divx118 / crouton-packages

Kernel-headers packages to use with crouton
56 stars 16 forks source link

vboxdrv.sh: failed: modprobe vboxdrv failed. #56

Closed sudonotpseudo closed 7 years ago

sudonotpseudo commented 7 years ago

After following the guide, I encounter the following error when running sudo /sbin/vboxconfig

vboxdrv.sh: failed: modprobe vboxdrv failed.

The following is the output from dmesg

[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.11 (chrome-bot@build328-m2) (gcc version 4.9.x 20150123 (prerelease) (4.9.2_cos_gg_4.9.2-r141-fe767fbb6d580458aeea609ac5c82b600acce63d_4.9.2-r141) ) #1 SMP Mon Oct 17 21:49:19 PDT 2016 [ 0.000000] Command line: cros_secure console= loglevel=7 init=/sbin/init cros_secure oops=panic panic=-1 root=/dev/dm-0 rootwait ro dm_verity.error_behavior=3 dm_verity.max_bios=-1 dm_verity.dev_wait=1 dm="1 vroot none ro 1,0 2539520 verity payload=PARTUUID=9236dbff-2e50-4a41-a732-3967cd3ff353/PARTNROFF=1 hashtree=PARTUUID=9236dbff-2e50-4a41-a732-3967cd3ff353/PARTNROFF=1 hashstart=2539520 alg=sha1 root_hexdigest=097a09cb139e8bb5c629a413e308ce055e7e6f01 salt=5f210f4d8786db475bc817b1e91ab542d3472b5daced55d94e00199c2d15fc47" noinitrd vt.global_cursor_default=0 kern_guid=9236dbff-2e50-4a41-a732-3967cd3ff353 add_efi_memmap boot=local noresume noswap i915.modeset=1 tpm_tis.force=1 tpm_tis.interrupts=0 nmi_watchdog=panic,lapic iTCO_vendor_support.vendorsupport=3 lsm.module_locking=0 disablevmx=off [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16 [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000002ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000030000-0x000000000003ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000000efffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000f00000-0x0000000000ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000001000000-0x000000007f779fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f77a000-0x000000007f7fffff] type 16 [ 0.000000] BIOS-e820: [mem 0x000000007f800000-0x00000000821fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017cdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Acer Peppy, BIOS Google_Peppy.4389.93.0 01/16/2015 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x17ce00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-back [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask 7F80000000 write-back [ 0.000000] 1 base 00D0000000 mask 7FF0000000 write-combining [ 0.000000] 2 base 00FF800000 mask 7FFF800000 uncachable [ 0.000000] 3 base 0100000000 mask 7F00000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0x7f77a max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped: [mem 0x00000000-0x3fffffff] [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x7f779fff] [ 0.000000] [mem 0x00000000-0x3fffffff] page 1G [ 0.000000] [mem 0x40000000-0x7f5fffff] page 2M [ 0.000000] [mem 0x7f600000-0x7f779fff] page 4k [ 0.000000] kernel direct mapping tables up to 0x7f779fff @ [mem 0x3fffd000-0x3fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17cdfffff] [ 0.000000] [mem 0x100000000-0x13fffffff] page 1G [ 0.000000] [mem 0x140000000-0x17cdfffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x17cdfffff @ [mem 0x7f778000-0x7f779fff] [ 0.000000] ACPI: RSDP 00000000000f0000 00024 (v02 CORE ) [ 0.000000] ACPI: XSDT 000000007f7840e0 00054 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: FACP 000000007f788690 000F4 (v03 CORE COREBOOT 00000000 CORE 00000001) [ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20121018/tbfadt-201) [ 0.000000] ACPI BIOS Bug: Warning: 32/64X length mismatch in FADT/Gpe0Block: 256/255 (20121018/tbfadt-567) [ 0.000000] ACPI: DSDT 000000007f784250 04431 (v02 COREv4 COREBOOT 20110725 INTL 20090123) [ 0.000000] ACPI: FACS 000000007f784210 00040 [ 0.000000] ACPI: HPET 000000007f788790 00038 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: APIC 000000007f7887d0 0006C (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: MCFG 000000007f788840 0003C (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: SSDT 000000007f789740 0122C (v02 CORE COREBOOT 0000002A CORE 0000002A) [ 0.000000] ACPI: SSDT 000000007f78a970 0005C (v02 CORE COREBOOT 0000002A CORE 0000002A) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0005ffffff] PMD -> [ffff880178400000-ffff88017c3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x17cdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0002ffff] [ 0.000000] node 0: [mem 0x00040000-0x0009ffff] [ 0.000000] node 0: [mem 0x00100000-0x00efffff] [ 0.000000] node 0: [mem 0x01000000-0x7f779fff] [ 0.000000] node 0: [mem 0x100000000-0x17cdfffff] [ 0.000000] On node 0 totalpages: 1033210 [ 0.000000] DMA zone: 58 pages used for memmap [ 0.000000] DMA zone: 7 pages reserved [ 0.000000] DMA zone: 3647 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8094 pages used for memmap [ 0.000000] DMA32 zone: 509916 pages, LIFO batch:31 [ 0.000000] Normal zone: 7992 pages used for memmap [ 0.000000] Normal zone: 503496 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 56 [ 0.000000] e820: [mem 0x82200000-0xefffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88017ca00000 s76224 r8192 d22080 u524288 [ 0.000000] pcpu-alloc: s76224 r8192 d22080 u524288 alloc=1_2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1017059 [ 0.000000] Kernel command line: cros_secure console= loglevel=7 init=/sbin/init cros_secure oops=panic panic=-1 root=/dev/dm-0 rootwait ro dm_verity.error_behavior=3 dm_verity.max_bios=-1 dm_verity.dev_wait=1 dm="1 vroot none ro 1,0 2539520 verity payload=PARTUUID=9236dbff-2e50-4a41-a732-3967cd3ff353/PARTNROFF=1 hashtree=PARTUUID=9236dbff-2e50-4a41-a732-3967cd3ff353/PARTNROFF=1 hashstart=2539520 alg=sha1 root_hexdigest=097a09cb139e8bb5c629a413e308ce055e7e6f01 salt=5f210f4d8786db475bc817b1e91ab542d3472b5daced55d94e00199c2d15fc47" noinitrd vt.global_cursor_default=0 kern_guid=9236dbff-2e50-4a41-a732-3967cd3ff353 add_efi_memmap boot=local noresume noswap i915.modeset=1 tpm_tis.force=1 tpm_tis.interrupts=0 nmi_watchdog=panic,lapic iTCO_vendor_support.vendorsupport=3 lsm.module_locking=0 disablevmx=off [ 0.000000] device-mapper: init: will configure 1 devices [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Enabling VMX on cpu 0 [ 0.000000] wrmsrl_safe (MSR_IA32_FEATURE_CONTROL, 00000007) failed error -5 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 3983876k/6240256k available (4921k kernel code, 2107416k absent, 148964k reserved, 4034k data, 708k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] NR_IRQS:4352 nr_irqs:984 16 [ 0.000000] hpet clockevent registered [ 0.000000] Initial TSC value: 5421265139 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] Initial usec timer 3198386 [ 0.001000] tsc: Detected 1695.973 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3391.94 BogoMIPS (lpj=1695973) [ 0.000006] pid_max: default: 32768 minimum: 301 [ 0.000033] Security Framework initialized [ 0.000035] Yama: becoming mindful. [ 0.000048] Mount-cache hash table entries: 256 [ 0.000235] Initializing cgroup subsys freezer [ 0.000257] CPU: Physical Processor ID: 0 [ 0.000258] CPU: Processor Core ID: 0 [ 0.001454] mce: CPU supports 7 MCE banks [ 0.001468] CPU0: Thermal monitoring enabled (TM1) [ 0.001479] process: using mwait in idle threads [ 0.001483] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.001483] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0 [ 0.001483] tlb_flushall_shift: 6 [ 0.001621] Freeing