Open wbakker opened 6 years ago
I have the exact same iseue
root@ubuntu:~# iw --debug phy phy0 set channel 6
-- Debug: Sent Message:
-------------------------- BEGIN NETLINK MESSAGE ---------------------------
[NETLINK HEADER] 16 octets
.nlmsg_len = 60
.type = 28 <0x1c>
.flags = 5 <REQUEST,ACK>
.seq = 1539528432
.port = 369101486
[GENERIC NETLINK HEADER] 4 octets
.cmd = 2
.version = 0
.unused = 0
[PAYLOAD] 40 octets
08 00 01 00 00 00 00 00 08 00 26 00 85 09 00 00 ..........&.....
08 00 9f 00 00 00 00 00 08 00 27 00 00 00 00 00 ..........'.....
08 00 a0 00 85 09 00 00 ........
--------------------------- END NETLINK MESSAGE ---------------------------
-- Debug: Received Message:
-------------------------- BEGIN NETLINK MESSAGE ---------------------------
[NETLINK HEADER] 16 octets
.nlmsg_len = 80
.type = 2 <ERROR>
.flags = 0 <>
.seq = 1539528432
.port = 369101486
[ERRORMSG] 20 octets
.error = -95 "Operation not supported"
[ORIGINAL MESSAGE] 16 octets
.nlmsg_len = 16
.type = 28 <0x1c>
.flags = 5 <REQUEST,ACK>
.seq = 1539528432
.port = 369101486
--------------------------- END NETLINK MESSAGE ---------------------------
command failed: Operation not supported (-95)
I can put the adapter in monitoring mode. But it is not possible to change the wireless channel. See debug log below.