Docker hv-sock proxy (vsudd) is not reachable

rogermac commented 7 years ago

Expected behavior

Docker to start

Actual behavior

Docker fails with error 'Docker hv-sock proxy (vsudd) is not reachable'

Information

Windows 10 Enterprise - Version 1607 (OS Build 14393, 447) Parallels Desktop 12 (with nested virtualization) - Version 12.1.1 (41491)

Diagnostic ID: 77F37409-16FA-428D-A2F3-5D7FEDC8B39D/2016-11-30_22-15-20

Previously was getting the error 'The VM couldn't get an IP address after 60 tries' as discussed here: https://github.com/docker/for-win/issues/54

Then updated to Beta 1.13.0 rc2 as recommended to resolve, however now get the following error:

Docker hv-sock proxy (vsudd) is not reachable at Docker.Backend.ContainerEngine.Linux.ConnectToVsud(TaskCompletionSource`1 vmId) at Docker.Backend.ContainerEngine.Linux.DoStart(Settings settings) at Docker.Backend.ContainerEngine.Linux.Start(Settings settings) at Docker.Core.Pipe.NamedPipeServer.<>c__DisplayClass8_0.b__0(Object[] parameters) at Docker.Core.Pipe.NamedPipeServer.RunAction(String action, Object[] parameters)

Here is the log:

Version: 1.13.0-rc2-beta31 (9123) Channel: Beta Sha1: de6f6c2e8d5ff4561b88bc212b9e2833b8684e4c Started on: 2016/11/30 22:12:36.656 Resources: C:\Program Files\Docker\Docker\Resources OS: Windows 10 Enterprise Edition: Enterprise Id: 1607 Build: 14393 BuildLabName: 14393.447.amd64fre.rs1_release_inmarket.161102-0100 File: C:\Users\RJ\AppData\Local\Docker\log.txt CommandLine: "C:\Program Files\Docker\Docker\Docker for Windows.exe" You can send feedback, including this log file, at https://github.com/docker/for-win/issues [22:12:36.793][GUI ][Info ] Starting... [22:12:37.564][Tracking ][Info ] Crash report and usage statistics are enabled [22:12:37.564][SegmentApi ][Info ] Usage statistic: appLaunched [22:12:37.680][NamedPipeClient][Info ] Sending Version()... [22:12:37.695][NamedPipeClient][Info ] Received response for Version [22:12:37.710][SegmentApi ][Info ] Usage statistic: heartbeat [22:12:12.842][BackendServer ][Info ] Started [22:12:37.695][NamedPipeServer][Info ] Version() [22:12:37.695][NamedPipeServer][Info ] Version done in 00:00:00. [22:12:38.027][Updater ][Info ] Checking for updates on channel Beta... [22:12:38.027][NamedPipeClient][Info ] Sending Start(Docker.Core.Settings)... [22:12:38.043][NamedPipeServer][Info ] Start(Docker.Core.Settings) [22:12:38.059][HyperV ][Info ] Create [22:12:38.061][HyperVGuids ][Info ] Installing GUIDs... [22:12:38.062][PowerMode ][Info ] Start [22:12:38.062][HyperVGuids ][Info ] GUIDs installed [22:12:38.080][Firewall ][Info ] Opening ports for C:\Program Files\Docker\Docker\Resources\com.docker.proxy.exe... [22:12:38.127][PowerShell ][Info ] Run script with parameters: -Create True -SwitchSubnetAddress 10.0.75.0 -SwitchSubnetMaskSize 24 -CPUs 2 -Memory 2048 -IsoFile C:\Program Files\Docker\Docker\Resources\mobylinux.iso... [22:12:38.143][PowerShell ][Info ] Creating a Runspace Pool... [22:12:38.196][Updater ][Info ] Local build 9123 is as good as the remote 9123 on channel Beta [22:12:39.580][PowerShell ][Info ] Runspace Pool created (Min=1, Max=2) [22:12:39.923][HyperV ][Info ] Script started at 22:12:39.923 [22:12:41.127][Firewall ][Info ] Ports are opened [22:12:42.853][HyperV ][Info ] Module loaded at 22:12:42.853 [22:12:43.983][HyperV ][Info ] Using existing Switch: DockerNAT [22:12:44.577][HyperV ][Info ] Using existing Switch IP address [22:12:46.499][HyperV ][Info ] Creating VM MobyLinuxVM... [22:12:47.733][HyperV ][Info ] Setting CPUs to 2 and Memory to 2048 MB [22:12:48.124][HyperV ][Info ] Attach VHD C:\Users\Public\Documents\Hyper-V\Virtual Hard Disks\MobyLinuxVM.vhdx [22:12:48.624][HyperV ][Info ] Connect Internal Switch DockerNAT [22:12:48.967][HyperV ][Info ] Attach DVD C:\Program Files\Docker\Docker\Resources\mobylinux.iso [22:12:49.889][HyperV ][Info ] VM created. [22:12:49.889][HyperV ][Debug ] [create] took 00:00:11.8246405 to run [22:12:49.889][PowerShell ][Info ] Run script '(Get-VM MobyLinuxVM).Id.Guid'... [22:12:49.936][DataKit ][Info ] Starting C:\Program Files\Docker\Docker\Resources\com.docker.db.exe --url hyperv-connect://702c03a6-193a-4958-a44f-f59db8e82866,\.\pipe\dockerDataBase --color never [22:12:50.015][DataKit ][Info ] Started [22:12:50.015][Database ][Info ] Generating CA Cert Bundle [22:12:50.046][Database ][Info ] CA Cert Bundle Generated [22:12:50.077][DataKit ][Info ] Starting com.docker.db.exe 0.7.0-34-g6f04213 ... [22:12:50.109][DataKit ][Info ] com.docker.db.exe: accepted a new connection on \.\pipe\dockerDataBase [22:12:50.109][Database ][Info ] Writing com.docker.driver.amd64-linux/net/config=static [22:12:50.109][Database ][Info ] Writing com.docker.driver.amd64-linux/net/address=10.0.75.2 [22:12:50.109][Database ][Info ] Writing com.docker.driver.amd64-linux/net/netmask=255.255.255.0 [22:12:50.109][Database ][Info ] Writing com.docker.driver.amd64-linux/net/gateway=10.0.75.1 [22:12:50.109][Database ][Info ] Writing com.docker.driver.amd64-linux/network=hybrid [22:12:50.109][Database ][Info ] Writing com.docker.driver.amd64-linux/etc/docker/daemon.json={"registry-mirrors":[],"insecure-registries":[]} [22:12:50.109][Database ][Info ] Writing com.docker.driver.amd64-linux/etc/sysctl.conf= [22:12:50.109][Database ][Info ] Writing com.docker.driver.amd64-linux/native/port-forwarding=true [22:12:50.240][DataKit ][Info ] com.docker.db.exe: accepted a new connection on \.\pipe\dockerDataBase [22:12:50.241][DataKit ][Info ] com.docker.db.exe: Using protocol TwoThousand msize 16384 [22:12:50.469][Database ][Info ] Successfully wrote 8 value(s) [22:12:50.469][Database ][Info ] Writing com.docker.driver.amd64-linux/etc/ssl/certs/ca-certificates.crt=C:\Windows\TEMP\tmpBE5E.tmp [22:12:50.518][DataKit ][Info ] com.docker.db.exe: accepted a new connection on \.\pipe\dockerDataBase [22:12:50.518][DataKit ][Info ] com.docker.db.exe: Using protocol TwoThousand msize 16384 [22:12:50.599][Database ][Info ] Successfully wrote value [22:12:50.599][Moby ][Info ] Connecting... [22:12:50.599][Moby ][Error ] Failed to read Moby's logs: The operation has timed out. [22:12:50.615][HyperV ][Info ] Start [22:12:50.615][PowerShell ][Info ] Run script with parameters: -Start True... [22:12:50.615][HyperV ][Info ] Script started at 22:12:50.615 [22:12:50.615][PowerShell ][Info ] Run script '$(Find-NetRoute -RemoteIPAddress 8.8.8.8).InterfaceIndex[0]'... [22:12:50.646][HyperV ][Info ] Module loaded at 22:12:50.646 [22:12:50.662][HyperV ][Info ] Starting VM MobyLinuxVM... [22:12:51.521][HyperV ][Debug ] [start] took 00:00:00.9064480 to run [22:12:52.662][Moby ][Info ] Connected [22:12:52.974][Database ][Info ] Writing com.docker.driver.amd64-linux/slirp/dns=nameserver 194.168.4.100 nameserver 194.168.8.100 [22:12:53.026][DataKit ][Info ] com.docker.db.exe: accepted a new connection on \.\pipe\dockerDataBase [22:12:53.026][DataKit ][Info ] com.docker.db.exe: Using protocol TwoThousand msize 16384 [22:12:53.095][Database ][Info ] Successfully wrote 1 value(s) [22:12:53.126][Moby ][Info ] done. [22:12:53.126][Moby ][Info ] Booting the kernel. [22:12:53.126][VpnKit ][Info ] Starting C:\Program Files\Docker\Docker\Resources\com.docker.slirp.exe --ethernet hyperv-connect://702c03a6-193a-4958-a44f-f59db8e82866 --port hyperv-connect://702c03a6-193a-4958-a44f-f59db8e82866 --db \.\pipe\dockerDataBase --debug --diagnostics \.