SMP alternatives: 12k freed [ 0.001625] ACPI: Core revision 20121018 [ 0.004177] acpi_enable! [ 0.007584] ACPI mode enable smi_command = 0xb2 val = 0xe1 [ 0.007588] ftrace: allocating 22190 entries in 87 pages [ 0.018895] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.028886] smpboot: CPU0: Intel(R) Core(TM) i3-4005U CPU @ 1.70GHz (fam: 06, model: 45, stepping: 01) [ 0.028894] TSC deadline timer enabled [ 0.028898] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver. [ 0.028907] ... version: 3 [ 0.028908] ... bit width: 48 [ 0.028910] ... generic registers: 4 [ 0.028911] ... value mask: 0000ffffffffffff [ 0.028913] ... max period: 0000ffffffffffff [ 0.028914] ... fixed-purpose events: 3 [ 0.028915] ... event mask: 000000070000000f [ 0.040375] Enabling VMX on cpu 1 [ 0.040381] wrmsrl_safe (MSR_IA32_FEATURE_CONTROL, 00000007) failed error -5 [ 0.044441] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.054976] Enabling VMX on cpu 2 [ 0.054980] wrmsrl_safe (MSR_IA32_FEATURE_CONTROL, 00000007) failed error -5 [ 0.029881] smpboot: Booting Node 0, Processors #1 #2 #3 OK [ 0.069462] Enabling VMX on cpu 3 [ 0.069466] wrmsrl_safe (MSR_IA32_FEATURE_CONTROL, 00000007) failed error -5 [ 0.073421] Brought up 4 CPUs [ 0.073425] smpboot: Total of 4 processors activated (13567.78 BogoMIPS) [ 0.077551] devtmpfs: initialized [ 0.079240] RTC time: 0:09:55, date: 10/26/16 [ 0.079284] NET: Registered protocol family 16 [ 0.080021] Switched to clocksource hpet [ 0.080025] ACPI: bus type pci registered [ 0.080063] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff](base 0xf0000000) [ 0.080066] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.083798] PCI: Using configuration type 1 for base access [ 0.085267] bio: create slab at 0 [ 0.085337] ACPI: Added _OSI(Module Device) [ 0.085339] ACPI: Added _OSI(Processor Device) [ 0.085341] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.085343] ACPI: Added _OSI(Processor Aggregator Device) [ 0.086360] ACPI: EC: Look up EC in DSDT [ 0.093173] ACPI: Interpreter enabled [ 0.093178] ACPI: (supports S0 S3 S5) [ 0.093193] ACPI: Using IOAPIC for interrupt routing [ 0.100810] gpiochip_find_base: found new base at 162 [ 0.100827] gpiochip_add: registered GPIOs 162 to 255 on device: INT33C7:00 [ 0.100913] ACPI: Power Resource TNP0 [ 0.100945] ACPI: Power Resource TNP1 [ 0.101250] ACPI: EC: GPE = 0x24, I/O: command/status = 0x66, data = 0x62 [ 0.101370] ACPI: No dock devices found. [ 0.101373] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.101437] ACPI: PCI Root Bridge [PCI0](domain 0000 [bus 00-ff]) [ 0.101440] ACPI: PCI Interrupt Routing Table [SB.PCI0._PRT] [ 0.101645] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff](conflicts with Video ROM [mem 0x000c0000-0x000cebff]) [ 0.101651] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.101676] PCI host bridge to bus 0000:00 [ 0.101679] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.101682] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.101684] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.101686] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.101689] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] [ 0.101691] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] [ 0.101693] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] [ 0.101695] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.101697] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.101700] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.101702] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.101704] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.101706] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.101708] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] [ 0.101711] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] [ 0.101713] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff] [ 0.101715] pci_bus 0000:00: root bus resource [mem 0x82200001-0xfebfffff] [ 0.101717] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.101728] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.101774] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 0.101788] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe03fffff 64bit] [ 0.101797] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.101803] pci 0000:00:02.0: reg 20: [io 0x1800-0x183f] [ 0.101843] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.101853] pci 0000:00:03.0: reg 10: [mem 0xe0510000-0xe0513fff 64bit] [ 0.101920] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.101940] pci 0000:00:14.0: reg 10: [mem 0xe0500000-0xe050ffff 64bit] [ 0.102012] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.102033] pci 0000:00:15.0: [8086:9c60] type 00 class 0x080102 [ 0.102051] pci 0000:00:15.0: reg 10: [mem 0xe0518000-0xe0518fff] [ 0.102062] pci 0000:00:15.0: reg 14: [mem 0xe0519000-0xe0519fff] [ 0.102147] pci 0000:00:15.1: [8086:9c61] type 00 class 0x0c8000 [ 0.102165] pci 0000:00:15.1: reg 10: [mem 0xe051a000-0xe051afff] [ 0.102176] pci 0000:00:15.1: reg 14: [mem 0xe051b000-0xe051bfff] [ 0.102261] pci 0000:00:15.2: [8086:9c62] type 00 class 0x0c8000 [ 0.102279] pci 0000:00:15.2: reg 10: [mem 0xe051c000-0xe051cfff] [ 0.102290] pci 0000:00:15.2: reg 14: [mem 0xe051d000-0xe051dfff] [ 0.102385] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.102400] pci 0000:00:1b.0: reg 10: [mem 0xe0514000-0xe0517fff 64bit] [ 0.102468] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.102487] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400 [ 0.102555] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.102587] pci 0000:00:1f.0: [8086:9c45] type 00 class 0x060100 [ 0.102723] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.102739] pci 0000:00:1f.2: reg 10: [io 0x1860-0x1867] [ 0.102747] pci 0000:00:1f.2: reg 14: [io 0x1870-0x1873] [ 0.102755] pci 0000:00:1f.2: reg 18: [io 0x1868-0x186f] [ 0.102764] pci 0000:00:1f.2: reg 1c: [io 0x1874-0x1877] [ 0.102772] pci 0000:00:1f.2: reg 20: [io 0x1840-0x185f] [ 0.102780] pci 0000:00:1f.2: reg 24: [mem 0xe051f000-0xe051f7ff] [ 0.102819] pci 0000:00:1f.2: PME# supported from D3hot [ 0.102834] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.102849] pci 0000:00:1f.3: reg 10: [mem 0xe051fc00-0xe051fcff 64bit] [ 0.102871] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.102912] pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000 [ 0.102944] pci 0000:00:1f.6: reg 10: [mem 0xe051e000-0xe051efff 64bit] [ 0.103122] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000 [ 0.103146] pci 0000:01:00.0: reg 10: [mem 0xe0400000-0xe047ffff 64bit] [ 0.103202] pci 0000:01:00.0: reg 30: [mem 0xe0480000-0xe048ffff pref] [ 0.103258] pci 0000:01:00.0: supports D1 D2 [ 0.103260] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.105020] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.105026] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff] [ 0.105037] pci_bus 0000:00: on NUMA node 0 [ 0.105055] ACPI: PCI Interrupt Routing Table [SB.PCI0.RP01._PRT] [ 0.105291] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.105314] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.105907] ACPI: PCI Interrupt Link [LNKA](IRQs 1 3 4 5 6 7 10 12 14 15) 11, disabled. [ 0.105948] ACPI: PCI Interrupt Link [LNKB](IRQs 1 3 4 5 6 7 11 12 14 15) 10, disabled. [ 0.105994] ACPI: PCI Interrupt Link [LNKC](IRQs 1 3 4 5 6 7 10 12 14 15) 11, disabled. [ 0.106037] ACPI: PCI Interrupt Link [LNKD](IRQs 1 3 4 5 6 7 11 12 14 