search

dllhlx / inxi

Automatically exported from code.google.com/p/inxi
0 stars 0 forks source link

sensors mis-labeled & incomplete. #15

Closed GoogleCodeExporter closed 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1.install inxi, lmsensors, and configure.
2.run inxi -s
3.read

What is the expected output?

sensors data from all gpus, cpus, and motherboard temperature readings, and 
fan speeds from detected fans.

What do you see instead?

temerature for one of my two temperature reporting GPUS, both which 
individually report, three fan speeds out of seven sensors and 2 actual 
fans, reversed sys and mo-bo fan speed (the last one probably fault of 
sensors, not inxi), no known way to reconfigure it.

Sensors:   System Temperatures: cpu: 39.0C mobo: 36.0C gpu: 64C 
           Fan Speeds (in rpm): cpu: 1440 mobo: 1140 sys-1: 0 
(sys-1 is a sensorless fan on that is ACTUALLY on the mobo, where my true 
system fan is reporting here to mobo.)

What version of the product are you using? On what operating system?

System:    Host arch-desktop Kernel 2.6.31-ARCH x86_64 (64 bit) Distro Arch 
Linux

Please paste your inxi output below.

System:    Host arch-desktop Kernel 2.6.31-ARCH x86_64 (64 bit) Distro Arch 
Linux
CPU:       Quad core Intel Core2 Quad Q6600 (SMP) cache 4096 KB flags (sse3 
nx lm vmx) 
           Clock Speeds: (1) 2400.475 MHz (2) 2400.475 MHz (3) 2400.475 MHz 
(4) 2400.475 MHz
Graphics:  Card-1 nVidia G86 [GeForce 8500 GT] Card-3 nVidia G73 [GeForce 
7600 GT] X.Org 1.7.1 Res: 1680x1050@50.0hz 
           GLX Renderer GeForce 8500 GT/PCI/SSE2, GeForce 7600 GT/PCI/SSE2 
GLX Version 3.2.0 NVIDIA 190.42, 2.1.2 NVIDIA 190.42
Audio:     Card nVidia MCP55 High Definition Audio driver HDA Intel
           Sound: Advanced Linux Sound Architecture Version 1.0.20
Network:   Card-1 Atheros AR5001 Wireless Network Adapter driver ath5k
           Card-2 2x nVidia MCP55 Ethernet driver forcedethforcedeth
Disks:     HDD Total Size: 750.2GB (4.3% used) 1: /dev/sda ST3250410AS 
250.1GB 
           2: USB /dev/sdf 5000AAV External 500.1GB 
Partition: ID:/ size: 19G used: 6.6G (38%) fs: ext3 ID:/home size: 93G 
used: 24G (27%) fs: ext4 
           ID:swap-1 size: 1.14GB used: 0.00GB (0%) fs: swap 
Sensors:   System Temperatures: cpu: 38.0C mobo: 37.0C gpu: 64C 
           Fan Speeds (in rpm): cpu: 1440 mobo: 1080 sys-1: 0 
Info:      Processes 145 Uptime 1:54 Memory 343.2/3960.4MB Client Shell 
inxi 1.2.5 

Please paste your 'cat /proc/cpuinfo' output below.

