Closed dittodhole closed 6 years ago
The ^B0 command creates a two-dimensional matrix symbology made up of square modules arranged around a bulls-eye pattern at the center.
^B0
The Aztec bar code works with firmware V60.13.0.11A and higher.
^B0a,b,c,d,e,f,g
This table identifies the parameters for this format:
a
N
R
I
B
^FW
b
1
10
2
3
6
c
Y
d
0
01
99
101
104
201
232
300
e
f
126
g
Aztec Bar Code Parameters
Description
The
^B0
command creates a two-dimensional matrix symbology made up of square modules arranged around a bulls-eye pattern at the center.Note
The Aztec bar code works with firmware V60.13.0.11A and higher.
Format
This table identifies the parameters for this format:
a
= orientation
Default Value: currentN
= normalR
= rotatedI
= inverted 180 degreesB
= read from bottom up, 270 degrees^FW
valueb
= magnification factor1
to10
Default Value:
1
on 150 dpi printers2
on 200 dpi printers3
on 300 dpi printers6
on 600 dpi printersc
= extended channel interpretation code indicator
Default Value:Y
= if data contains ECICsN
if data does not contain ECICsN
d
= error control and symbol size/type indicator
Default Value:0
= default error correction level01
to99
= error correction percentage (minimum)101
to104
= 1 to 4-layer compact symbol201
to232
= 1 to 32-layer full-range symbol300
= a simple Aztec "Rune"0
e
= menu symbol indicator
Default Value:Y
= if this symbol is to be menu (bar code reader initialization) symbolN
= if it is not a menu symbolN
f
= number of symbols for structured append1
to126
Default Value:
1
g
= optional ID field for structured appendDefault Value: no ID