15), disabled. [ 0.106073] ACPI: PCI Interrupt Link [LNKE](IRQs 1 3 4 5 6 7 10 12 14 15) 0, disabled. [ 0.106110] ACPI: PCI Interrupt Link [LNKF](IRQs 1 3 4 5 6 7 11 12 14 15) 0, disabled. [ 0.106146] ACPI: PCI Interrupt Link [LNKG](IRQs 1 3 4 5 6 7 10 12 14 15) 0, disabled. [ 0.106182] ACPI: PCI Interrupt Link [LNKH](IRQs 1 3 4 5 6 7 11 12 14 15) 0, disabled. [ 0.106286] SCSI subsystem initialized [ 0.106289] ACPI: bus type scsi registered [ 0.106331] libata version 3.00 loaded. [ 0.106349] ACPI: bus type usb registered [ 0.106368] usbcore: registered new interface driver usbfs [ 0.106377] usbcore: registered new interface driver hub [ 0.106404] usbcore: registered new device driver usb [ 0.106421] Linux video capture interface: v2.00 [ 0.106438] chromeos: tpm attack callbacks: -19 [ 0.106500] chromeos_acpi: registering CHSW 0 [ 0.106629] chromeos_acpi: registering VBNV 0 [ 0.106632] chromeos_acpi: registering VBNV 1 [ 0.106874] chromeos_acpi: truncating buffer from 3072 to 1336 [ 0.107084] chromeos_acpi: installed [ 0.107086] chromeos_acpi: chromeos_acpi: enabling S3 USB wake [ 0.107106] Advanced Linux Sound Architecture Driver Initialized. [ 0.107107] PCI: Using ACPI for IRQ routing [ 0.108613] PCI: pci_cache_line_size set to 64 bytes [ 0.108665] e820: reserve RAM buffer [mem 0x7f77a000-0x7fffffff] [ 0.108667] e820: reserve RAM buffer [mem 0x17ce00000-0x17fffffff] [ 0.109111] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.109119] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.116970] pnp: PnP ACPI init [ 0.116989] ACPI: bus type pnp registered [ 0.117049] pnp 00:00: Plug and Play ACPI device, IDs PNP0c0e (active) [ 0.117081] pnp 00:01: Plug and Play ACPI device, IDs PNP0c0e (active) [ 0.117140] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.117143] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.117145] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.117148] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.117150] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.117153] system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.117155] system 00:02: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.117158] system 00:02: [mem 0xfed45000-0xfed8ffff] could not be reserved [ 0.117161] system 00:02: [mem 0x00f00000-0x00ffffff] has been reserved [ 0.117164] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.117335] pnp 00:03: [dma 4] [ 0.117359] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.117385] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active) [ 0.117473] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.117476] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.117511] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.117570] system 00:07: [io 0x1000-0x10fe] has been reserved [ 0.117573] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.117599] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.117640] system 00:09: [io 0x0900-0x09fe] has been reserved [ 0.117643] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.117682] system 00:0a: [io 0x0200] has been reserved [ 0.117684] system 00:0a: [io 0x0204] has been reserved [ 0.117687] system 00:0a: [io 0x0800-0x087f] has been reserved [ 0.117689] system 00:0a: [io 0x0880-0x08ff] has been reserved [ 0.117692] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.117727] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.117764] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.117811] pnp 00:0d: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.117902] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.118023] pnp: PnP ACPI: found 15 devices [ 0.118025] ACPI: ACPI bus type pnp unregistered [ 0.122843] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.122848] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 0.122853] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.122856] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.122863] pci 0000:00:1c.0: BAR 9: assigned [mem 0x82300000-0x824fffff 64bit pref] [ 0.122867] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] [ 0.122870] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.122874] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.122879] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff] [ 0.122884] pci 0000:00:1c.0: bridge window [mem 0x82300000-0x824fffff 64bit pref] [ 0.122893] pci 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.122904] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.122906] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.122909] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.122911] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.122913] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.122915] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.122918] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.122920] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.122922] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.122924] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] [ 0.122927] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.122929] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.122931] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.122933] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff] [ 0.122935] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff] [ 0.122938] pci_bus 0000:00: resource 19 [mem 0x82200001-0xfebfffff] [ 0.122940] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff] [ 0.122942] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.122945] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff] [ 0.122947] pci_bus 0000:01: resource 2 [mem 0x82300000-0x824fffff 64bit pref] [ 0.122983] NET: Registered protocol family 2 [ 0.123116] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.123200] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes) [ 0.123536] TCP: Hash tables configured (established 32768 bind 32768) [ 0.123554] TCP: reno registered [ 0.123560] UDP hash table entries: 2048 (order: 5, 196608 bytes) [ 0.123623] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes) [ 0.123724] NET: Registered protocol family 1 [ 0.123736] pci 0000:00:02.0: Boot video device [ 0.123803] PCI: CLS 64 bytes, default 64 [ 0.123843] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.123846] software IO TLB mem 0x7b778000-0x7f778000 mapped at [ffff88007b778000-ffff88007f777fff] [ 0.124340] resource map sanity check conflict: 0xfed10000 0xfed15fff 0xfed10000 0xfed13fff pnp 00:02 [ 0.124342] ------------[ cut here ]------------ [ 0.124348] WARNING: at /mnt/host/source/src/third_party/kernel/v3.8/arch/x86/mm/ioremap.c:171 ioremap_caller+0x2cf/0x314() [ 0.124349] Hardware name: Peppy [ 0.124351] Info: mapping multiple BARs. Your kernel is fine. [ 0.124352] Modules linked in: [ 0.124356] Pid: 1, comm: swapper/0 Not tainted 3.8.11 #1 [ 0.124358] Call Trace: [ 0.124364] [] warn_slowpath_fmt+0x65/0x90 [ 0.124367] [] ioremap_caller+0x2cf/0x314 [ 0.124371] [] ioremap_nocache+0x17/0x19 [ 0.124375] [] snb_uncore_imc_init_box+0x7c/0xb1 [ 0.124378] [] uncore_box_init+0x2c/0x2e [ 0.124381] [] uncore_pci_probe+0x100/0x156 [ 0.124386] [] pci_device_probe+0x6e/0xb0 [ 0.124391] [] driver_probe_device+0xa2/0x1e3 [ 0.124394] [] driver_attach+0x5d/0x7f [ 0.124398] [] ? device_attach+0x3d/0x3d [ 0.124401] [] bus_for_each_dev+0x89/0xac [ 0.124404] [] driver_attach+0x1e/0x20 [ 0.124408] [] bus_add_driver+0x114/0x211 [ 