processor   : 0
vendor_id   : GenuineIntel
cpu family  : 6
model       : 15
model name  : Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
stepping    : 11
cpu MHz     : 2400.475
cache size  : 4096 KB
physical id : 0
siblings    : 4
core id     : 0
cpu cores   : 4
apicid      : 0
initial apicid  : 0
fpu     : yes
fpu_exception   : yes
cpuid level : 10
wp      : yes
flags       : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx 
lm constant_tsc arch_perfmon pebs bts rep_good pni dtes64 monitor ds_cpl 
vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow vnmi flexpriority
bogomips    : 4802.98
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor   : 1
vendor_id   : GenuineIntel
cpu family  : 6
model       : 15
model name  : Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
stepping    : 11
cpu MHz     : 2400.475
cache size  : 4096 KB
physical id : 0
siblings    : 4
core id     : 3
cpu cores   : 4
apicid      : 3
initial apicid  : 3
fpu     : yes
fpu_exception   : yes
cpuid level : 10
wp      : yes
flags       : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx 
lm constant_tsc arch_perfmon pebs bts rep_good pni dtes64 monitor ds_cpl 
vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow vnmi flexpriority
bogomips    : 4801.03
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor   : 2
vendor_id   : GenuineIntel
cpu family  : 6
model       : 15
model name  : Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
stepping    : 11
cpu MHz     : 2400.475
cache size  : 4096 KB
physical id : 0
siblings    : 4
core id     : 1
cpu cores   : 4
apicid      : 1
initial apicid  : 1
fpu     : yes
fpu_exception   : yes
cpuid level : 10
wp      : yes
flags       : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx 
lm constant_tsc arch_perfmon pebs bts rep_good pni dtes64 monitor ds_cpl 
vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow vnmi flexpriority
bogomips    : 4801.01
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor   : 3
vendor_id   : GenuineIntel
cpu family  : 6
model       : 15
model name  : Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
stepping    : 11
cpu MHz     : 2400.475
cache size  : 4096 KB
physical id : 0
siblings    : 4
core id     : 2
cpu cores   : 4
apicid      : 2
initial apicid  : 2
fpu     : yes
fpu_exception   : yes
cpuid level : 10
wp      : yes
flags       : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx 
lm constant_tsc arch_perfmon pebs bts rep_good pni dtes64 monitor ds_cpl 
vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow vnmi flexpriority
bogomips    : 4801.01
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

please paste your 'cat /proc/meminfo' output below.

MemTotal:        4055400 kB
MemFree:         3378120 kB
Buffers:           23880 kB
Cached:           303260 kB
SwapCached:            0 kB
Active:           387164 kB
Inactive:         197548 kB
Active(anon):     266024 kB
Inactive(anon):        0 kB
Active(file):     121140 kB
Inactive(file):   197548 kB
Unevictable:           0 kB
Mlocked:               0 kB
SwapTotal:       1116476 kB
SwapFree:        1116476 kB
Dirty:                72 kB
Writeback:             0 kB
AnonPages:        257604 kB
Mapped:            77812 kB
Slab:              38836 kB
SReclaimable:      23516 kB
SUnreclaim:        15320 kB
PageTables:        11688 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:     3144176 kB
Committed_AS:     644484 kB
VmallocTotal:   34359738367 kB
VmallocUsed:      108284 kB
VmallocChunk:   34359625723 kB
DirectMap4k:       34752 kB
DirectMap2M:     4159488 kB

please paste your 'sensors' output below.

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +52.0°C  (high = +82.0°C, crit = +100.0°C)  

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +44.0°C  (high = +82.0°C, crit = +100.0°C)  

coretemp-isa-0002
Adapter: ISA adapter
Core 2:      +47.0°C  (high = +82.0°C, crit = +100.0°C)  

coretemp-isa-0003
Adapter: ISA adapter
Core 3:      +42.0°C  (high = +82.0°C, crit = +100.0°C)  

