search

diyhue / diyHue

Main diyHue software repo
https://diyhue.org/
Other
1.57k stars 279 forks source link

Fresh Install - No connection to the bridge #833

Closed Xorfee closed 2 years ago

Xorfee commented 2 years ago

Describe the issue

After fresh install of my bridge, I am not able to pair the bridge with hue essentials or homebridge anymore

Steps you tried

  1. Fresh install of my Raspberry PI (Docker / Compose installed)
  2. Tried to set up diyHue via Hostinstall (not helped)
  3. Deinstalled Host instance and used Docker instead with MAC Adress provided for Host and Bridge Mode (IP was provided)
  4. Installed / reinstalled Hue essentials on IOS several times

How we can help

Installed Hue essentials in the latest version, Raspberry PI on the latest version. Nothing helped at all

Logs

2022-06-19 07:15:44,918 - configManager.argumentHandler - INFO - Using Host 192.168.178.10:80 2022-06-19 07:15:44,918 - configManager.argumentHandler - INFO - Host MAC given as e45f0150e6d7 2022-06-19 07:15:44,918 - configManager.argumentHandler - INFO - IP range for light discovery: 0-255 2022-06-19 07:15:44,918 - configManager.argumentHandler - INFO - Deconz IP given as 127.0.0.1 2022-06-19 07:15:44,918 - configManager.argumentHandler - INFO - Online Discovery/Remote API Enabled! 2022-06-19 07:15:44,923 - configManager.argumentHandler - INFO - Using Host 192.168.178.10:80 2022-06-19 07:15:44,923 - configManager.argumentHandler - INFO - Host MAC given as e45f0150e6d7 2022-06-19 07:15:44,923 - configManager.argumentHandler - INFO - IP range for light discovery: 0-255 2022-06-19 07:15:44,923 - configManager.argumentHandler - INFO - Deconz IP given as 127.0.0.1 2022-06-19 07:15:44,924 - configManager.argumentHandler - INFO - Online Discovery/Remote API Enabled! 2022-06-19 07:15:44,925 - configManager.argumentHandler - INFO - Debug logging disabled! 2022-06-19 08:15:44,954 - configManager.configHandler - INFO - Config loaded 2022-06-19 08:15:45,179 - services.stateFetch - INFO - start lights sync 2022-06-19 08:15:45,180 - services.ssdp - INFO - starting ssdp... 2022-06-19 08:15:45,180 - services.ssdp - INFO - start ssdp broadcast 2022-06-19 08:15:45,183 - services.mdns - INFO - listener started

Docker Info (please complete the following information):

Checklist

Additional context

mariusmotea commented 2 years ago

Can you tell what Hue Essentials is show on screen after you try to pair? Are the env variables set correctly with the values of the eth0 interface of the Rapsbery PI ?

Xorfee commented 2 years ago

image

It shows nothing

And to the second point I am not sure how to do this

mariusmotea commented 2 years ago

use ip a command.

Example:

marius@raspberrypi:~ $ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether dc:a6:32:fe:78:a6 brd ff:ff:ff:ff:ff:ff
    inet 192.168.10.23/24 brd 192.168.10.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 2a02:2f04:d405:f500:def5:3fff:fefe:78b6/64 scope global dynamic mngtmpaddr 
       valid_lft 2591805sec preferred_lft 604605sec
    inet6 fe80::dea6:32ff:fefe:78b6/64 scope link 
       valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether dc:a6:32:fe:34:a7 brd ff:ff:ff:ff:ff:ff
4: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default 
    link/ether 02:42:0c:ef:9b:08 brd ff:ff:ff:ff:ff:ff
    inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0

in this example the IP of eth0 is 192.168.10.23 and the MAC of eth0 is dc:a6:32:fe:78:a6

Xorfee commented 2 years ago

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group defa ult qlen 1000 link/ether e4:5f:01:50:e6:d7 brd ff:ff:ff:ff:ff:ff inet 192.168.1.2/24 brd 192.168.1.255 scope global eth0 valid_lft forever preferred_lft forever inet 192.168.178.20/24 brd 192.168.178.255 scope global dynamic noprefixrout e eth0 valid_lft 863954sec preferred_lft 755954sec inet6 2001:9e8:be0f:9e00:2e3a:b1a0:712a:954c/64 scope global dynamic mngtmpa ddr noprefixroute valid_lft 7147sec preferred_lft 3547sec inet6 fe80::c915:8d53:f79c:5a81/64 scope link valid_lft forever preferred_lft forever 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qle n 1000 link/ether e4:5f:01:50:e6:d9 brd ff:ff:ff:ff:ff:ff 4: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOW N group default link/ether 02:42:e4:32:fb:82 brd ff:ff:ff:ff:ff:ff inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0 valid_lft forever preferred_lft forever

So my IP Adress on my Router is 192.168.178.20

EDIT: Changed the IP Adress cause i resetted my Router bc of this issue

Xorfee commented 2 years ago

did a new reinstall now with WIFI instead of Ethernet.. still no connection. Changed IP Adress again.

Fresh install just with updates and Host install ... no luck at all

Xorfee commented 2 years ago

EDIT: Link Button didnt worked on my PC.. went to my phone instead .. works now -.-

mariusmotea commented 2 years ago

LinkButton don't work if the browser were the button is clicked has a clock offset bigger than 30 seconds. Check the time on the Raspberry PI and your PC. Probably the PC is in different timezone or has no NTP synchronization .

Xorfee commented 2 years ago

Yes u r right... my clock wasn´t correct