0.124412] [] ? uncore_cpu_setup+0x13/0x13 [ 0.124415] [] driver_register+0x8c/0xfb [ 0.124418] [] ? uncore_cpu_setup+0x13/0x13 [ 0.124422] [] pci_register_driver+0x60/0x63 [ 0.124425] [] intel_uncore_init+0xbf/0x305 [ 0.124428] [] ? uncore_cpu_setup+0x13/0x13 [ 0.124431] [] do_one_initcall+0x7f/0x137 [ 0.124435] [] kernel_init_freeable+0x112/0x190 [ 0.124439] [] ? rest_init+0x6f/0x6f [ 0.124443] [] kernel_init+0xe/0xd6 [ 0.124446] [] ret_from_fork+0x7c/0xb0 [ 0.124449] [] ? rest_init+0x6f/0x6f [ 0.124454] ---[ end trace d5632fdbabf4fc51 ]--- [ 0.124727] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17 [ 0.124735] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17 [ 0.124744] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17 [ 0.124753] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17 [ 0.124780] microcode: Microcode Update Driver: v2.00 tigran@aivazian.fsnet.co.uk, Peter Oruba [ 0.126772] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.126856] msgmni has been set to 7781 [ 0.127179] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.127182] io scheduler noop registered [ 0.127184] io scheduler deadline registered [ 0.127208] io scheduler cfq registered (default) [ 0.127297] pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X [ 0.127391] aer 0000:00:1c.0:pcie02: service driver aer loaded [ 0.127405] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.127407] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.127411] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.127424] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.127441] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.127520] ACPI: AC Adapter AC [ 0.127604] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.127627] ACPI: Lid Switch [LID0] [ 0.127665] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.127667] ACPI: Power Button [PWRB] [ 0.127702] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.127704] ACPI: Sleep Button [TPAD] [ 0.127737] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:01/input/input3 [ 0.127739] ACPI: Sleep Button [TSCR] [ 0.127783] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 0.127785] ACPI: Power Button [PWRF] [ 0.127841] ACPI: Fan TDP0 [ 0.127868] ACPI: Fan TDP1 [ 0.128124] ACPI: Video Device [GFX0](multi-head: yes rom: no post: no) [ 0.128162] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 0.128189] ACPI: Requesting acpi_cpufreq [ 0.128350] Monitor-Mwait will be used to enter C-1 state [ 0.128355] Monitor-Mwait will be used to enter C-2 state [ 0.128359] Monitor-Mwait will be used to enter C-3 state [ 0.128367] ACPI: acpi_idle registered with cpuidle [ 0.131864] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.131867] ACPI: Thermal Zone [THRM](48 C) [ 0.132261] Non-volatile memory driver v1.3 [ 0.132316] Linux agpgart interface v0.103 [ 0.132401] tpm_tis tpm_tis: registering reboot notifier [gentle shutdown] [ 0.132406] ACPI: Battery Slot [BAT0](battery present) [ 0.132424] tpm_tis tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16) [ 0.162016] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 0.197965] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 0.227891] tpm_tis tpm_tis: command 0x53 (size 10) returned code 0x0 [ 0.257897] tpm_tis tpm_tis: command 0x15 (size 14) returned code 0x0 [ 0.257917] [drm] Initialized drm 1.1.0 20060810 [ 0.258407] [drm] Memory usable by graphics device = 2048M [ 0.258413] i915 0000:00:02.0: setting latency timer to 64 [ 0.277695] [drm:i915write32] *ERROR Unknown unclaimed register before writing to a090 [ 0.277813] i915 0000:00:02.0: irq 57 for MSI/MSI-X [ 0.277822] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.277824] [drm] Driver supports precise vblank timestamp query. [ 0.346498] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 0.346502] i915 0000:00:02.0: registered panic notifier [ 0.346516] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 0.346660] [drm] Initialized vgem 1.0.0 20120112 on minor 1 [ 0.346672] usbcore: registered new interface driver udl [ 0.347313] loop: module loaded [ 0.347318] lkdtm: No crash points registered, enable through debugfs [ 0.347357] cros_ec_lpc cros_ec_lpc.0: Chrome EC device registered [ 0.349485] ahci 0000:00:1f.2: version 3.0 [ 0.349530] ahci 0000:00:1f.2: irq 58 for MSI/MSI-X [ 0.349550] ahci: SSS flag set, parallel bus scan disabled [ 0.359706] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode [ 0.359710] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo only pio slum part deso sadm sds apst [ 0.359714] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.359906] scsi0 : ahci [ 0.359972] scsi1 : ahci [ 0.360008] ata1: SATA max UDMA/133 abar m2048@0xe051f000 port 0xe051f100 irq 58 [ 0.360010] ata2: DUMMY [ 0.360120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.360122] ehci-pci: EHCI PCI platform driver [ 0.360132] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.360141] uhci_hcd: USB Universal Host Controller Interface driver [ 0.360179] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 0.360182] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.360224] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.360304] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.360340] xhci_hcd 0000:00:14.0: irq 59 for MSI/MSI-X [ 0.360384] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.360387] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.360389] usb usb1: Product: xHCI Host Controller [ 0.360391] usb usb1: Manufacturer: Linux 3.8.11 xhci_hcd [ 0.360393] usb usb1: SerialNumber: 0000:00:14.0 [ 0.360483] xHCI xhci_add_endpoint called for root hub [ 0.360485] xHCI xhci_check_bandwidth called for root hub [ 0.360511] hub 1-0:1.0: USB hub found [ 0.360520] hub 1-0:1.0: 8 ports detected [ 0.360703] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.360742] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.360763] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.360766] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.360768] usb usb2: Product: xHCI Host Controller [ 0.360770] usb usb2: Manufacturer: Linux 3.8.11 xhci_hcd [ 0.360772] usb usb2: SerialNumber: 0000:00:14.0 [ 0.360842] xHCI xhci_add_endpoint called for root hub [ 0.360844] xHCI xhci_check_bandwidth called for root hub [ 0.360865] hub 2-0:1.0: USB hub found [ 0.360871] hub 2-0:1.0: 4 ports detected [ 0.367710] usbcore: registered new interface driver cdc_acm [ 0.367712] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.367714] Initializing USB Mass Storage driver... [ 0.367733] usbcore: registered new interface driver usb-storage [ 0.367734] USB Mass Storage support registered. [ 0.367744] usbcore: registered new interface driver ums-realtek [ 0.367765] usbcore: registered new interface driver usbserial [ 0.367773] usbcore: registered new interface driver usbserial_generic [ 0.367779] usbserial: USB Serial support registered for generic [ 0.367824] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.367826] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.369079] i8042: Warning: Keylock active [ 0.369215] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.369534] rtc_cmos 00:08: RTC can wake from S4 [ 0.369672] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.369702] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.369742] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 0.369915] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 0.369930] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1060) [ 