search

dl9rdz / rdz_ttgo_sonde

267 stars 93 forks source link

M10 sonde [enhancement] #9

Closed b4sh closed 4 years ago

b4sh commented 5 years ago

Is it possible to add M10 sonde to decoder? If needed i can send working M10 sonde to author.

dl9rdz commented 5 years ago

I don't see any M10 in my location (the closest launch site with M10, Vienna, is >300km away), but if I get a working M10 and have some spare time available, I can give it a try. No promise :-) My address: Hansi Reiser, DL9RDZ, Stephanstr. 151, 94034 Passau, Germany.

It should be possible to receive M10 with the TTGO LORA, as F5ZJ seems to have a working implementation. Unfortunately I am unable to contact him (contact form on his site http://keraman.free.fr/ is dysfunctional, and I did not find any other way to contact him).

sp3rat commented 5 years ago

Hello :) It is e-mail to F5ZJ kera5@free.fr

I wrote to Michel f5zj 2019.03.31 :) Jurek

b4sh commented 5 years ago

It turned out that my M10 sonde is damaged. When I hunt a new one, I will prepare a package.

oe3jtb commented 5 years ago

Hi Hansi, still open your M10 request? If yes , you have friends at Schärding or other near OE town? 73 Alex, OE3JTB

oe6pwe commented 5 years ago

Hello, Contact me I can send you a M10. 73 Wolfgang, OE6PWE

ok2it commented 5 years ago

mee too , let me know if needed.

dl9rdz commented 5 years ago

Thanks to Wolfgang for sending me two M10 👍

I will see what I can do.... might take a few weeks though as I am about to leave for holidays beginning of August, and then in September I am organizing the next HAMNET meeting in Passau (and a few other things...)

dl9rdz commented 4 years ago

I have added some code for M10 in devel20191101. Not much tested, but it decodes the two M10s I got :-) Unlike the french software, it does not require wiring SX127x's DIO2 to an ESP32 GPIO pin, but instead attempts to use the FIFO, even if the modulation/frame format is not a good match to the RF chip's features... Not sure how reliable this works with weak signals though. IDs are dxl new style.

oe3jtb commented 4 years ago

Hansi tnx for implementing M10, OE8JPQ and myself did a first test very fine thank you!!! And others will follow fast :-)

dl9rdz commented 4 years ago

Seems to work fine, so closing this issue :-)