Open mph88 opened 1 year ago
Thanks for the report. Yes, the SX1268 is a different chip, currently only the SX1278 is supported. The chips are different, at least frequency programming for SX1268 is different, so I'll have to see if this can be added to the firmware. But unfortunately I don't have any SX1268 for testing. If I manage to get one delivered to Germany before Jan 1st I might give it a try...
Any progress on the SX1268 support?
Unfortunately not, still haven't got a board to test myself.
I can provide a board on loan if that helps. I can't use it until the firmware is updated, in any case.
Hi @dl9rdz
any news about support for that chip ?
Thanks
Hi! @dl9rdz Any news in topic implementation SX1268 If you need someone to test i can help :)
Describe the bug The SX1268 does not turn on. The serial output shows that communication with the chip does not occur, as the frequency setting nor gain settings at startup apply. Additionally it reports power on FAILED and the frequency plot shows a flat line. Communication of the ESP32 over wifi, configuring settings, GPS all work ok and unit does not panic and restart during failure to connect to SX1268.
To Reproduce Flashed with PlatformIO using latest dev version.
Expected behavior Chip turns on and is tunable.
Screenshots N/A
Version and specific configuration: Board: TTGO T-Beam V1.1 SX1268 version flashed: devel20221113
Additional context Serial Output:
Configuing SX1278FSK SPI with miso=19, mosi=27, sck=5, ss=18
170
Setting freq: SUCCESS
Frequency set to 682666624.00
170
Setting freq: SUCCESS
Frequency set to 682666624.00
RX LNA Gain is -36
SX1278 configuration finished
Setup finished
...
MAIN: Running loop in state 0 [currentDisp:0, lastDisp:0]. free heap: 125328, unused stack: 5208
170
Setting SX1278 power on FAILED
Sonde::setup() done: Type RS41 Freq 682.666624, AFC BW: 100000, RX BW: 100000
TOO MUCH DATA
Sonde::timeoutEvent: NORX
Sonde:receive(): result 1 (RX_TIMEOUT), event 0b => action 93
RXtask: start DECODER for sonde 19 (was DECODER)
Sonde::setup() start on index 19
waitRXcomplete returning 9301 (RX_TIMEOUT)
MAIN: loopDecoder: action 93 (Sonde=19) => 65 [current: main=19, rxtask=19]
MAIN: updateDisplay started
MAIN: updateDisplay done (after 71 ms)