0.370004] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 0.370101] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com [ 0.370149] device-mapper: verity-chromeos: dm-verity-chromeos registered [ 0.370152] device-mapper: bootcache: version 0.1.0 loaded [ 0.370247] cpuidle: using governor ladder [ 0.370341] cpuidle: using governor menu [ 0.370536] gsmi version 1.0 loaded [ 0.370609] usbcore: registered new interface driver usbhid [ 0.370611] usbhid: USB HID core driver [ 0.371929] add_probed_i2c_device failed to register device 10-4a [ 0.372590] add_probed_i2c_device failed to register device 10-44 [ 0.372861] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 [ 0.373301] platform chromeos_laptop: Driver chromeos_laptop requests probe deferral [ 0.376207] console [pstore-1] enabled [ 0.376214] ramoops: attached 0x100000@0xf00000, ecc: 0 [ 0.376274] Netfilter messages via NETLINK v0.30. [ 0.376293] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 0.376381] ctnetlink v0.93: registering with nfnetlink. [ 0.376509] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.376536] TCP: cubic registered [ 0.376542] Initializing XFRM netlink socket [ 0.376671] NET: Registered protocol family 10 [ 0.376833] NET: Registered protocol family 17 [ 0.379004] __add_probed_i2c_device failed to register device 10-4a [ 0.379611] add_probed_i2c_device failed to register device 10-44 [ 0.379624] platform chromeos_laptop: Driver chromeos_laptop requests probe deferral [ 0.379661] Magic number: 4:591:153 [ 0.379700] acpi device:20: hash matches [ 0.380156] ALSA device list: [ 0.380163] No soundcards found. [ 0.380180] Warning: unable to open an initial console. [ 0.476971] input: Cypress APA Trackpad (cyapa) as /devices/pci0000:00/0000:00:15.1/i2c-9/9-0067/input/input7 [ 0.624477] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.624765] ata1.00: ATA-10: SB M2 SSD, S9FM02.6, max UDMA/133 [ 0.624785] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.625100] ata1.00: configured for UDMA/133 [ 0.625474] scsi 0:0:0:0: Direct-Access ATA SB M2 SSD S9FM PQ: 0 ANSI: 5 [ 0.625758] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 0.625994] sd 0:0:0:0: [sda] Write Protect is off [ 0.626010] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.626072] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.626422] add_probed_i2c_device failed to register device 10-4a [ 0.626523] __add_probed_i2c_device failed to register device 10-44 [ 0.626548] platform chromeos_laptop: Driver chromeos_laptop requests probe deferral [ 0.627879] sda: sda1 sda2 sda3 sda4 sda5 sda8 sda12 [ 0.629007] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.629034] device-mapper: init: attempting early device configuration. [ 0.629305] device-mapper: init: adding target '0 2539520 verity payload=PARTUUID=9236dbff-2e50-4a41-a732-3967cd3ff353/PARTNROFF=1 hashtree=PARTUUID=9236dbff-2e50-4a41-a732-3967cd3ff353/PARTNROFF=1 hashstart=2539520 alg=sha1 root_hexdigest=097a09cb139e8bb5c629a413e308ce055e7e6f01 salt=5f210f4d8786db475bc817b1e91ab542d3472b5daced55d94e00199c2d15fc47' [ 0.629384] device-mapper: verity: Argument 0: 'payload=PARTUUID=9236dbff-2e50-4a41-a732-3967cd3ff353/PARTNROFF=1' [ 0.629404] device-mapper: verity: Argument 1: 'hashtree=PARTUUID=9236dbff-2e50-4a41-a732-3967cd3ff353/PARTNROFF=1' [ 0.629423] device-mapper: verity: Argument 2: 'hashstart=2539520' [ 0.629437] device-mapper: verity: Argument 3: 'alg=sha1' [ 0.629450] device-mapper: verity: Argument 4: 'root_hexdigest=097a09cb139e8bb5c629a413e308ce055e7e6f01' [ 0.629468] device-mapper: verity: Argument 5: 'salt=5f210f4d8786db475bc817b1e91ab542d3472b5daced55d94e00199c2d15fc47' [ 0.631929] bio: create slab at 1 [ 0.631977] device-mapper: init: dm-0 is ready [ 0.633489] EXT4-fs (dm-0): couldn't mount as ext3 due to feature incompatibilities [ 0.633854] EXT4-fs (dm-0): mounting ext2 file system using the ext4 subsystem [ 0.635759] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null) [ 0.635794] VFS: Mounted root (ext2 filesystem) readonly on device 254:0. [ 0.637459] devtmpfs: mounted [ 0.641155] Freeing unused kernel memory: 708k freed [ 0.641343] Write protecting the kernel read-only data: 8192k [ 0.651022] Freeing unused kernel memory: 1212k freed [ 0.651860] Freeing unused kernel memory: 104k freed [ 0.712256] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 0.791040] usb 1-3: New USB device found, idVendor=1bcf, idProduct=2c67 [ 0.791061] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 0.791077] usb 1-3: Product: HD WebCam [ 0.791088] usb 1-3: Manufacturer: SunplusIT Inc [ 0.837965] Chromium OS LSM: init_module locked module="/lib/modules/3.8.11/kernel/drivers/net/tun.ko" pid=83 cmdline="modprobe tun" [ 0.837992] Chromium OS LSM: dev(254,0): read-only [ 0.838002] Chromium OS LSM: module locking engaged. [ 0.838773] tun: Universal TUN/TAP device driver, 1.6 [ 0.838787] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com [ 0.842327] PPP generic driver version 2.4.2 [ 0.861294] add_probed_i2c_device failed to register device 10-4a [ 0.861411] add_probed_i2c_device failed to register device 10-44 [ 0.861452] platform chromeos_laptop: Driver chromeos_laptop requests probe deferral [ 0.867021] systemd-udevd[89]: starting version 208 [ 0.886498] Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required. [ 0.915363] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: commit=600 [ 0.917396] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 0.994130] /dev/pts/0 [ 1.013021] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 1.015011] usb 1-4: new full-speed USB device number 3 using xhci_hcd [ 1.027540] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 [ 1.029511] usb 1-4: New USB device found, idVendor=0489, idProduct=e056 [ 1.029531] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.031120] add_probed_i2c_device failed to register device 10-4a [ 1.031139] chromeos_laptop_probe: Ran out of tries for device. [ 1.031244] __add_probed_i2c_device failed to register device 10-44 [ 1.031260] chromeos_laptop_probe: Ran out of tries for device. [ 1.049069] tpm_tis tpm_tis: command 0xcf (size 22) returned code 0x0 [ 1.049770] Bluetooth: Core ver 2.21 [ 1.049838] NET: Registered protocol family 31 [ 1.049857] Bluetooth: HCI device and connection manager initialized [ 1.049884] Bluetooth: HCI socket layer initialized [ 1.049902] Bluetooth: L2CAP socket layer initialized [ 1.049936] Bluetooth: SCO socket layer initialized [ 1.055805] usbcore: registered new interface driver btusb [ 1.085942] frecon(229): Frecon using drm driver i915, version 1.6, date(20080730), desc(Intel Graphics) [ 1.086099] DEBUG: tsm_screen: new screen [ 1.086133] DEBUG: tsm_vte: new vte object [ 1.112215] usbcore: registered new interface driver ath3k [ 1.112566] usb 1-4: USB disconnect, device number 3 [ 1.116851] bio: create slab at 2 [ 1.130731] tsc: Refined TSC clocksource calibration: 1696.073 MHz [ 1.130762] Switched to clocksource tsc [ 1.133184] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: discard,commit=600 [ 1.178834] EXT4-fs (sda1): re-mounted. Opts: commit=600,data=ordered [ 1.220414] cfg80211: Calling CRDA to update world regulatory domain [ 1.261797] cfg80211: World regulatory domain updated: [ 1.261811] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1.261824] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1.261836] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1.261848] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 