Question regarding the hardware setup

dkjonas / Wavin-AHC-9000-mqtt

Esp8266 mqtt interface for Wavin AHC-9000/Jablotron AC-116

MIT License

86 stars 36 forks source link

Question regarding the hardware setup #13

Closed maisun closed 4 years ago

maisun commented 5 years ago

Hi Jonas,

Thank you for sharing the project, it is great to allow home automation systems to control central heating system through MQTT. I'd very much like to give a try but not sure how to start, I have no experience with the hardware you mentioned and how to connet them. Would it be possible to share some tutorial on how to assemble the device and/or are you interested in selling the device? Thank you in advance!

dkjonas commented 5 years ago

Hi,

The parts and connections are listed here: https://github.com/dkjonas/Wavin-AHC-9000-mqtt It is not that hard to connect, but if you don't have experience doing it, it can understand it may be difficult to follow those instructions.

I think the best I can do is to try to verify your connections before you connect the circuit to the AHC. Like in this issue: https://github.com/dkjonas/Wavin-AHC-9000-mqtt/issues/7 (look at the bottom for pictures)