\pipe\dockerVpnKitDiagnostics [22:12:53.158][Moby ][Info ] Linux version 4.8.10-moby (root@1d811a9194c4) (gcc version 5.3.0 (Alpine 5.3.0) ) #1 SMP Mon Nov 21 22:02:05 UTC 2016 [22:12:53.173][Moby ][Info ] Command line: earlyprintk=ttyS0,115200 console=ttyS0,115200 mobyplatform=windows rootdelay=300 noautodetect [22:12:53.173][Moby ][Info ] [22:12:53.173][Moby ][Info ] Disabled fast string operations [22:12:53.189][VpnKit ][Info ] Started [22:12:53.189][Linux ][Info ] Trying to connect to vsud... [22:12:53.204][Moby ][Info ] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [22:12:53.223][Moby ][Info ] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [22:12:53.223][Moby ][Info ] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[22:12:53.298][Moby [22:12:53.329][Moby [22:12:53.329][Moby [22:12:53.345][Moby [22:12:53.345][Moby [22:12:53.361][Moby [22:12:53.361][Moby [22:12:53.376][Moby [22:12:53.376][Moby [22:12:53.392][Moby [22:12:53.392][Moby [22:12:53.407][Moby [22:12:53.407][Moby [22:12:53.423][Moby [22:12:53.423][Moby [22:12:53.439][Moby [22:12:53.439][Moby [22:12:53.455][Moby [22:12:53.470][Moby [22:12:53.470][Moby [22:12:53.486][Moby [22:12:53.486][Moby [22:12:53.501][Moby [22:12:53.501][Moby [22:12:53.501][Moby [22:12:53.517][Moby [22:12:53.517][Moby [22:12:53.532][Moby [22:12:53.548][Moby [22:12:53.564][Moby [22:12:53.564][Moby [22:12:53.579][Moby [22:12:53.595][Moby [22:12:53.595][Moby [22:12:53.611][Moby [22:12:53.642][Moby [22:12:53.657][Moby [22:12:53.673][Moby [22:12:53.673][Moby [22:12:53.689][Moby [22:12:53.707][Moby [22:12:53.707][Moby [22:12:53.720][Moby [22:12:53.720][Moby [22:12:53.720][Moby [22:12:53.736][Moby [22:12:53.736][Moby [22:12:53.736][Moby [22:12:53.751][Moby [22:12:53.767][Moby [22:12:53.767][Moby [22:12:53.783][Moby [22:12:53.783][Moby [22:12:53.798][Moby [22:12:53.798][Moby [22:12:53.814][Moby [22:12:53.814][Moby [22:12:53.814][Moby [22:12:53.829][Moby [22:12:53.845][Moby [22:12:53.861][Moby [22:12:53.861][Moby [22:12:53.876][Moby [22:12:53.876][Moby [22:12:53.876][Moby [22:12:53.892][Moby [22:12:53.892][Moby [22:12:53.907][Moby [22:12:53.907][Moby [22:12:53.907][Moby [22:12:53.923][Moby [22:12:53.923][Moby [22:12:53.970][Moby [22:12:53.970][Moby [22:12:53.986][Moby [22:12:53.986][Moby [22:12:53.986][Moby [22:12:54.001][Moby [22:12:54.001][Moby [22:12:54.017][Moby [22:12:54.017][Moby [22:12:54.017][Moby [22:12:54.986][Moby [22:12:54.986][VpnKit [22:12:54.986][VpnKit [22:12:54.986][VpnKit [22:12:54.986][VpnKit [22:12:54.986][VpnKit [22:12:54.986][VpnKit [22:12:54.986][VpnKit [22:12:54.986][VpnKit [22:12:54.986][VpnKit [22:12:54.986][VpnKit [22:12:55.001][Moby [22:12:55.001][Moby [22:13:53.457][Linux [22:13:53.457][PowerShell [22:13:59.800][HyperV [22:13:59.800][HyperV [22:13:59.800][PowerShell [22:13:59.815][HyperV [22:14:00.038][HyperV [22:14:00.605][HyperV [22:14:00.902][HyperV [22:14:00.976][HyperV [22:14:00.976][HyperV [22:14:00.976][PowerMode [22:14:00.976][HyperV [22:14:00.976][PowerShell [22:14:00.976][HyperV [22:14:00.976][HyperV [22:14:01.023][HyperV [22:14:03.382][Moby [22:14:03.397][Moby [22:14:03.694][HyperV [22:14:03.898][HyperV [22:14:07.015][HyperV [22:14:07.019][HyperV [22:14:08.501][HyperV [22:14:08.758][HyperV [22:14:08.775][HyperV [22:14:08.775][OptimizeDisk [22:14:08.775][PowerShell [22:14:08.808][Moby [22:14:08.808][VpnKit [22:14:08.823][DataKit [22:14:08.839][HyperV [22:14:08.839][PowerShell [22:14:08.839][HyperVGuids [22:14:08.839][PowerMode [22:14:08.839][Firewall [22:14:08.839][HyperVGuids [22:14:08.917][HyperV [22:14:08.933][HyperV [22:14:09.050][HyperV [22:14:10.972][HyperV [22:14:11.019][Firewall [22:14:11.339][HyperV [22:14:11.355][HyperV [22:14:13.411][HyperV [22:14:14.386][HyperV [22:14:15.548][HyperV [22:14:16.158][HyperV [22:14:16.649][HyperV [22:14:18.114][HyperV [22:14:18.114][HyperV [22:14:18.114][PowerShell [22:14:18.242][DataKit [22:14:18.242][DataKit [22:14:18.242][Database [22:14:18.257][Database [22:14:18.367][DataKit [22:14:18.383][Database [22:14:18.383][Database [22:14:18.383][Database [22:14:18.383][Database [22:14:18.383][Database [22:14:18.383][Database [22:14:18.383][Database [22:14:18.383][Database [22:14:18.383][DataKit [22:14:18.449][DataKit [22:14:18.451][DataKit [22:14:18.799][Database [22:14:18.799][Database [22:14:18.834][DataKit [22:14:18.835][DataKit [22:14:18.896][Database [22:14:18.896][Moby [22:14:18.896][Moby [22:14:18.896][HyperV [22:14:18.896][PowerShell [22:14:18.896][PowerShell [22:14:18.896][HyperV [22:14:18.911][HyperV [22:14:18.927][HyperV [22:14:18.959][Database nameserver 194.168.8.100 [22:14:19.024][DataKit [22:14:19.025][DataKit [22:14:19.409][HyperV [22:14:19.709][Database [22:14:19.761][VpnKit [22:14:19.761][VpnKit [22:14:19.761][Linux [22:14:19.824][VpnKit [22:14:19.824][VpnKit [22:14:19.824][VpnKit [22:14:19.824][VpnKit [22:14:19.824][VpnKit [22:14:19.824][VpnKit [22:14:20.127][VpnKit [22:14:20.127][VpnKit [22:14:20.444][VpnKit [22:14:20.444][VpnKit [22:14:20.912][Moby [22:14:21.954][Moby [22:14:21.954][Moby [22:14:21.970][Moby [22:14:21.986][Moby [22:14:21.986][Moby [22:14:22.001][Moby [22:14:22.001][Moby [22:14:22.017][Moby [22:14:22.033][Moby ][Info ] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. ][Info ] x86/fpu: Using 'eager' FPU context switches. ][Info ] e820: BIOS-provided physical RAM map: ][Info ] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable ][Info ] BIOS-e820: [mem 0x0000000000100000-0x000000007eeedfff] usable ][Info ] BIOS-e820: [mem 0x000000007eeee000-0x000000007eef1fff] ACPI data ][Info ] BIOS-e820: [mem 0x000000007eef2000-0x000000007ef1afff] reserved ][Info ] BIOS-e820: [mem 0x000000007ef1b000-0x000000007ff9afff] usable ][Info ] BIOS-e820: [mem 0x000000007ff9b000-0x000000007fff2fff] reserved ][Info ] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffafff] ACPI data ][Info ] BIOS-e820: [mem 0x000000007fffb000-0x000000007fffefff] ACPI NVS ][Info ] BIOS-e820: [mem 0x000000007ffff000-0x000000007fffffff] usable ][Info ] bootconsole [earlyser0] enabled ][Info ] NX (Execute Disable) protection: active ][Info ] efi: EFI v2.31 by EDK II ][Info ] efi: ACPI=0x7fffa000 ACPI 2.0=0x7fffa014 SMBIOS=0x7fff2000 PROP=0x3fda3d8 MEMATTR=0x7f525d18 ][Info ] SMBIOS 2.4 present. ][Info ] Hypervisor detected: Microsoft HyperV ][Info ] HyperV: features 0x2e7f, hints 0x2c2c ][Info ] HyperV: LAPIC Timer Frequency: 0x1e8480 ][Info ] clocksource: hyperv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns ][Info ] tsc: Marking TSC unstable due to running on Hyper-V ][Info ] e820: last_pfn = 0x80000 max_arch_pfn = 0x400000000 ][Info ] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