1.261860] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 1.261872] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 1.261883] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 1.261894] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 1.261906] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 1.264786] ath: phy0: ASPM enabled: 0x43 [ 1.264798] ath: EEPROM regdomain: 0x6c [ 1.264800] ath: EEPROM indicates we should expect a direct regpair map [ 1.264804] ath: Country alpha2 being used: 00 [ 1.264807] ath: Regpair used: 0x6c [ 1.266660] ieee80211 phy0: Selected rate control algorithm 'ath9k_btcoex_rate_cotnrol' [ 1.271037] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90015300000, irq=16 [ 1.298667] init: cgroups main process (310) terminated with status 1 [ 1.395425] usb 1-4: new full-speed USB device number 4 using xhci_hcd [ 1.407769] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409 [ 1.409062] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.409904] usb 1-4: New USB device found, idVendor=0489, idProduct=e056 [ 1.409919] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.451430] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 1.490362] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 1.526369] tpm_tis tpm_tis: command 0x65 (size 18) returned code 0x0 [ 1.559103] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 1.620239] tpm_tis tpm_tis: command 0x65 (size 18) returned code 0x0 [ 1.662106] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 1.699095] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 1.720106] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 1.742008] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 1.772043] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 1.807950] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 1.843908] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 1.875876] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 1.917818] tpm_tis tpm_tis: command 0x65 (size 18) returned code 0x0 [ 1.953759] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 1.995697] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 2.031669] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 2.061629] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 2.105593] tpm_tis tpm_tis: command 0x46 (size 14) returned code 0x0 [ 2.129858] tpm_tis tpm_tis: command 0x46 (size 14) returned code 0x0 [ 2.319354] tpm_tis tpm_tis: command 0xa (size 10) returned code 0x0 [ 2.369247] tpm_tis tpm_tis: command 0x65 (size 42) returned code 0x0 [ 2.548675] cfg80211: Calling CRDA for country: US [ 2.551483] cfg80211: Regulatory domain changed to country: US [ 2.551496] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 2.551509] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 2.551520] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm) [ 2.551531] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm) [ 2.551542] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm) [ 2.551552] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm) [ 2.551564] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 2.723374] ieee80211 phy0: device now idle [ 2.730543] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2.764283] ieee80211 phy0: device no longer idle - scanning [ 3.361868] tpm_tis tpm_tis: command 0x41 (size 618) returned code 0x0 [ 3.397044] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 3.438896] tpm_tis tpm_tis: command 0xba (size 18) returned code 0x22 [ 3.478249] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 3.515873] tpm_tis tpm_tis: command 0xa (size 10) returned code 0x0 [ 3.546830] tpm_tis tpm_tis: command 0xa (size 10) returned code 0x0 [ 3.582809] tpm_tis tpm_tis: command 0x65 (size 18) returned code 0x0 [ 4.062330] tpm_tis tpm_tis: command 0x1e (size 319) returned code 0x0 [ 4.092126] tpm_tis tpm_tis: command 0xba (size 18) returned code 0x22 [ 4.188720] tpm_tis tpm_tis: command 0x21 (size 59) returned code 0x0 [ 4.223939] tpm_tis tpm_tis: command 0xba (size 18) returned code 0x22 [ 4.253996] tpm_tis tpm_tis: command 0xa (size 10) returned code 0x0 [ 4.301863] tpm_tis tpm_tis: command 0x65 (size 42) returned code 0x0 [ 4.415172] frecon(229): Chrome started, splash screen is not needed anymore. [ 4.445818] low_mem: setting minfree to 211968 kB [ 4.454516] zsmalloc: module is from the staging directory, the quality is unknown, you have been warned. [ 4.457335] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 4.457622] zram: num_devices not specified. Using default: 1 [ 4.457634] zram: Creating 1 devices ... [ 4.472494] init: failsafe-delay main process (432) killed by TERM signal [ 4.537237] fuse init (API version 7.20) [ 4.552993] Adding 5838736k swap on /dev/zram0. Priority:-1 extents:1 across:5838736k SS [ 4.558142] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X

[ 4.634235] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8 [ 4.634445] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9 [ 4.635265] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10 [ 4.636578] hda-intel 0000:00:1b.0: Applying patch firmware 'peppy_alsa.fw' [ 4.637963] snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X [ 4.638781] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67) [ 4.647651] usbcore: registered new interface driver uvcvideo [ 4.647664] USB Video Class driver (1.1.1) [ 4.702736] Bluetooth: RFCOMM socket layer initialized [ 4.702755] Bluetooth: RFCOMM ver 1.11 [ 4.743587] i2c /dev entries driver [ 4.833663] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 4.834011] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 5.291715] tpm_tis tpm_tis: command 0x41 (size 618) returned code 0x0 [ 5.327565] tpm_tis tpm_tis: command 0xba (size 18) returned code 0x22 [ 5.363583] tpm_tis tpm_tis: command 0x65 (size 18) returned code 0x0 [ 5.406091] tpm_tis tpm_tis: command 0x21 (size 14) returned code 0x0 [ 6.088701] tpm_tis tpm_tis: command 0x65 (size 18) returned code 0x0 [ 6.121774] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 6.158620] tpm_tis tpm_tis: command 0x65 (size 18) returned code 0x0 [ 6.188715] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 6.224638] tpm_tis tpm_tis: command 0xcf (size 22) returned code 0x0 [ 6.253474] tpm_tis tpm_tis: command 0x15 (size 14) returned code 0x0 [ 6.309466] tpm_tis tpm_tis: command 0xb (size 36) returned code 0x0 [ 6.347367] tpm_tis tpm_tis: command 0xa (size 10) returned code 0x0 [ 6.457274] ieee80211 phy0: device now idle [ 6.462816] wlan0: authenticate with 24:de:c6:13:5e:f0 [ 6.462826] ieee80211 phy0: Allocated STA 24:de:c6:13:5e:f0 [ 6.466745] ieee80211 phy0: device no longer idle - in use [ 6.490758] ieee80211 phy0: Inserted STA 24:de:c6:13:5e:f0 [ 6.490766] wlan0: direct probe to 24:de:c6:13:5e:f0 (try 1/3) [ 6.690838] wlan0: send auth to 24:de:c6:13:5e:f0 (try 2/3) [ 6.692979] wlan0: authenticated [ 6.692985] wlan0: moving STA 24:de:c6:13:5e:f0 to state 2 [ 6.700826] wlan0: associate with 24:de:c6:13:5e:f0 (try 1/3) [ 6.704591] wlan0: RX AssocResp from 24:de:c6:13:5e:f0 (capab=0x511 status=0 aid=9) [ 6.704597] wlan0: associated [ 6.704617] wlan0: moving STA 24:de:c6:13:5e:f0 to state 3 [ 6.704626] ieee80211 phy0: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0 [ 6.704633] ieee80211 phy0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0 [ 6.704640] ieee80211 