Closed soupman98 closed 5 months ago
djtimca
commented
5 months ago I don't have Chlorinator done yet - that's already an open issue request #44.
Heater is managed through modes - have a look at the services available in the documentation.
I do not see anything related to "Freeze Protect" in the API documentation unfortunately. Not sure what it does as I don't have that on my pool. When it gets cold we close it here in Canada :)
soupman98
commented
5 months ago I see in the 3rd party HACS integration a couple of alarms.. (Pump, Chlorinator, I'm wondering if that might be freeze protect status.
So here's the skinny on freeze protect... You enable it in the Hayward controller and set a temperature. You have to enable it on your body of water (main pump) and water features. It looks like the backyard features have freeze protect too? My MSP dump would seem to indicate that.
In my case i have 1 bubbler (and an associated powered valve) and 3 deck jets (and an associated powered valve). You also set the freeze protect RPMS for the pump (not sure about complex setups with multiple pumps for spas and water falls , I just have one VSP.
When the air temp sensor reads below the freeze protect value, it starts the pump, sets it to speed, moved the valves to necessary position. From what I understand others.. the Omnipool may turn water features on an off because of how spas spill to pools and such. I think it's 30m intervals.
When it's in Freeze Protect mode - the app and control panel screens indicates that. I can manually override the pump speed to higher than but not lower than the FP speed.
I have an old MSP dump from my Omnipool, but can't recall how to pull a new one.. I forget if it's via the web browser to H/OP.
[What Happens While An Omni Is In Freeze Protect]
There are alarms for backyard lights (relays) and pool lights (odd) but alarms for freeze status makes sense to me for bubbler, heater, jets, and pump (makes sense if F/Protect) [cid:65230464-c50c-4ab2-9bfe-90c987de6290]
From: djtimca @.> Sent: Monday, January 22, 2024 2:54 PM To: djtimca/haomnilogic @.> Cc: Steve Campbell @.>; Author @.> Subject: Re: [djtimca/haomnilogic] Freeze Protect status (Issue #56)
I don't have Chlorinator done yet - that's already an open issue request #44https://github.com/djtimca/haomnilogic/issues/44.
Heater is managed through modes - have a look at the services available in the documentation.
I do not see anything related to "Freeze Protect" in the API documentation unfortunately. Not sure what it does as I don't have that on my pool. When it gets cold we close it here in Canada :)
— Reply to this email directly, view it on GitHubhttps://github.com/djtimca/haomnilogic/issues/56#issuecomment-1904795050, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ADUPRMIG5Y7IV4C4CVCWQL3YP3GX3AVCNFSM6AAAAABCF3ANQOVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMBUG44TKMBVGA. You are receiving this because you authored the thread.Message ID: @.***>
I just managed to get this added to my Raspberry Pi 4 running HA. Thanks so much.
Some things I don't yet see Heater status -> on/off Chlorinator status -> on/off Freeze Protect mode status (main pump) -> on/off Freeze Protect mode status (water features) -> on/off Freeze protect settings (what temp does it kick on)?
Glad to help test or even play with coding.. noob in the space though