][Info ] RAMDISK: [mem 0x7882c000-0x7b87dfff] ][Info ] ACPI: Early table checksum verification disabled ][Info ] ACPI: RSDP 0x000000007FFFA014 000024 (v02 VRTUAL) ][Info ] ACPI: XSDT 0x000000007FFF90E8 00005C (v01 VRTUAL MICROSFT 00000001 MSFT 00000001) ][Info ] ACPI: FACP 0x000000007FFF7000 0000F4 (v04 VRTUAL MICROSFT 00000001 MSFT 00000001) ][Info ] ACPI: DSDT 0x000000007EEEF000 00256F (v02 MSFTVM DSDT01 00000001 MSFT 04000000) ][Info ] ACPI: FACS 0x000000007FFFE000 000040 ][Info ] ACPI: APIC 0x000000007FFF8000 0007D2 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001) ][Info ] ACPI: OEM0 0x000000007FFF6000 000064 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001) ][Info ] ACPI: WAET 0x000000007FFF5000 000028 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001) ][Info ] ACPI: OEM1 0x000000007FFF4000 00009E (v02 MSFTVM UARTS 00000001 MSFT 04000000) ][Info ] ACPI: OEM2 0x000000007FFF3000 0002E2 (v02 MSFTVM VTPM2 00000001 MSFT 04000000) ][Info ] ACPI: SRAT 0x000000007EEEE000 000190 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001) ][Info ] Zone ranges: ][Info ] DMA [mem 0x0000000000001000-0x0000000000ffffff] ][Info ] DMA32 [mem 0x0000000001000000-0x000000007fffffff] ][Info ] Normal empty ][Info ] Movable zone start for each node ][Info ] Early memory node ranges ][Info ] node 0: [mem 0x0000000000001000-0x000000000009ffff] ][Info ] node 0: [mem 0x0000000000100000-0x000000007eeedfff] ][Info ] node 0: [mem 0x000000007ef1b000-0x000000007ff9afff] ][Info ] node 0: [mem 0x000000007ffff000-0x000000007fffffff] ][Info ] Initmem setup node 0 [mem 0x0000000000001000-0x000000007fffffff] ][Info ] ACPI: PM-Timer IO Port: 0x408 ][Info ] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ][Info ] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ][Info ] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ][Info ] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ][Info ] Using ACPI (MADT) for SMP configuration information ][Info ] smpboot: 240 Processors exceeds NR_CPUS limit of 128 ][Info ] smpboot: Allowing 128 CPUs, 126 hotplug CPUs ][Info ] e820: [mem 0x80000000-0xffffffff] available for PCI devices ][Info ] Booting paravirtualized kernel on bare hardware ][Info ] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns ][Info ] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:128 nr_node_ids:1 ][Info ] percpu: Embedded 35 pages/cpu @ffff880076800000 s105048 r8192 d30120 u262144 ][Info ] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515799 ][Info ] Kernel command line: earlyprintk=ttyS0,115200 console=ttyS0,115200 mobyplatform=windows rootdelay=300 noautodetect ][Info ] ][Info ] log_buf_len individual max cpu contribution: 4096 bytes ][Info ] log_buf_len total cpu_extra contributions: 520192 bytes ][Info ] log_buf_len min size: 131072 bytes ][Info ] log_buf_len: 1048576 bytes ][Info ] early log buf free: 122780(93%) ][Info ] PID hash table entries: 4096 (order: 3, 32768 bytes) ][Info ] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) ][Info ] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) ][Info ] Memory: 1960424K/2096184K available (8442K kernel code, 1394K rwdata, 2848K rodata, 1372K init, 588K bss, 135760K reserved, 0K cma-reserved) ][Info ] Hierarchical RCU implementation. ][Info ] Build-time adjustment of leaf fanout to 64. ][Info ] Using NULL legacy PIC ][Info ] NR_IRQS:8448 nr_irqs:1448 0 ][Info ] Console: colour dummy device 80x25 ][Info ] console [ttyS0] enabled ][Info ] console [ttyS0] enabled ][Info ] bootconsole [earlyser0] disabled ][Info ] bootconsole [earlyser0] disabled ][Info ] tsc: Fast TSC calibration failed ][Info ] com.docker.slirp.exe: Logging to stdout (stdout:true DEBUG:false) ][Info ] com.docker.slirp.exe: Setting handler to ignore all SIGPIPE signals ][Info ] com.docker.slirp.exe: vpnkit version %VERSION% with hostnet version %HOSTNET_PINNED% uwt version 0.0.3 hvsock version 0.11.1 %HVSOCK_PINNED% ][Info ] com.docker.slirp.exe: starting port forwarding server on port_control_url:hyperv-connect://702c03a6-193a-4958-a44f-f59db8e82866 vsock_path: ][Info ] com.docker.slirp.exe: connecting to 702c03a6-193a-4958-a44f-f59db8e82866:0B95756A-9985-48AD-9470-78E060895BE7 ][Debug ] com.docker.slirp.exe: Waiting for connections on socket hyperv-connect://702c03a6-193a-4958-a44f-f59db8e82866 ][Info ] com.docker.slirp.exe: connecting to 702c03a6-193a-4958-a44f-f59db8e82866:30D48B34-7D27-4B0B-AAAF-BBBED334DD59 ][Debug ] com.docker.slirp.exe: Waiting for connections on socket hyperv-connect://702c03a6-193a-4958-a44f-f59db8e82866 ][Error ] com.docker.slirp.exe: While watching /etc/resolv.conf: ENOENT ][Info ] com.docker.slirp.exe: hosts file has bindings for .psf Mac psf ][Info ] tsc: Unable to calibrate against PIT ][Info ] tsc: HPET/PMTIMER calibration failed ][Error ] Failed to start: Docker hv-sock proxy (vsudd) is not reachable. Let's retry ][Info ] Run script... ][Info ] Hyper-V is running ][Info ] Create ][Info ] Run script with parameters: -Create True -SwitchSubnetAddress 10.0.75.0 -SwitchSubnetMaskSize 24 -CPUs 2 -Memory 2048 -IsoFile C:\Program Files\Docker\Docker\Resources\mobylinux.iso... ][Info ] Script started at 22:13:59.815 ][Info ] Module loaded at 22:14:00.038 ][Info ] Using existing Switch: DockerNAT ][Info ] Using existing Switch IP address ][Info ] VM MobyLinuxVM is Running. Cannot change its settings. ][Debug ] [create] took 00:00:01.1753580 to run ][Info ] Stop ][Info ] Stop ][Info ] Run script with parameters: -Stop True... ][Info ] Script started at 22:14:00.976 ][Info ] Module loaded at 22:14:00.976 ][Info ] Stopping VM MobyLinuxVM... ][Info ] Calibrating delay loop... ][Error ] Failed to read Moby's logs: The operation has timed out. ][Info ] Turn Off VM ... ][Info ] VM MobyLinuxVM killed. Waiting for state to change ][Info ] Killed VM MobyLinuxVM is off ][Info ] Destroying Switch DockerNAT... ][Info ] Removing VM MobyLinuxVM... ][Info ] Delete VHD C:\Users\Public\Documents\Hyper-V\Virtual Hard Disks\MobyLinuxVM.vhdx ][Debug ] [stop] took 00:00:07.7988877 to run ][Info ] Optimize ][Info ] Run script... ][Info ] Stop ][Info ] Killing existing com.docker.slirp with PID 7984 ][Info ] Killing existing com.docker.db with PID 5468 ][Info ] Create ][Info ] Run script with parameters: -Create True -SwitchSubnetAddress 10.0.75.0 -SwitchSubnetMaskSize 24 -CPUs 2 -Memory 2048 -IsoFile C:\Program Files\Docker\Docker\Resources\mobylinux.iso... ][Info ] Installing GUIDs... ][Info ] Start ][Info ] Opening ports for C:\Program Files\Docker\Docker\Resources\com.docker.proxy.exe... ][Info ] GUIDs installed ][Info ] Script started at 22:14:08.917 ][Info ] Module loaded at 22:14:08.933 ][Info ] Creating Switch: DockerNAT... ][Info ] Switch created. ][Info ] Ports are opened ][Info ] Set IP address on switch ][Info ] Creating VM MobyLinuxVM... ][Info ] Setting CPUs to 2 and Memory to 2048 MB ][Info ] Creating dynamic VHD: C:\Users\Public\Documents\Hyper-V\Virtual Hard Disks\MobyLinuxVM.vhdx ][Info ] Attach VHD C:\Users\Public\Documents\Hyper-V\Virtual Hard Disks\MobyLinuxVM.vhdx ][Info ] Connect Internal Switch DockerNAT ][Info ] Attach DVD C:\Program Files\Docker\Docker\Resources\mobylinux.iso ][Info ] VM created. ][Debug ] [create] took 00:00:09.2750812 to run ][Info ] Run script '(Get-VM MobyLinuxVM).Id.Guid'... ][Info ] Starting C:\Program Files\Docker\Docker\Resources\com.docker.db.exe --url hyperv-connect://b6b55236-ef36-4905-b217-e890a8a2e149,\.