search

disk91 / WioLoRaWANFieldTester

86 stars 32 forks source link

device field tester with Kerlink Wansey #42

Closed t0mZ4 closed 2 years ago

t0mZ4 commented 2 years ago

Hi there

we'd like to use the field tester with Kerlink WMC and TTI

We have the SEEED bundle.

Can we get the appKey and just add them to our network servers? Or do we need to flash different firmware?

Also, where do we get the appKey per-defined in the seeed bundle?

thanks alot!

disk91 commented 2 years ago

The version 1.9 of the firmware is compatible with TTN. Then you need to configure TTN / TTI like it is described in the github project page. If you have a seeed bundle, preconfigured with Helium credentials, you need to follow the github issue « change config to manage my own console account .. » you will lost the helium credentials forever. Paul

Paul Pinault http://www.disk91.com http://www.twitter.com/disk_91

Le 26 juil. 2022 à 08:53, Tom Z @.***> a écrit :

 Hi there

we'd like to use the field tester with Kerlink WMC and TTI

We have the SEEED bundle.

Can we get the appKey and just add them to our network servers? Or do we need to flash different firmware?

Also, where do we get the appKey per-defined in the seeed bundle?

thanks alot!

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.

disk91 commented 2 years ago

Concerning WMC ( particularly Wanesy Data Plane ), I do not have an instance to make integration test with the backend so I can't do anything until this.

t0mZ4 commented 2 years ago

thanks alot! so I am trying to flash the firm to 1.9 All Zone LoRa E5 Chassis (Seeed)

I see the arduino drive mounting, i drag the file, nothing happens. I am using linux.

anything else should do or try?

disk91 commented 2 years ago

I never try it with Linux. You should try to flush the drive with sync command after your copy.

Paul Pinault http://www.disk91.com http://www.twitter.com/disk_91

Le 3 août 2022 à 10:38, Tom Z @.***> a écrit :

 thanks alot! so I am trying to flash the firm to 1.9 All Zone LoRa E5 Chassis (Seeed)

I see the arduino drive mounting, i drag the file, nothing happens. I am using linux.

anything else should do or try?

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.

t0mZ4 commented 2 years ago

managed to flash it fine from windows laptop, thanks!