phy0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0 [ 6.704645] ieee80211 phy0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0 [ 6.712048] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 6.712147] cfg80211: Calling CRDA for country: US [ 6.713829] wlan0: dropped frame to 24:de:c6:13:5e:f0 (unauthorized port) [ 6.714322] ath: regdomain 0x8348 updated by CountryIE [ 6.714326] ath: EEPROM regdomain: 0x8348 [ 6.714329] ath: EEPROM indicates we should expect a country code [ 6.714332] ath: doing EEPROM country->regdmn map search [ 6.714335] ath: country maps to regdmn code: 0x3a [ 6.714337] ath: Country alpha2 being used: US [ 6.714339] ath: Regpair used: 0x3a [ 6.714365] cfg80211: Regulatory domain changed to country: US [ 6.714376] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.714388] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 6.714400] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm) [ 6.714411] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm) [ 6.714422] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm) [ 6.714434] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm) [ 6.714445] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 6.752813] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold [ 6.984807] tpm_tis tpm_tis: command 0x18 (size 416) returned code 0x0 [ 7.014494] tpm_tis tpm_tis: command 0xba (size 18) returned code 0x22 [ 7.050461] tpm_tis tpm_tis: command 0xba (size 18) returned code 0x22 [ 7.075431] tpm_tis tpm_tis: command 0x46 (size 14) returned code 0x0 [ 7.115366] wlan0: dropped frame to 24:de:c6:13:5e:f0 (unauthorized port) [ 7.118538] tpm_tis tpm_tis: command 0x46 (size 14) returned code 0x0 [ 7.149414] tpm_tis tpm_tis: command 0x65 (size 20) returned code 0x0 [ 7.179324] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 7.210580] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 7.676658] wlan0: dropped frame to 24:de:c6:13:5e:f0 (unauthorized port) [ 8.116165] wlan0: dropped frame to 24:de:c6:13:5e:f0 (unauthorized port) [ 8.780630] wlan0: moving STA 24:de:c6:13:5e:f0 to state 4 [ 10.372499] tpm_tis tpm_tis: command 0x15 (size 14) returned code 0x0 [ 10.414450] tpm_tis tpm_tis: command 0x14 (size 34) returned code 0x0 [ 10.446427] tpm_tis tpm_tis: command 0x65 (size 18) returned code 0x0 [ 10.488950] tpm_tis tpm_tis: command 0x21 (size 14) returned code 0x0 [ 10.521309] tpm_tis tpm_tis: command 0x65 (size 18) returned code 0x0 [ 10.946819] tpm_tis tpm_tis: command 0x1e (size 274) returned code 0x0 [ 11.077492] tpm_tis tpm_tis: command 0xa (size 10) returned code 0x0 [ 11.131388] tpm_tis tpm_tis: command 0x65 (size 42) returned code 0x0 [ 12.121276] tpm_tis tpm_tis: command 0x41 (size 618) returned code 0x0 [ 12.157104] tpm_tis tpm_tis: command 0xba (size 18) returned code 0x22 [ 12.187211] tpm_tis tpm_tis: command 0x65 (size 18) returned code 0x0 [ 12.235680] tpm_tis tpm_tis: command 0x21 (size 14) returned code 0x0 [ 12.271016] tpm_tis tpm_tis: command 0xa (size 10) returned code 0x0 [ 12.307051] tpm_tis tpm_tis: command 0x65 (size 18) returned code 0x0 [ 12.734447] tpm_tis tpm_tis: command 0x1e (size 274) returned code 0x0 [ 12.770423] tpm_tis tpm_tis: command 0x65 (size 18) returned code 0x0 [ 13.262939] tpm_tis tpm_tis: command 0x1e (size 319) returned code 0x0 [ 13.304342] tpm_tis tpm_tis: command 0xba (size 18) returned code 0x22 [ 29.144352] EXT4-fs (sda1): re-mounted. Opts: commit=600,data=ordered [ 30.440846] systemd-logind[9016]: New seat seat0. [ 30.442767] systemd-logind[9016]: New session c1 of user root. [ 30.459749] systemd-logind[9016]: Failed to create cpuacct:/user/0.user/c1.session: No such file or directory [ 30.459958] systemd-logind[9016]: Failed to create cpuset:/user/0.user/c1.session: No such file or directory [ 30.460160] systemd-logind[9016]: Failed to create devices:/user/0.user/c1.session: No such file or directory [ 30.584437] systemd-logind[9016]: Removed session c1. [ 30.632049] systemd-logind[9016]: New session c2 of user sudonotpseudo. [ 30.654576] systemd-logind[9016]: Failed to create cpuacct:/user/1000.user/c2.session: No such file or directory [ 30.654703] systemd-logind[9016]: Failed to create cpuset:/user/1000.user/c2.session: No such file or directory [ 30.654899] systemd-logind[9016]: Failed to create devices:/user/1000.user/c2.session: No such file or directory [ 31.136595] Valid eCryptfs headers not found in file header region or xattr region, inode 10748826 [ 31.289429] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 [ 31.390331] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 33.713369] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold [ 39.008803] ata1.00: exception Emask 0x10 SAct 0x1 SErr 0x50000 action 0xe frozen [ 39.008816] ata1.00: irq_stat 0x00400000, PHY RDY changed [ 39.008826] ata1: SError: { PHYRdyChg CommWake } [ 39.008835] ata1.00: failed command: READ FPDMA QUEUED [ 39.008847] ata1.00: cmd 60/08:00:38:b2:d4/00:00:0d:00:00/40 tag 0 ncq 4096 in [ 39.008847] res 40/00:00:38:b2:d4/00:00:0d:00:00/40 Emask 0x10 (ATA bus error) [ 39.008863] ata1.00: status: { DRDY } [ 39.008874] ata1: hard resetting link [ 39.710937] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 39.711193] ata1.00: configured for UDMA/133 [ 39.721952] ata1: EH complete [ 39.772846] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 [ 39.873768] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 3602.797490] tpm_tis tpm_tis: command 0x65 (size 20) returned code 0x0 [ 3602.827422] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 3602.857653] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 7198.450357] tpm_tis tpm_tis: command 0x65 (size 20) returned code 0x0 [ 7198.486291] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 7198.522489] tpm_tis tpm_tis: command 0x65 (size 22) returned code 0x0 [ 8964.674455] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold [ 9260.056849] systemd-logind[9016]: New session c3 of user root. [ 9260.066853] systemd-logind[9016]: Failed to create cpuacct:/user/0.user/c3.session: No such file or directory [ 9260.067109] systemd-logind[9016]: Failed to create cpuset:/user/0.user/c3.session: No such file or directory [ 9260.067461] systemd-logind[9016]: Failed to create devices:/user/0.user/c3.session: No such file or directory [ 9271.869118] EXT4-fs (sda1): re-mounted. Opts: commit=600,data=ordered [ 9272.392682] systemd-logind[16393]: New seat seat0. [ 9272.400951] systemd-logind[16393]: New session c1 of user root. [ 9272.415237] systemd-logind[16393]: Failed to create cpuacct:/user/0.user/c1.session: No such file or directory [ 9272.415360] systemd-logind[16393]: Failed to create cpuset:/user/0.user/c1.session: No such file or directory [ 9272.415478] systemd-logind[16393]: Failed to create devices:/user/0.user/c1.session: No such file or directory [ 9272.463618] systemd-logind[16393]: Removed session c1. [ 9272.523914] systemd-logind[16393]: New session c2 of user root. [ 9272.539106] systemd-logind[16393]: Failed to create cpuacct:/user/0.user/c2.session: No such file or directory [ 9272.539231] systemd-logind[16393]: Failed to create cpuset:/user/0.user/c2.session: No such file or directory [ 9272.539370] systemd-logind[16393]: Failed to create devices:/user/0.user/c2.session: No such file or directory [ 9272.583176] systemd-logind[16393]: Removed session c2. [ 9272.626872] systemd-logind[16393]: New session c3 of user sudonotpseudo. [ 9272.643252] systemd-logind[16393]: Failed to create cpuacct:/user/1000.user/c3.session: No such file or directory [ 9272.643508] systemd-logind[16393]: Failed to create cpuset:/user/1000.user/c3.session: No such file or directory [ 9272.643865] systemd-logind[16393]: Failed to create devices:/user/1000.user/c3.session: No such file or directory [ 9273.060223] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 [ 9273.161196] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 9275.242415] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold [ 9446.887797] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=20539 cmdline="/sbin/modprobe vboxdrv" [ 9446.899784] vboxdrv: Found 4 processor cores [ 9446.900260] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [ 9465.044360] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=22299 cmdline="/sbin/modprobe vboxdrv" [ 9465.050916] vboxdrv: Found 4 processor cores [ 9465.051356] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [ 9465.101538] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=22320 cmdline="/sbin/modprobe vboxdrv" [ 9465.106635] vboxdrv: Found 4 processor cores [ 9465.106794] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [ 9489.876422] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=24245 cmdline="/sbin/modprobe vboxdrv" [ 9489.881356] vboxdrv: Found 4 processor cores [ 9489.881505] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [ 9711.063771] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=26876 cmdline="/sbin/modprobe vboxdrv" [ 9711.069359] vboxdrv: Found 4 processor cores [ 9711.069538] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [ 9727.189872] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=28545 cmdline="/sbin/modprobe vboxdrv" [ 9727.194927] vboxdrv: Found 4 processor cores [ 9727.195137] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [ 9727.253615] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=28566 cmdline="/sbin/modprobe vboxdrv" [ 9727.258619] vboxdrv: Found 4 processor cores [ 9727.258831] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [ 9743.463727] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=30234 cmdline="/sbin/modprobe vboxdrv" [ 9743.469243] vboxdrv: Found 4 processor cores [ 9743.469497] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [ 9801.851915] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=32214 cmdline="/sbin/modprobe vboxdrv" [ 9801.857947] vboxdrv: Found 4 processor cores [ 9801.858156] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [ 9817.970178] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=1438 cmdline="/sbin/modprobe vboxdrv" [ 9817.975273] vboxdrv: Found 4 processor cores [ 9817.975445] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [ 9818.029012] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=1459 cmdline="/sbin/modprobe vboxdrv" [ 9818.035004] vboxdrv: Found 4 processor cores [ 9818.035210] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [ 9853.133960] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=3641 cmdline="/sbin/modprobe vboxdrv" [ 9853.138944] vboxdrv: Found 4 processor cores [ 9853.139160] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [ 9869.599860] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=5358 cmdline="/sbin/modprobe vboxdrv" [ 9869.604926] vboxdrv: Found 4 processor cores [ 9869.605075] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [ 9869.662622] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=5379 cmdline="/sbin/modprobe vboxdrv" [ 9869.668640] vboxdrv: Found 4 processor cores [ 9869.668837] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [ 9886.095136] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=7050 cmdline="/sbin/modprobe vboxdrv" [ 9886.100060] vboxdrv: Found 4 processor cores [ 9886.100224] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [ 9996.998250] systemd-logind[16393]: New session c4 of user root. [ 9997.000026] systemd-logind[16393]: Failed to create cpuacct:/user/0.user/c4.session: No such file or directory [ 9997.000466] systemd-logind[16393]: Failed to create cpuset:/user/0.user/c4.session: No such file or directory [ 9997.000933] systemd-logind[16393]: Failed to create devices:/user/0.user/c4.session: No such file or directory [ 9997.214499] systemd-logind[16393]: Removed session c4. [10041.265405] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=10492 cmdline="/sbin/modprobe vboxdrv" [10041.270415] vboxdrv: Found 4 processor cores [10041.270559] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [10058.633885] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=12181 cmdline="/sbin/modprobe vboxdrv" [10058.639292] vboxdrv: Found 4 processor cores [10058.639472] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [10058.705550] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=12202 cmdline="/sbin/modprobe vboxdrv" [10058.710476] vboxdrv: Found 4 processor cores [10058.710728] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [10075.125271] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=13873 cmdline="/sbin/modprobe vboxdrv" [10075.130344] vboxdrv: Found 4 processor cores [10075.130497] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [10156.093448] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=15937 cmdline="/sbin/modprobe vboxdrv" [10156.098316] vboxdrv: Found 4 processor cores [10156.098473] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [10172.184803] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=17838 cmdline="/sbin/modprobe vboxdrv" [10172.189758] vboxdrv: Found 4 processor cores [10172.189927] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [10172.253676] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=17859 cmdline="/sbin/modprobe vboxdrv" [10172.259064] vboxdrv: Found 4 processor cores [10172.259285] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [10188.404549] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=19579 cmdline="/sbin/modprobe vboxdrv" [10188.410381] vboxdrv: Found 4 processor cores [10188.410561] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [10358.637426] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=22133 cmdline="/sbin/modprobe vboxdrv" [10358.642346] vboxdrv: Found 4 processor cores [10358.642533] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [10378.921334] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=23872 cmdline="/sbin/modprobe vboxdrv" [10378.929407] vboxdrv: Found 4 processor cores [10378.931079] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [10378.989179] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=23893 cmdline="/sbin/modprobe vboxdrv" [10378.994978] vboxdrv: Found 4 processor cores [10378.995177] supdrvGipCreate: failed to allocate the GIP page. rc=-26 [10402.091827] Chromium OS LSM: init_module locking-ignored module="/lib/modules/3.8.11/misc/vboxdrv.ko" pid=25603 cmdline="/sbin/modprobe vboxdrv" [10402.096765] vboxdrv: Found 4 processor cores [10402.096910] supdrvGipCreate: failed to allocate the GIP page. rc=-26

divx118 commented 7 years ago

Ah this seems the same issue as on #45 lets track it there. I have a chromebook with 3.8.11 kernel so it should be possible for me to reproduce. For now I am closing this and we will track it in #45 if it turns out to be a different issue I will reopen this. Thanks for given the detailed output and sorry for the lack of time that I have that the repo here is still broken, because of the bad header.