I am trying to work mhuxd on Ubuntu Studio 20.04.04 LTS with Ubuntu Studio 20.04.03LTS(upgraded to latest)
WFview 1.61 package can not connect via /dev/mhuxd/cat2. Of course permision is set to 777.
log of mhuxd:
2023-05-30 13:07:22.785 INF serial: Opened port: "/dev/mhuxd/cat2"
2023-05-30 13:07:22.785 INF serial: Opened pt device: 24 , attempting to grant pt status
log of WFview:
2023-05-30 13:07:22.785 WARN (vsp) cat2 ioctl 0x802c542a not implemented!
2023-05-30 13:07:22.785 WARN (vsp) cat2 ioctl 0x541e not implemented!
2023-05-30 13:07:22.785 INFO (vsp) cat2 Baud rate set to 19200
I build of WFView and mhuxed from source, but same result.
WSJT-Z 2.5.4-1.33 and Hamlib 4.5.5
I also build WSJT-Z 2.5.4-1.33 and Hamlib 4.5.5from source.
I tried to connect via /dev/mhuxd but no luck.
log of mhuxd:
2023-05-30 13:16:56.153 INFO (vsp) cat1 req open
2023-05-30 13:16:56.154 INFO (vsp) cat1 Baud rate set to 9600
2023-05-30 13:16:57.689 INFO (vsp) cat1 Baud rate set to 19200
2023-05-30 13:16:57.689 INFO (vsp) cat1 req release
log of WSJT-Z:
Hamlib error: read_string_generic(): RX 7 characters, direct=1
0000 fe fe 5c e1 15 02 fd ......
icom_one_transaction: frm_len=7, frm_len-1=fd, frm_len-2=02
0:frame.c(403):icom_one_transaction returning(0)
-1:frame.c(455):icom_transaction returning(0)
../../../rigs/icom/icom.c(1682) trace
set_vfo_curr: vfo=VFOA, curr_vfo=VFOA
set_vfo_curr: curr_vfo now=VFOA
icom.c(9456):set_vfo_curr returning2(0)
icom_get_freq: wrong frame len=1
-2:icom.c(1733):icom_get_freq returning(-9) Command rejected by the rig
rig_get_freq(2147): freqMainA=0, modeMainA=, widthMainA=0
rig_get_freq(2147): freqMainB=0, modeMainB=, widthMainB=0
rig_get_cache(258): vfo=VFOA, current_vfo=VFOA
rig_get_cache(434): vfo=VFOA, freq=0, mode=, width=0
rig_set_cache_freq(121): vfo=VFOA, current_vfo=VFOA
-3:rig_get_freq: elapsed=58ms
Command rejected by the rig
Command rejected by the rig
while getting current frequency
I am trying to work mhuxd on Ubuntu Studio 20.04.04 LTS with Ubuntu Studio 20.04.03LTS(upgraded to latest)
icom_one_transaction: frm_len=7, frm_len-1=fd, frm_len-2=02 0:frame.c(403):icom_one_transaction returning(0) -1:frame.c(455):icom_transaction returning(0) ../../../rigs/icom/icom.c(1682) trace set_vfo_curr: vfo=VFOA, curr_vfo=VFOA set_vfo_curr: curr_vfo now=VFOA icom.c(9456):set_vfo_curr returning2(0) icom_get_freq: wrong frame len=1 -2:icom.c(1733):icom_get_freq returning(-9) Command rejected by the rig
rig_get_freq(2147): freqMainA=0, modeMainA=, widthMainA=0 rig_get_freq(2147): freqMainB=0, modeMainB=, widthMainB=0 rig_get_cache(258): vfo=VFOA, current_vfo=VFOA rig_get_cache(434): vfo=VFOA, freq=0, mode=, width=0 rig_set_cache_freq(121): vfo=VFOA, current_vfo=VFOA -3:rig_get_freq: elapsed=58ms Command rejected by the rig Command rejected by the rig while getting current frequency
I hope to fi these problems....
Thanks in Advance!
Tosy, Tosyuki MORIYAMA JA6VZB also AH0T, ex T88JA