search

diyruz / flower

DIY Zigbee flower sensor
https://modkam.ru/?p=1700
GNU General Public License v3.0
388 stars 79 forks source link

Does not work with ZHA (Zigbee Home Assistant) #35

Open visstro opened 3 years ago

visstro commented 3 years ago

Hi,

I have tested the device and it works correctly with Zigbee2MQTT, but not ZHA. The device can be added to ZHA: image Unfortunately, no sensor data is recognized or displayed by Home Assistant. Other sensors and lights are working fine, so I think there might be some quirk or non-standard behavior that needs patching.

Please help with finding the root cause of this issue. I have an embedded programming background, but I am not sufficiently familiar with Zigbee to quickly jump into the problem.

MatthijsThijssen commented 3 years ago

Dear sender,

I will be out of the office starting 03 August through 16 August returning. During this period i have limited access to my email. I will respond to your emails as soon as possible upon my return. You can also send your message to @.*** so one of my colleague can follow up. Thank you for your message

nurikk commented 3 years ago

Hello, try to use latest version 2.1.0

visstro commented 3 years ago

I got the assembled and "ready to use" device. I guess that I will need CC debugger for flashing? Or is OTA possible?

nurikk commented 3 years ago

Yes, you need a cc debugger. You can find flashing instructions and some support here https://github.com/diyruz/flower/issues/33

pooyashahidi commented 3 years ago

running the latest version (2.1.0) I think I have the same problem. I am able to add the device to ZHA but it only shows the following entities: image

The illuminance value looks wrong battery started at 128% and is now 32% which also does not make sense.

If I'm not mistaken the humidity, pressure and temperature entities should come from the bme280 sensor that I do not need and did not install and another temperature is for the other optional sensor. so am I correct to assume that the whole soil sensing thing is missing?

Any help is highly appreciated :)

madman2143 commented 3 years ago

I have the same issue. The soil moisture is not reported when using ZHA.

I am also running the latest firmware.

Hedda commented 2 years ago

Suggest that you report it by starting a new discussion about this device here -> https://github.com/zigpy/zha-device-handlers

https://github.com/zigpy/zha-device-handlers/issues

More information on why here -> https://www.home-assistant.io/integrations/zha/#zha-exception-and-deviation-handling