Closed dopedvd closed 8 years ago
Hi, Can you provide some information on what the Gimbal beacon is? Is it an iBeacon supported device?
Hi Michael
My test Beacon is https://store.gimbal.com/p-1-gimbal-proximity-beacon-series-10-firmware-v161.aspx Gimbal Proximity Beacon - Series 10 Firmware v1.8.0 and this beacon is support iBeacon
My test Phone is Nexus5 and iPhone6
Thank you.
05_개발본부_김용규
From: Michael [mailto:notifications@github.com] Sent: Friday, December 05, 2014 7:06 AM To: distriqt/airnativeextensions Cc: dopedvd Subject: Re: [airnativeextensions] Beacon Ane doesn't working with Gimbal Beacon Series 10 (#307)
Hi, Can you provide some information on what the Gimbal beacon is? Is it an iBeacon supported device?
— Reply to this email directly or view it on GitHub https://github.com/distriqt/airnativeextensions/issues/307#issuecomment-65712276 .보낸 사람이 제거한 이미지입니다.
Most likely this is a problem with the way you've configured the device. These types of beacons are able to do a lot more than just act as an iBeacon so you must make sure you've loaded and setup the correct firmware to make it act as an iBeacon.
Thank you very much
I’ll try reconfiguration my beacons
Have a nice day~ :-)
05_개발본부_김용규
From: Michael [mailto:notifications@github.com] Sent: Friday, December 05, 2014 11:56 AM To: distriqt/airnativeextensions Cc: dopedvd Subject: [SPAM] Re: [airnativeextensions] Beacon Ane doesn't working with Gimbal Beacon Series 10 (#307)
Most likely this is a problem with the way you've configured the device. These types of beacons are able to do a lot more than just act as an iBeacon so you must make sure you've loaded and setup the correct firmware to make it act as an iBeacon.
— Reply to this email directly or view it on GitHub https://github.com/distriqt/airnativeextensions/issues/307#issuecomment-65740852 .보낸 사람이 제거한 이미지입니다.
I have ploblem with my test Phones, I started test by Nexus5(os : 5.0), it was working very nice, and I tried LG G2, and LG Optimus G by same source code. Publish and Installed in LG phones. and I started my beacon test app, Bluetooth shutdown alert popup again and again. G2 Os version is 4.4.2 and bluetooth version is 4.0. How can I fix it? can you help me? My test beacons is Estimote
I was used “Reco” Beacon.(product of Korea). It works very good.
But my client need to use Gimbal beacon, So I bought Gimbal beacon.
Today I receive Gimbal beacon and try beacon connection test, It doesn’t working
How Can I fix this problem? I need help..