Closed Alessandro1970 closed 4 years ago
Is there any way to create and mount a HDF file
No, hard disks are not emulated yet. Support shouldn't be added before everything else is stable (which won't happen in the near future I think).
When it will be the moment of hd support ...I have found a 4GB virtual hard drive file for Amiga with 3.1 WB that starts with kick 3.1. For the emulator are needed 68020 CPU emulation and Z2 ram expansion at least 8MB. There are a full games ready in WHDLOAD format, they are preset and run without strange configurations, only main wb configuration as told above, I can play without change RAM or Kick without any problem from Barbarian psignosys, Feud to Faery tale; this virtual HD can boot from Winuae or FSuae - this WHDLOAD system is great:
For the emulator are needed 68020 CPU emulation
Actually, it's unlikely that vAmiga will get 68020 support in the near future. To improve emulation accuracy (which is the main goal at the moment), I need to move away from Musashi towards a custom CPU that is specifically tailored to vAmiga's software architecture. The custom CPU will be limited to the Motorola 68000 at first. Supporting the 68010 should be doable without too much pain, but supporting the 68020 and above will be difficult. From the 68020 on, Motorola implemented some kind of parallel instruction execution which is much more difficult to emulate than the rather primitive pipeline design used by 68000 and 68010.
@Alessandro1970
Can you share a link to the 4GB virtual hard drive file for Amiga with 3.1 WB that starts with kick 3.1 that you found?
Let me know, it will be used for my mist fpga as well. https://workupload.com/ is a good service for large file sharing. No account is needed...
Frank Michielli Sent with iOS Spark!📱 On Apr 20, 2020, 1:23 AM -0400, Alessandro notifications@github.com, wrote:
Hi, I have reduced size of the hd to 2gb, but to be used you need a 68020, fast ram 8mb and kick 3.14 To boot. I use it on Mister hardware. I can try to upload with any filetransfer by mail. But I do not know if it is possible, it is a huge file. — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
You need a 68020, fast ram 8mb, AGA and kick 3.14 ...if Minimig on Mist has those you'll ok.
To use Amigabasic ...switch to 68000 and remove fasr ram (but whdload won't work).
I'm trying to upload on workupload as you told me, I must include your mail ?
I have all the hardware needed. No email address required just the link it creates
Frank Michielli Sent with iOS Spark!📱 On Apr 20, 2020, 8:37 AM -0400, Alessandro notifications@github.com, wrote:
You need a 68020, fast ram 8mb, AGA and kick 3.14 ...if Minimig on Mist has those you'll ok. To use Amigabasic ...switch to 68000 and remove fasr ram (but whdload won't work). I'm trying to upload on workupload as you told me, I must include your mail ? — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
Ok, let me know...
Frank Michielli Sent with iOS Spark!📱 On Apr 20, 2020, 2:51 PM -0400, Alessandro notifications@github.com, wrote:
Ok This is the third time that I try to uploag 2Gb file. Next time I’ll try to split in in 3 part with 7zip (it’s free) — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
Password?
Frank Michielli Sent with iOS Spark!📱 On Apr 20, 2020, 3:59 PM -0400, Alessandro notifications@github.com, wrote:
— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
Try we transfer
Frank Michielli Sent with iOS Spark!📱 On Apr 20, 2020, 4:06 PM -0400, Alessandro notifications@github.com, wrote:
https://workupload.com/ does not work with big files Give me another one or mail for WeTransfer — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
bluecursor@outlook.com
Frank Michielli Sent with iOS Spark!📱 On Apr 20, 2020, 4:09 PM -0400, Alessandro notifications@github.com, wrote:
...your mail... — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
I just setup a webdev @ http://www.finishfirst.ca:8030/ on server if you want to try to upload there ?
Frank Michielli Sent with iOS Spark!📱 On Apr 20, 2020, 4:16 PM -0400, Alessandro notifications@github.com, wrote:
First of 4 is has begun its run... — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
Host is www.finishfirst.ca:8030
And there is no username/password its anonymous
Frank Michielli Sent with iOS Spark!📱 On Apr 20, 2020, 4:48 PM -0400, Alessandro notifications@github.com, wrote:
May I use filezilla to copy files ? I need for filezilla: Host: User: Pass; — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
Try www.finishfirst.ca:2121
No username/password
Frank Michielli Sent with iOS Spark!📱 On Apr 20, 2020, 4:54 PM -0400, Alessandro notifications@github.com, wrote:
Filezilla says: Errore: Timeout connessione dopo 20 secondi di inattività Errore: Impossibile collegarsi al server — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
Stato: In attesa di un nuovo tentativo... Stato: Risoluzione dell'indirizzo IP www.finishfirst.ca in corso Stato: Connessione a 174.95.214.115:2121... Errore: Timeout connessione dopo 20 secondi di inattività Errore: Impossibile collegarsi al server
None
Yes
Frank Michielli Sent with iOS Spark!📱 On Apr 20, 2020, 5:04 PM -0400, Alessandro notifications@github.com, wrote:
Have you received first file ? — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
No missing 004
Frank Michielli Sent with iOS Spark!📱 On Apr 21, 2020, 2:10 AM -0400, Alessandro notifications@github.com, wrote:
All files have been sent. Ok ? — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
Yes. Thank you for everything and your time!
Frank Michielli Sent with iOS Spark!📱 On Apr 21, 2020, 3:11 AM -0400, Alessandro notifications@github.com, wrote:
Done — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
It says it’s not a formatted drive. But works in fsuae. Can you send me the .rbf your using a lot with .cfg
Frank Michielli Sent with iOS Spark!📱 On Apr 21, 2020, 3:11 AM -0400, Alessandro notifications@github.com, wrote:
Done — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
In order to see the files you must use kick 3.14 not else
I am using the kick.rom you sent
Frank Michielli Sent with iOS Spark!📱 On Apr 21, 2020, 3:49 AM -0400, Alessandro notifications@github.com, wrote:
In order to see the files you must use kick 3.14 not else — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
You can download it here: https://github.com/MiSTer-devel/Minimig-AGA_MiSTer
See release folder
Download the latest version. It doesn’t work on my mist. Beta v 1.2.3 works for me but not with your ,hdf
Frank Michielli Sent with iOS Spark!📱 On Apr 21, 2020, 3:53 AM -0400, Alessandro notifications@github.com, wrote:
See release folder — You are receiving this because you commented. Reply to this email directly, view it on GitHub, or unsubscribe.
Is there any way to create and mount a HDF file to install wb 3.1 ?