search

dhalperi / linux-80211n-csitool-supplementary

802.11n CSI Tool based on iwlwifi and Linux-2.6
http://dhalperi.github.com/linux-80211n-csitool/
195 stars 129 forks source link

can I use Desktop PC with intel 5300 instead of laptop?? #341

Open lidongning opened 7 years ago

lidongning commented 7 years ago

when I use Desktop PC with intel 5300 and TL_WDR7500, it speed only 6M??

ozawali commented 7 years ago

denpend on what the model AP used, so if you set the 5300 as the client and the TL_WDR as the AP the speed related to the current state. if you want control the rate I suggest you use the injection mode.

ozawali commented 7 years ago

please read the faq carefullyhttps://dhalperi.github.io/linux-80211n-csitool/faq.html

lidongning commented 7 years ago

Tank you very much !

nafiul-nipu commented 7 years ago

hi.. i am trying to set up injection mode.. but when i run the scripts it says permission denied for both transmitter and receiver.. can you suggest me regarding this problem??

ozawali commented 7 years ago

please read the faq carefully, and then you will reach it.

nafiul-nipu commented 7 years ago

@ozawali hello.. i have another problem.. for getting csi data.. in the example it shows that the csi data is a matrix of 1x3x30 but i am getting 2x3x1652 , 2x3x1456 etc. means i am getting a lot of data.can you please tell me how i would get 1x3x30. i am using a desktop and intel 5300 nic inside it and a TPlink router with two antennas.

scivision commented 6 years ago

Link to the FAQ above got mangled:

https://dhalperi.github.io/linux-80211n-csitool/faq.html