Open paulocoutinhox opened 4 years ago
It says for some reason it's not compatible with hp and Lenovo, I don't know why, but it's the same size as the one you already have, and antennas fit great with plastic cover. It works flawlessly, everything works on mac and windows, it has same chipset as original mac wifi card. I've got mine from here
You need to open your efi folder > clover > acpi > origin and copy DSDT.aml to folder "patched" after that restart.
The thing is, if you don't have everything patched before, this won't work. Try using my EFI folder or at least copy patched lines from my config.plist and copy mine patched folder and replace it with yours.
Or you can find online how to patch your dsdt, there are tutorials.
Good luck :)
I copy your folder EFI and put on EFI partition.
It show a screen to boot with a MI logo but always stop the progress bar.
Did you generated serial id and done the setup in config.plist before? You need to do that it's important. Do you know how to do it, as I can't realize how much you are into this?
No. My notebook already one EFI folder from Olarila. I deleted it and put yours to check. In your tutorial the serial is after enter on mac with your EFI, no?
Yes, but you need to boot with USB with installation and proper EFI folder that works for you, to boot into the system, after that you need to copy new EFI folder and edit config.plist
After booting to your system, with clover configurator, edit config.plist and generate serial id model number, etc.. (you can find a lot of tutorials on this). It's important to this properly because your facetime, iMessage and AppStore won't work.
You are saying that im need reinstall? Because im already have a version with working app store etc.
No, you don't need to reinstall the system, I said you need to have proper config.plist in order to get a working system with imessage and facetime and other stuff.
When you boot with to your system with USB that you used to install system, do the stuff that I said, and give me feedback so we can go further.
Is this that im not understanding. What USB? I don't use USB to boot.
You posted few minutes ago that you can't boot to system, and posted picture? I said If you have trouble booting to system, use USB that you used to install macOS.
The boot on system only NOT happen when i use your EFI folder. You mean that i need use your EFI folder but boot from USB?
NO.
You need to read carefully, everything I post, take your time. Can you boot back to your system, or not?
Yes, and now i can boot using your EFI folder. But i need use USB to select "boot from macos".
The trackpad appear and the energy bar too.
Im inside on macos system again using your EFI.
Just to be clear.
1 - Im booting from USB. If i don't boot from usb the notebook go to your logo/boot screen and when i select "boot from macos" it stop on that progressbar.
2 - I put your EFI into my SSD folder. The USB already have one.
Okay, when you boot with USB it uses EFI that is on USB.
Ok. But what is the steps now. I already have the origin folder.
This are the steps now?
1 - I need copy DSTS.iml to patched folder? 2 - Run kextcache on terminal 3 - Reboot?
That is the step, after that if you boot successfully, you need to do steps that you mentioned.
But what you mean with "edit config properly"?
See on this video on 2:11 min he is setting up config.plist
I followed the tutorial: https://hackintosher.com/forums/thread/generate-your-own-hackintosh-serial-number-board-serial-number-uuid-mlb-rom-in-clover.306/
Generate new serial etc but the problem is the same. It stop on the progress bar.
Boot in verbose and see what error message you get. When booting, go to boot options and add -v and boot
Hi,
This is the log:
You need to check on tonymac how to properly do log dump. My suggestion is to do some more research about hackintosh overall and learn some basics.
Anyway, it's best to use your own EFI that works for you. 1.Use my kexts for trackpad (voodooi2c and Synaptics) - you need to remove your's voodoo kexts
After that I will help you to patch it, let me know how it goes.
I replace mine kext folder with yours and now the trackpad stop work, only the mouse usb is working.
The energy bar appear and show energy normal.
I can't use my kext with your energy kext only? What i need do now?
The trackpad is unknown.
It's important to read everything I say, as I can't repeat myself in each post.
1.Use my kexts for trackpad (voodooi2c and Synaptics) - you need to remove your's voodoo kexts
After that I will help you to patch it, let me know how it goes.
Hi,
Im already to what you say. And my trackpad not work. This is what happen.
In the boot log say that mine is ELAN. There is something wrong?
And when i use only these two kexts that you sad the trackpad works, but other things like battery no and the trackpad still not found.
Hi,
I have a Lenovo S145 15IWL and i have some questions :)
Im Paulo from other post on voodoo. I don't know if you remember me.
1 - Your wifi card mean that is not compatible with Lenovo: https://pt.aliexpress.com/i/4000631751046.html
2 - Im already using EFI folder from Olarila: https://www.olarila.com/topic/6874-olarila-hackbook-lenovo-ideapad-s145-mojave-catalina-full-dsdt-patches-clover-and-opencore/#comments
But i need now make trackpad and energy bar work. I extract my DSTS from Boot pressing F4: https://www.dropbox.com/s/j72xa7nghfze20g/acpi-origin.zip?dl=1
What i need do now? Only need copy folder patched to my ACPI folder?
Can you help me :)