\pipe\dockerDataBase --color never ][Info ] Started ][Info ] Generating CA Cert Bundle ][Info ] CA Cert Bundle Generated ][Info ] Starting com.docker.db.exe 0.7.0-34-g6f04213 ... ][Info ] Writing com.docker.driver.amd64-linux/net/config=static ][Info ] Writing com.docker.driver.amd64-linux/net/address=10.0.75.2 ][Info ] Writing com.docker.driver.amd64-linux/net/netmask=255.255.255.0 ][Info ] Writing com.docker.driver.amd64-linux/net/gateway=10.0.75.1 ][Info ] Writing com.docker.driver.amd64-linux/network=hybrid ][Info ] Writing com.docker.driver.amd64-linux/etc/docker/daemon.json={"registry-mirrors":[],"insecure-registries":[]} ][Info ] Writing com.docker.driver.amd64-linux/etc/sysctl.conf= ][Info ] Writing com.docker.driver.amd64-linux/native/port-forwarding=true ][Error ] com.docker.db.exe: Named-pipe connection failed on \.\pipe\dockerDataBase: Unix.Unix_error(Unix.EPIPE, "connect", "") ][Info ] com.docker.db.exe: accepted a new connection on \.\pipe\dockerDataBase ][Info ] com.docker.db.exe: Using protocol TwoThousand msize 16384 ][Info ] Successfully wrote 8 value(s) ][Info ] Writing com.docker.driver.amd64-linux/etc/ssl/certs/ca-certificates.crt=C:\Windows\TEMP\tmp1709.tmp ][Info ] com.docker.db.exe: accepted a new connection on \.\pipe\dockerDataBase ][Info ] com.docker.db.exe: Using protocol TwoThousand msize 16384 ][Info ] Successfully wrote value ][Info ] Connecting... ][Error ] Failed to read Moby's logs: The operation has timed out. ][Info ] Start ][Info ] Run script with parameters: -Start True... ][Info ] Run script '$(Find-NetRoute -RemoteIPAddress 8.8.8.8).InterfaceIndex[0]'... ][Info ] Script started at 22:14:18.896 ][Info ] Module loaded at 22:14:18.911 ][Info ] Starting VM MobyLinuxVM... ][Info ] Writing com.docker.driver.amd64-linux/slirp/dns=nameserver 194.168.4.100 ][Info ] com.docker.db.exe: accepted a new connection on \.\pipe\dockerDataBase ][Info ] com.docker.db.exe: Using protocol TwoThousand msize 16384 ][Debug ] [start] took 00:00:00.5133828 to run ][Info ] Successfully wrote 1 value(s) ][Info ] Starting C:\Program Files\Docker\Docker\Resources\com.docker.slirp.exe --ethernet hyperv-connect://b6b55236-ef36-4905-b217-e890a8a2e149 --port hyperv-connect://b6b55236-ef36-4905-b217-e890a8a2e149 --db \.\pipe\dockerDataBase --debug --diagnostics \.\pipe\dockerVpnKitDiagnostics ][Info ] Started ][Info ] Trying to connect to vsud... ][Info ] com.docker.slirp.exe: Logging to stdout (stdout:true DEBUG:false) ][Info ] com.docker.slirp.exe: Setting handler to ignore all SIGPIPE signals ][Info ] com.docker.slirp.exe: vpnkit version %VERSION% with hostnet version %HOSTNET_PINNED% uwt version 0.0.3 hvsock version 0.11.1 %HVSOCK_PINNED% ][Info ] com.docker.slirp.exe: starting port forwarding server on port_control_url:hyperv-connect://b6b55236-ef36-4905-b217-e890a8a2e149 vsock_path: ][Info ] com.docker.slirp.exe: connecting to b6b55236-ef36-4905-b217-e890a8a2e149:0B95756A-9985-48AD-9470-78E060895BE7 ][Debug ] com.docker.slirp.exe: Waiting for connections on socket hyperv-connect://b6b55236-ef36-4905-b217-e890a8a2e149 ][Info ] com.docker.slirp.exe: connecting to b6b55236-ef36-4905-b217-e890a8a2e149:30D48B34-7D27-4B0B-AAAF-BBBED334DD59 ][Debug ] com.docker.slirp.exe: Waiting for connections on socket hyperv-connect://b6b55236-ef36-4905-b217-e890a8a2e149 ][Error ] com.docker.slirp.exe: While watching /etc/resolv.conf: ENOENT ][Info ] com.docker.slirp.exe: hosts file has bindings for .psf Mac psf ][Info ] Connected ][Info ] done. ][Info ] Booting the kernel. ][Info ] Linux version 4.8.10-moby (root@1d811a9194c4) (gcc version 5.3.0 (Alpine 5.3.0) ) #1 SMP Mon Nov 21 22:02:05 UTC 2016 ][Info ] Command line: earlyprintk=ttyS0,115200 console=ttyS0,115200 mobyplatform=windows rootdelay=300 noautodetect ][Info ] ][Info ] Disabled fast string operations ][Info ] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' ][Info ] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' ][Info ] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[22:14:22.064][Moby ][Info ] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [22:14:22.080][Moby ][Info ] x86/fpu: Using 'eager' FPU context switches. [22:14:22.095][Moby ][Info ] e820: BIOS-provided physical RAM map: [22:14:22.126][Moby ][Info ] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [22:14:22.145][Moby ][Info ] BIOS-e820: [mem 0x0000000000100000-0x000000007eeedfff] usable [22:14:22.205][Moby ][Info ] BIOS-e820: [mem 0x000000007eeee000-0x000000007eef1fff] ACPI data [22:14:22.252][Moby ][Info ] BIOS-e820: [mem 0x000000007eef2000-0x000000007ef1afff] reserved [22:14:22.252][Moby ][Info ] BIOS-e820: [mem 0x000000007ef1b000-0x000000007ff9afff] usable [22:14:22.276][Moby ][Info ] BIOS-e820: [mem 0x000000007ff9b000-0x000000007fff2fff] reserved [22:14:22.287][Moby ][Info ] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffafff] ACPI data [22:14:22.304][Moby ][Info ] BIOS-e820: [mem 0x000000007fffb000-0x000000007fffefff] ACPI NVS [22:14:22.320][Moby ][Info ] BIOS-e820: [mem 0x000000007ffff000-0x000000007fffffff] usable [22:14:22.335][Moby ][Info ] bootconsole [earlyser0] enabled [22:14:22.352][Moby ][Info ] NX (Execute Disable) protection: active [22:14:22.352][Moby ][Info ] efi: EFI v2.31 by EDK II [22:14:22.398][Moby ][Info ] efi: ACPI=0x7fffa000 ACPI 2.0=0x7fffa014 SMBIOS=0x7fff2000 PROP=0x3fda3d8 MEMATTR=0x7f525d18 [22:14:22.413][Moby ][Info ] SMBIOS 2.4 present. [22:14:22.429][Moby ][Info ] Hypervisor detected: Microsoft HyperV [22:14:22.460][Moby ][Info ] HyperV: features 0x2e7f, hints 0x2c2c [22:14:22.476][Moby ][Info ] HyperV: LAPIC Timer Frequency: 0x1e8480 [22:14:22.492][Moby ][Info ] clocksource: hyperv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns [22:14:22.507][Moby ][Info ] tsc: Marking TSC unstable due to running on Hyper-V [22:14:22.523][Moby ][Info ] e820: last_pfn = 0x80000 max_arch_pfn = 0x400000000 [22:14:22.554][Moby ][Info ] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[22:14:22.554][Moby ][Info ] RAMDISK: [mem 0x7882c000-0x7b87dfff] [22:14:22.570][Moby ][Info ] ACPI: Early table checksum verification disabled [22:14:22.601][Moby ][Info ] ACPI: RSDP 0x000000007FFFA014 000024 (v02 VRTUAL) [22:14:22.617][Moby ][Info ] ACPI: XSDT 0x000000007FFF90E8 00005C (v01 VRTUAL MICROSFT 00000001 MSFT 00000001) [22:14:22.635][Moby ][Info ] ACPI: FACP 0x000000007FFF7000 0000F4 (v04 VRTUAL MICROSFT 00000001 MSFT 00000001) [22:14:22.663][Moby ][Info ] ACPI: DSDT 0x000000007EEEF000 00256F (v02 MSFTVM DSDT01 00000001 MSFT 04000000) [22:14:22.679][Moby ][Info ] ACPI: FACS 0x000000007FFFE000 000040 [22:14:22.716][Moby ][Info ] ACPI: APIC 0x000000007FFF8000 0007D2 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001) [22:14:22.736][Moby ][Info ] ACPI: OEM0 0x000000007FFF6000 000064 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001) [22:14:22.752][Moby ][Info ] ACPI: WAET 0x000000007FFF5000 000028 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001) [22:14:22.768][Moby ][Info ] ACPI: OEM1 0x000000007FFF4000 00009E (v02 MSFTVM UARTS 00000001 MSFT 04000000) [22:14:22.799][Moby ][Info ] ACPI: OEM2 0x000000007FFF3000 0002E2 (v02 MSFTVM VTPM2 00000001 MSFT 04000000) [22:14:22.814][Moby ][Info ] ACPI: SRAT 0x000000007EEEE000 000190 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001) [22:14:22.846][Moby ][Info ] Zone ranges: [22:14:22.861][Moby ][Info ] DMA [mem 0x0000000000001000-0x0000000000ffffff] [22:14:22.911][Moby ][Info ] DMA32 [mem 0x0000000001000000-0x000000007fffffff] [22:14:22.943][Moby ][Info ] Normal empty [22:14:22.955][Moby ][Info ] Movable zone start for each node [22:14:22.955][Moby ][Info ] Early memory node ranges [22:14:22.971][Moby ][Info ] node 0: [mem 0x0000000000001000-0x000000000009ffff] [22:14:22.986][Moby ][Info ] node 0: [mem 0x0000000000100000-0x000000007eeedfff] [22:14:22.986][Moby ][Info ] node 0: [mem 0x000000007ef1b000-0x000000007ff9afff] [22:14:23.002][Moby ][Info ] node 0: [mem 0x000000007ffff000-0x000000007fffffff] [22:14:23.018][Moby ][Info ] Initmem setup node 0 [mem 0x0000000000001000-0x000000007fffffff] [22:14:23.031][Moby ][Info ] ACPI: PM-Timer IO Port: 0x408 [22:14:23.039][Moby ][Info ] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [22:14:23.056][Moby ][Info ] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [22:14:23.099][Moby ][Info ] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [22:14:23.156][Moby ][Info ] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [22:14:23.216][Moby ][Info ] Using ACPI (MADT) for SMP configuration information [22:14:23.244][Moby ][Info ] smpboot: 240 Processors exceeds NR_CPUS limit of 128 [22:14:23.265][Moby ][Info ] smpboot: Allowing 128 CPUs, 126 hotplug CPUs [22:14:23.291][Moby ][Info ] e820: [mem 0x80000000-0xffffffff] available for PCI devices [22:14:23.315][Moby ][Info ] Booting paravirtualized kernel on bare hardware [22:14:23.351][Moby ][Info ] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [22:14:23.367][Moby ][Info ] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:128 nr_node_ids:1 [22:14:23.415][Moby ][Info ] percpu: Embedded 35 pages/cpu @ffff880076800000 s105048 r8192 d30120 u262144 [22:14:23.435][Moby ][Info ] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515799 [22:14:23.463][Moby ][Info ] Kernel command line: earlyprintk=ttyS0,115200 console=ttyS0,115200 mobyplatform=windows rootdelay=300 noautodetect [22:14:23.463][Moby ][Info ] [22:14:23.475][Moby ][Info ] log_buf_len individual max cpu contribution: 4096 bytes [22:14:23.487][Moby ][Info ] log_buf_len total cpu_extra contributions: 520192 bytes [22:14:23.499][Moby ][Info ] log_buf_len min size: 131072 bytes [22:14:23.512][Moby ][Info ] log_buf_len: 1048576 bytes [22:14:23.523][Moby ][Info ] early log buf free: 122780(93%) [22:14:23.535][Moby ][Info ] PID hash table entries: 4096 (order: 3, 32768 bytes) [22:14:23.551][Moby ][Info ] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [22:14:23.560][Moby ][Info ] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [22:14:23.587][Moby ][Info ] Memory: 1960420K/2096184K available (8442K kernel code, 1394K rwdata, 2848K rodata, 1372K init, 588K bss, 135764K reserved, 0K cma-reserved) [22:14:23.603][Moby ][Info ] Hierarchical RCU implementation. [22:14:23.607][Moby ][Info ] Build-time adjustment of leaf fanout to 64. [22:14:23.619][Moby ][Info ] Using NULL legacy PIC [22:14:23.643][Moby ][Info ] NR_IRQS:8448 nr_irqs:1448 0 [22:14:23.652][Moby ][Info ] Console: colour dummy device 80x25 [22:14:23.662][Moby ][Info ] console [ttyS0] enabled [22:14:23.679][Moby ][Info ] console [ttyS0] enabled [22:14:23.679][Moby ][Info ] bootconsole [earlyser0] disabled [22:14:23.694][Moby ][Info ] bootconsole [earlyser0] disabled [22:14:25.509][Moby ][Info ] tsc: Fast TSC calibration failed [22:14:25.509][Moby ][Info ] tsc: Unable to calibrate against PIT [22:14:25.554][Moby ][Info ] tsc: HPET/PMTIMER calibration failed [22:15:20.078][NamedPipeClient][Error ] Unable to send Start: Docker hv-sock proxy (vsudd) is not reachable [22:15:20.078][NamedPipeServer][Error ] Unable to execute Start: Docker hv-sock proxy (vsudd) is not reachable at Docker.Backend.ContainerEngine.Linux.ConnectToVsud(TaskCompletionSource`1 vmId) at Docker.Backend.ContainerEngine.Linux.DoStart(Settings settings) at Docker.Backend.ContainerEngine.Linux.Start(Settings settings) at Docker.Core.Pipe.NamedPipeServer.<>c__DisplayClass8_0.b__0(Object[] parameters) at Docker.Core.Pipe.NamedPipeServer.RunAction(String action, Object[] parameters) [22:15:20.078][Notifications ][Error ] Docker hv-sock proxy (vsudd) is not reachable [22:15:20.125][CrashReport ][Info ] Preparing package to send with the diagnostics [22:15:20.125][NamedPipeClient][Info ] Sending GetDebugInfo()... [22:15:20.250][NamedPipeClient][Info ] Sending DownloadVmLogs()... [22:15:21.087][NamedPipeServer][Info ] GetDebugInfo() [22:15:22.098][NamedPipeServer][Info ] DownloadVmLogs() [22:15:22.114][PowerShell ][Info ] Run script '(Get-VM MobyLinuxVM).Id.Guid'... [22:15:23.464][NamedPipeClient][Info ] Received response for DownloadVmLogs [22:15:23.459][HyperV ][Warning] Unable to download logs: Connection failed [22:15:23.459][NamedPipeServer][Info ] DownloadVmLogs done in 00:00:01.3607643. [22:15:47.474][NamedPipeServer][Info ] GetDebugInfo done in 00:00:26.3867981. [22:15:47.479][NamedPipeClient][Info ] Received response for GetDebugInfo [22:15:47.578][CrashReport ][Info ] Uploading diagnostics... [22:15:49.549][CrashReport ][Info ] Diagnostics successfully uploaded [22:15:49.586][GUI ][Info ] Sending Bugsnag report fce5b7b3-875c-4ca8-81c8-f6996d97e927... [22:15:51.277][GUI ][Info ] Bugsnag report fce5b7b3-875c-4ca8-81c8-f6996d97e927 sent [22:30:42.890][ErrorReportWindow][Info ] Open logs