abituguru3-isa-00e0
Adapter: ISA adapter
CPU Core:          +1.32 V  (min =  +0.00 V, max =  +1.60 V)
DDR2:              +1.86 V  (min =  +1.50 V, max =  +2.20 V)
DDR2 VTT:          +0.92 V  (min =  +0.75 V, max =  +1.10 V)
CPU VTT:           +2.40 V  (min =  +1.90 V, max =  +2.90 V)
NB 1.2V:           +1.35 V  (min =  +1.10 V, max =  +1.60 V)
SB 1.5V:           +1.53 V  (min =  +1.20 V, max =  +1.80 V)
HyperTransport:    +1.23 V  (min =  +0.95 V, max =  +1.45 V)
ATX +12V (24-Pin):+12.00 V  (min =  +9.60 V, max = +14.40 V)
ATX +12V (4-pin): +12.00 V  (min =  +9.60 V, max = +14.40 V)
ATX +5V:           +5.07 V  (min =  +3.99 V, max =  +6.00 V)
ATX +3.3V:         +3.32 V  (min =  +2.64 V, max =  +3.94 V)
ATX 5VSB:          +5.10 V  (min =  +3.99 V, max =  +6.00 V)
CPU FAN:          1380 RPM  (min =  300 RPM)
SYS FAN:          1140 RPM  (min =  300 RPM)
AUX1 FAN:            0 RPM  (min =  300 RPM)  ALARM
AUX2 FAN:            0 RPM  (min =  300 RPM)  ALARM
AUX3 FAN:            0 RPM  (min =  300 RPM)  ALARM
CPU:               +37.0°C  (high = +75.0°C, crit = +85.0°C)  
System:            +37.0°C  (high = +55.0°C, crit = +65.0°C)  
PWM Phase1:        +53.0°C  (high = +125.0°C, crit = +135.0°C)  
PWM Phase2:        +53.0°C  (high = +125.0°C, crit = +135.0°C)  
PWM Phase3:        +54.0°C  (high = +125.0°C, crit = +135.0°C)  
PWM Phase4:        +53.0°C  (high = +125.0°C, crit = +135.0°C)  
PWM Phase5:        +53.0°C  (high = +125.0°C, crit = +135.0°C) 

##ok, so maybe the system fan is reporting right...##

Attached is a screenshot with various other maybe useful things

Original issue reported on code.google.com by archerse...@gmail.com on 3 Nov 2009 at 12:34

Attachments:

GoogleCodeExporter commented 9 years ago 
[max@arch-desktop:~]$ nvidia-settings -q screens

2 X Screens on arch-desktop:0

    [0] arch-desktop:0.0 (GeForce 8500 GT)

    [1] arch-desktop:0.1 (GeForce 7600 GT)

[max@arch-desktop:~]$ nvidia-settings -c :0.1 -q GPUCoreTemp

  Attribute 'GPUCoreTemp' (arch-desktop:0.1): 58.
    'GPUCoreTemp' is an integer attribute.
    'GPUCoreTemp' is a read-only attribute.
    'GPUCoreTemp' can use the following target types: X Screen, GPU.

[max@arch-desktop:~]$ nvidia-settings -c :0.0 -q GPUCoreTemp

  Attribute 'GPUCoreTemp' (arch-desktop:0.0): 67.
    'GPUCoreTemp' is an integer attribute.
    'GPUCoreTemp' is a read-only attribute.
    'GPUCoreTemp' can use the following target types: X Screen, GPU.

[max@arch-desktop:~]$ nvidia-settings -c :0 -q GPUCoreTemp

  Attribute 'GPUCoreTemp' (arch-desktop:0.0): 67.
    'GPUCoreTemp' is an integer attribute.
    'GPUCoreTemp' is a read-only attribute.
    'GPUCoreTemp' can use the following target types: X Screen, GPU.
  Attribute 'GPUCoreTemp' (arch-desktop:0.1): 57.
    'GPUCoreTemp' is an integer attribute.
    'GPUCoreTemp' is a read-only attribute.
    'GPUCoreTemp' can use the following target types: X Screen, GPU.

Original comment by archerse...@gmail.com on 3 Nov 2009 at 3:37

GoogleCodeExporter commented 9 years ago 
This is now fixed, for the multiple nvidia gpu problem.

The temp misreporting is not a bug, and is just something that inxi will do now 
and then.

Now shows multiple nvidia gpu core temp output, with screen number attached to 
each gpu temp.

Also for single gpu, shows screen number only if -x or -F option is used, 
otherwise just shows temp, 
since that's what most people wlll have no need to create output.

Original comment by inxi-...@techpatterns.com on 16 Nov 2009 at 7:36