search

dieideeistgut / 3d-print-monitor-moonraker

MIT License
3 stars 1 forks source link

Moonraker support? #1

Closed TheLion closed 2 years ago

TheLion commented 2 years ago

Hi,

Does this support Moonraker as well? Or only Octoprint?

The title suggests it, but I can't find any documentation on that.

dieideeistgut commented 2 years ago

Worked once with Moonraker. I currently dont use this here anymore and there may have been updates in the Moonraker API which are not reflected here.

TheLion commented 2 years ago

Worked once with Moonraker. I currently dont use this here anymore and there may have been updates in the Moonraker API which are not reflected here.

Oh. Too bad. :-(

dieideeistgut commented 2 years ago

I'll have a look asap and ping you once i checked if everthing remained working ;)

TheLion commented 2 years ago

I'll have a look asap and ping you once i checked if everthing remained working ;)

Great! Thanks. Didn't expect that :pray:

TheLion commented 2 years ago

Hi @dieideeistgut I just tried it with the firmware.bin on your Github. Works great with Moonraker, at least when not printing. ;-)

But when I tried it with a freshly compiled firmware.bin file, because the screen orientation is not correct for my setup, I ran into a couple of issues:

2022-02-03 19-19-00

Can these issues be caused by incorrect libraries? As the libraries you mention, one (ESPAsyncWebServer) does not exist with the exact same name.

I also get some warnings (see attachment) during compile, which may or may not be due to an incorrect library. compile.txt

Hope you can help me to get this right, as I really like this for monitoring my printers from the living-room ;-)

If you need any additional information, feel free to ask!