sozercan commented 7 years ago

Same issue here (running Parallels 12.1.1 w/ nested virtualization)

482616AF-F981-470F-9AD1-96E07DF0C7F2/2016-11-30_20-10-37

rn commented 7 years ago

@rogermac @sozercan you both seem to run a Windows 10 VM on a Mac using Parallels. Docker for Windows also uses VMs to run a Linux VM for Linux containers (or a minimal VM to run Hyper-V Windows containers). This requires a feature called nested virtualisation in Parallels. We can't really support this scenario because:

Getting nested virtualisation right is very hard and we can test all virtualisation options, like Parallels, if they work correctly.
We have very little to no visibility how your VMs are configured, what else runs on the physical host etc. For these reasons, I'm closing this issue.

@rogermac your Linux VM stops booting after:

[22:14:25.509][Moby ][Info ] tsc: Fast TSC calibration failed
[22:14:25.509][Moby ][Info ] tsc: Unable to calibrate against PIT
[22:14:25.554][Moby ][Info ] tsc: HPET/PMTIMER calibration failed

which is a common problem when running with nested virtualisation.

You seem to be running a Mac. If you want to work with Linux containers, Docker for Mac is a better approach. If you want to work with Windows containers on the Mac, then, for now i would suggest to install Windows 2016 Server and use the native Windows Container feature there. Unlike Hyper-V containers, the native Windows containers on Windows Server do not require nested virtualisation. See https://msdn.microsoft.com/en-us/virtualization/windowscontainers/about/index?f=255&MSPPError=-2147217396 for an explanation of the different container types on Windows

marcospc6 commented 7 years ago

Im having the same problem with the same build of Windows (1607) just after I've installed the anniversary update and the Linux Subsystem (for using bash), I guess this is somehow related but I cant solve it

rn commented 7 years ago

@marcospc6 when you say the same problem, what do you mean? Do you see the same error message? This can have many different reasons. If you provide a diagnostics ID I can take a look

marcospc6 commented 7 years ago

@rneugeba I have been waiting for a while but my internet is not helping with uploading the log, I believe my companys proxy is interfering with it so I will paste the log here:

