You can use this firmware to wirelessly use your radio as a joystick device.
To use with the a OTX / ETX radio you must have Bluetooth enabled in the firmware, To to Model Setup, Choose Trainer Mode Slave/Bluetooth.
After this scan and connect to the Bluetooth device. The radio should show connected and start streaming the data.
Only 8 channels can be sent. The button's are determined when a channel is below 1250 will set a button or when above above 1750 will set a different one.
You can use this firmware to wirelessly use your radio as a joystick device.
To use with the a OTX / ETX radio you must have Bluetooth enabled in the firmware, To to Model Setup, Choose Trainer Mode Slave/Bluetooth.
After this scan and connect to the Bluetooth device. The radio should show connected and start streaming the data.
Only 8 channels can be sent. The button's are determined when a channel is below 1250 will set a button or when above above 1750 will set a different one.
Firmware: https://github.com/dlktdr/BTWifiModule/suites/7269980264/artifacts/292570297