dkoch83 Marlin-1.1.9_Anycubic_Chiron issues

dkoch83 / Marlin-1.1.9_Anycubic_Chiron

Anycubic Chiron Firmware based on Marlin-1.1.9

GNU General Public License v3.0

32 stars 19 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Bump qs from 6.5.2 to 6.5.3 in /buildroot/share/vscode/AutoBuildMarlin

#20 dependabot[bot] opened 1 year ago
0
Bump minimatch from 3.0.4 to 3.1.2 in /buildroot/share/vscode/AutoBuildMarlin

#19 dependabot[bot] opened 1 year ago
0
FilamentRunout causes message flickering on NEW Anycubic DISPLAY (DARK BLUE)

#18 illuminati05 opened 1 year ago
1
Maximum possible temperature in Configuration.h is reduced by 15 degress in temperature.h

#17 illuminati05 closed 2 years ago
1
TMC 2208 with linear advance and stelathcop stops extruder motor during print

#16 illuminati05 closed 3 years ago
1
Bug: then M25 do pause no "continue" buttons on display

#15 KazakovAndrey closed 3 years ago
1
M25 pause bugfix

#14 KazakovAndrey closed 3 years ago
0
Not a bug, but a question from a dev without a chiron ;)

#13 knutwurst closed 3 years ago
4
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER causes errors

#12 illuminati05 closed 3 years ago
4
New requirement for "Filament sensor message cannot be canceled" when starting when using an external sensor

#11 raindancer2204 closed 2 years ago
0
Chiron with firmware 1.3.5, new LCD supported?

#10 gaby64 closed 3 years ago
9
Z raise before power loss

#9 illuminati05 closed 3 years ago
0
Z homin is not working like in original anycubic firmware

#8 illuminati05 closed 3 years ago
1
Motor extruder stop

#7 wayp55 closed 4 years ago
2
Dual Z Homing issue

#6 cryoplay closed 4 years ago
2
Filament Runout sensor

#5 NellyGTI closed 4 years ago
6
hello, one problem with your firmware on my Chiron: when i want to perform a auto bed level with the sensor, after homing the head moves too high and then the sensor stops before reaching the bed, any idea? Christophe

#4 CMET64 closed 4 years ago
5
SD Card Reader don't work.

#3 cryoplay closed 5 years ago
16
Pin layout for tmc2208 UART

#2 Laurens95 closed 5 years ago
1
pins.xxx.h

#1 faschi closed 5 years ago
2