWYR7C3ANCNFSM6AAAAAATM3QJ3I . You are receiving this because you commented.Message ID: @.***>

michalelektryk commented 1 year ago

Hi, boards arrived. I hope I'll find some time next week to play with them

aes92000 commented 1 year ago

Just let me know if I can help in any way

On Fri, Feb 24, 2023, 15:05 michalelektryk @.***> wrote:

Hi, boards arrived. I hope I'll find some time next week to play with them

— Reply to this email directly, view it on GitHub https://github.com/dguerizec/grbl-Mega-4axis/issues/7#issuecomment-1444488420, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB3TD6CGTLAIZIDXV4CH4NLWZEPC7ANCNFSM6AAAAAATM3QJ3I . You are receiving this because you commented.Message ID: @.***>