Version: 1.13.0-rc3-beta32.1 (9324) Channel: Beta Sha1: 31bcc0f6246738430a332a16bb698aa5ea48d80c Started on: 2016/12/14 10:00:02.080 Resources: C:\Program Files\Docker\Docker\Resources OS: Windows 10 Pro Edition: Professional Id: 1607 Build: 14393 BuildLabName: 14393.0.amd64fre.rs1_release.160715-1616 File: C:\Users\mchaves\AppData\Local\Docker\log.txt CommandLine: "C:\Program Files\Docker\Docker\Docker for Windows.exe" You can send feedback, including this log file, at https://github.com/docker/for-win/issues [10:00:02.252][GUI ][Info ] Starting... [10:00:02.658][Tracking ][Info ] Crash report and usage statistics are enabled [10:00:02.674][SegmentApi ][Info ] Usage statistic: appLaunched [10:00:11.479][NamedPipeClient][Info ] Sending Version()... [10:00:11.495][NamedPipeClient][Info ] Received response for Version [10:00:11.495][SegmentApi ][Info ] Usage statistic: heartbeat [10:00:09.643][BackendServer ][Info ] Started [10:00:11.479][NamedPipeServer][Info ] Version() [10:00:11.479][NamedPipeServer][Info ] Version done in 00:00:00. [10:00:11.698][Updater ][Info ] Checking for updates on channel Beta... [10:00:11.698][NamedPipeClient][Info ] Sending Start(Docker.Core.Settings)... [10:00:11.698][NamedPipeServer][Info ] Start(Docker.Core.Settings) [10:00:11.698][PowerMode ][Info ] Stop [10:00:11.713][HyperV ][Info ] Stop [10:00:11.713][PowerShell ][Info ] Run script with parameters: -Stop True... [10:00:11.713][PowerShell ][Info ] Creating a Runspace Pool... [10:00:11.932][PowerShell ][Info ] Runspace Pool created (Min=1, Max=2) [10:00:12.010][HyperV ][Info ] Script started at 10:00:11.995 [10:00:12.780][Updater ][Info ] Local build 9324 is as good as the remote 9324 on channel Beta [10:00:13.919][HyperV ][Info ] Module loaded at 10:00:13.919 [10:00:14.138][HyperV ][Info ] VM MobyLinuxVM is stopped [10:00:14.139][HyperV ][Debug ] [stop] took 00:00:02.4257774 to run [10:00:14.139][OptimizeDisk ][Info ] Optimize [10:00:14.140][PowerShell ][Info ] Run script... [10:00:15.489][Moby ][Info ] Stop [10:00:15.505][HyperVGuids ][Info ] Installing GUIDs... [10:00:15.505][PowerMode ][Info ] Start [10:00:15.506][HyperV ][Info ] Create [10:00:15.507][PowerShell ][Info ] Run script with parameters: -Create True -SwitchSubnetAddress 10.0.75.0 -SwitchSubnetMaskSize 24 -CPUs 2 -Memory 2048 -IsoFile C:\Program Files\Docker\Docker\Resources\mobylinux.iso... [10:00:15.507][HyperVGuids ][Info ] GUIDs installed [10:00:15.514][HyperV ][Info ] Script started at 10:00:15.514 [10:00:15.521][Firewall ][Info ] Opening ports for C:\Program Files\Docker\Docker\Resources\com.docker.proxy.exe... [10:00:15.528][HyperV ][Info ] Module loaded at 10:00:15.527 [10:00:16.064][HyperV ][Info ] Using existing Switch: DockerNAT [10:00:16.426][HyperV ][Info ] Using existing Switch IP address [10:00:17.604][HyperV ][Info ] Setting CPUs to 2 and Memory to 2048 MB [10:00:17.876][Firewall ][Info ] Ports are opened [10:00:17.895][HyperV ][Info ] Connect Internal Switch DockerNAT [10:00:18.260][HyperV ][Info ] VM created. [10:00:18.260][HyperV ][Debug ] [create] took 00:00:02.7544020 to run [10:00:18.260][PowerShell ][Info ] Run script '(Get-VM MobyLinuxVM).Id.Guid'... [10:00:18.285][DataKit ][Info ] Starting C:\Program Files\Docker\Docker\Resources\com.docker.db.exe --url hyperv-connect://6b8fa84b-23fb-4495-a14c-30d116ea7ad1,\.\pipe\dockerDataBase --color never [10:00:18.405][DataKit ][Info ] Started [10:00:18.411][Database ][Info ] Generating CA Cert Bundle [10:00:18.443][Database ][Info ] CA Cert Bundle Generated [10:00:18.449][DataKit ][Info ] Starting com.docker.db.exe 0.7.0-34-g6f04213 ... [10:00:18.473][DataKit ][Info ] com.docker.db.exe: accepted a new connection on \.\pipe\dockerDataBase [10:00:18.475][Database ][Info ] Writing com.docker.driver.amd64-linux/net/config=static [10:00:18.475][Database ][Info ] Writing com.docker.driver.amd64-linux/net/address=10.0.75.2 [10:00:18.475][Database ][Info ] Writing com.docker.driver.amd64-linux/net/netmask=255.255.255.0 [10:00:18.475][Database ][Info ] Writing com.docker.driver.amd64-linux/net/gateway=10.0.75.1 [10:00:18.475][Database ][Info ] Writing com.docker.driver.amd64-linux/network=hybrid [10:00:18.475][Database ][Info ] Writing com.docker.driver.amd64-linux/etc/docker/daemon.json={"registry-mirrors":[],"insecure-registries":[]} [10:00:18.475][Database ][Info ] Writing com.docker.driver.amd64-linux/etc/sysctl.conf= [10:00:18.475][Database ][Info ] Writing com.docker.driver.amd64-linux/native/port-forwarding=true [10:00:18.573][DataKit ][Info ] com.docker.db.exe: accepted a new connection on \.\pipe\dockerDataBase [10:00:18.573][DataKit ][Info ] com.docker.db.exe: Using protocol TwoThousand msize 16384 [10:00:18.948][Database ][Info ] Successfully wrote 8 value(s) [10:00:18.954][Database ][Info ] Writing com.docker.driver.amd64-linux/etc/ssl/certs/ca-certificates.crt=C:\WINDOWS\TEMP\tmpC767.tmp [10:00:18.990][DataKit ][Info ] com.docker.db.exe: accepted a new connection on \.\pipe\dockerDataBase [10:00:18.990][DataKit ][Info ] com.docker.db.exe: Using protocol TwoThousand msize 16384 [10:00:19.083][Database ][Info ] Successfully wrote value [10:00:19.088][Moby ][Info ] Connecting... [10:00:19.088][Moby ][Error ] Failed to read Moby's logs: O tempo limite da operação acabou. [10:00:19.090][HyperV ][Info ] Start [10:00:19.091][PowerShell ][Info ] Run script with parameters: -Start True... [10:00:19.095][PowerShell ][Info ] Run script '$(Find-NetRoute -RemoteIPAddress 8.8.8.8).InterfaceIndex[0]'... [10:00:19.097][HyperV ][Info ] Script started at 10:00:19.097 [10:00:19.148][HyperV ][Info ] Module loaded at 10:00:19.148 [10:00:19.174][HyperV ][Info ] Starting VM MobyLinuxVM... [10:00:19.904][Database ][Info ] Writing com.docker.driver.amd64-linux/slirp/dns=nameserver 172.16.22.6 nameserver 172.16.22.40 search search cit search citdev search ciandt.local [10:00:19.937][DataKit ][Info ] com.docker.db.exe: accepted a new connection on \.\pipe\dockerDataBase [10:00:19.937][DataKit ][Info ] com.docker.db.exe: Using protocol TwoThousand msize 16384 [10:00:20.052][Database ][Info ] Successfully wrote 1 value(s) [10:00:20.093][VpnKit ][Info ] Starting C:\Program Files\Docker\Docker\Resources\com.docker.slirp.exe --ethernet hyperv-connect://6b8fa84b-23fb-4495-a14c-30d116ea7ad1 --port hyperv-connect://6b8fa84b-23fb-4495-a14c-30d116ea7ad1 --db \.\pipe\dockerDataBase --debug --diagnostics \.\pipe\dockerVpnKitDiagnostics [10:00:20.226][VpnKit ][Info ] Started [10:00:21.087][VpnKit ][Info ] com.docker.slirp.exe: Logging to stdout (stdout:true DEBUG:false) [10:00:21.087][VpnKit ][Info ] com.docker.slirp.exe: Setting handler to ignore all SIGPIPE signals [10:00:21.087][VpnKit ][Info ] com.docker.slirp.exe: vpnkit version %VERSION% with hostnet version %HOSTNET_PINNED% uwt version 0.0.3 hvsock version 0.11.2 %HVSOCK_PINNED% [10:00:21.087][VpnKit ][Info ] com.docker.slirp.exe: starting port forwarding server on port_control_url:hyperv-connect://6b8fa84b-23fb-4495-a14c-30d116ea7ad1 vsock_path: [10:00:21.087][VpnKit ][Info ] com.docker.slirp.exe: connecting to 6b8fa84b-23fb-4495-a14c-30d116ea7ad1:0B95756A-9985-48AD-9470-78E060895BE7 [10:00:21.087][VpnKit ][Info ] com.docker.slirp.exe: connecting to 6b8fa84b-23fb-4495-a14c-30d116ea7ad1:30D48B34-7D27-4B0B-AAAF-BBBED334DD59 [10:00:21.087][VpnKit ][Error ] com.docker.slirp.exe: While watching /etc/resolv.conf: ENOENT [10:00:21.088][VpnKit ][Info ] com.docker.slirp.exe: hosts file has bindings for [10:00:21.201][HyperV ][Debug ] [start] took 00:00:02.1109578 to run [10:00:21.201][Moby ][Info ] Connected [10:00:21.201][Linux ][Info ] Trying to connect to vsud... [10:00:21.431][Moby ][Info ] early console in extract_kernel [10:00:21.431][Moby ][Info ] input_data: 0x0000000001ec83b4 [10:00:21.432][Moby ][Info ] input_len: 0x0000000000604f7f [10:00:21.432][Moby ][Info ] output: 0x0000000001000000 [10:00:21.433][Moby ][Info ] output_len: 0x00000000014bb910 [10:00:21.434][Moby ][Info ] kernel_total_size: 0x0000000001175000 [10:00:21.434][Moby ][Info ] [10:00:21.803][Moby ][Info ] Decompressing Linux... Parsing ELF... done. [10:00:21.803][Moby ][Info ] Booting the kernel. [10:00:21.807][Moby ][Info ] Linux version 4.8.12-moby (root@1d811a9194c4) (gcc version 5.3.0 (Alpine 5.3.0) ) #1 SMP Tue Dec 6 05:03:18 UTC 2016 [10:00:21.810][Moby ][Info ] Command line: earlyprintk=ttyS0,115200 console=ttyS0,115200 mobyplatform=windows rootdelay=300 noautodetect [10:00:21.810][Moby ][Info ] [10:00:21.812][Moby ][Info ] ------------[ cut here ]------------ [10:00:21.814][Moby ][Info ] WARNING: CPU: 0 PID: 0 at arch/x86/kernel/fpu/xstate.c:590 fpu__init_system_xstate+0x393/0x8cb [10:00:21.816][Moby ][Info ] XSAVE consistency problem, dumping leaves [10:00:21.819][Moby ][Info ] Modules linked in: [10:00:21.820][Moby ][Info ] CPU: 0 PID: 0 Comm: swapper Not tainted 4.8.12-moby #1 [10:00:21.822][Moby ][Info ] 0000000000000086 58567a8b58567a8b ffffffff8141bb51 ffffffff81e03e18 [10:00:21.824][Moby ][Info ] 0000000000000000 ffffffff810e0362 000000000000000a ffffffff81e03e78 [10:00:21.826][Moby ][Info ] 00000000000003c0 0000000000000440 0000000000000001 000000000419a1f0 [10:00:21.827][Moby ][Info ] Call Trace: [10:00:21.829][Moby ][Info ] [] ? dump_stack+0x5a/0x6f [10:00:21.831][Moby ][Info ] [] ? warn+0xd2/0xeb [10:00:21.833][Moby ][Info ] [] ? warn_slowpath_fmt+0x5a/0x76 [10:00:21.835][Moby ][Info ] [] ? cpuid.constprop.11+0x7/0x8 [10:00:21.837][Moby ][Info ] [] ? fpuinit_system_xstate+0x393/0x8cb [10:00:21.839][Moby ][Info ] [] ? fpuinit_system+0x204/0x31e [10:00:21.841][Moby ][Info ] [] ? setup_arch+0xb2/0xc07 [10:00:21.843][Moby ][Info ] [] ? setup_arch+0xb2/0xc07 [10:00:21.844][Moby ][Info ] [] ? start_kernel+0xa9/0x440 [10:00:21.847][Moby ][Info ] [] ? early_idt_handler_array+0x120/0x120 [10:00:21.849][Moby ][Info ] [] ? x86_64_start_kernel+0x13f/0x161 [10:00:21.850][Moby ][Info ] ---[ end trace 49a2591fb0e50f79 ]--- [10:00:21.852][Moby ][Info ] CPUID[0d, 00]: eax=0000001f ebx=00000440 ecx=00000440 edx=00000000 [10:00:21.855][Moby ][Info ] CPUID[0d, 01]: eax=0000000b ebx=00000000 ecx=00000000 edx=00000000 [10:00:21.856][Moby ][Info ] CPUID[0d, 02]: eax=00000100 ebx=00000240 ecx=00000000 edx=00000000 [10:00:21.856][Moby ][Info ] CPUID[0d, 03]: eax=00000040 ebx=000003c0 ecx=00000000 edx=00000000 [10:00:21.857][Moby ][Info ] CPUID[0d, 04]: eax=00000040 ebx=00000400 ecx=00000000 edx=00000000 [10:00:21.857][Moby ][Info ] CPUID[0d, 05]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:00:21.858][Moby ][Info ] CPUID[0d, 06]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:00:21.862][Moby ][Info ] CPUID[0d, 07]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:00:21.871][Moby ][Info ] CPUID[0d, 08]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:00:21.871][Moby ][Info ] CPUID[0d, 09]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:00:21.871][Moby ][Info ] CPUID[0d, 0a]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:00:21.871][Moby ][Info ] CPUID[0d, 0b]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:00:21.871][Moby ][Info ] CPUID[0d, 0c]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:00:21.871][Moby ][Info ] CPUID[0d, 0d]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:00:21.871][Moby ][Info ] CPUID[0d, 0e]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:00:21.872][Moby ][Info ] CPUID[0d, 0f]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:00:21.875][Moby ][Info ] CPUID[0d, 10]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:00:21.878][Moby ][Info ] CPUID[0d, 11]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:00:21.881][Moby ][Info ] CPUID[0d, 12]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:00:21.883][Moby ][Info ] CPUID[0d, 13]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:00:21.885][Moby ][Info ] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [10:00:21.887][Moby ][Info ] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [10:00:21.888][Moby ][Info ] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [10:00:21.890][Moby ][Info ] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [10:00:21.892][Moby ][Info ] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'

[10:00:21.899][Moby ][Info ] x86/fpu: Enabled xstate features 0x1f, context size is 0 bytes, using 'compacted' format. [10:00:21.901][Moby ][Info ] x86/fpu: Using 'eager' FPU context switches. [10:00:21.902][Moby ][Info ] e820: BIOS-provided physical RAM map: [10:00:21.904][Moby ][Info ] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [10:00:21.906][Moby ][Info ] BIOS-e820: [mem 0x0000000000100000-0x000000007eeedfff] usable [10:00:21.908][Moby ][Info ] BIOS-e820: [mem 0x000000007eeee000-0x000000007eef1fff] ACPI data [10:00:21.909][Moby ][Info ] BIOS-e820: [mem 0x000000007eef2000-0x000000007ef1afff] reserved [10:00:21.911][Moby ][Info ] BIOS-e820: [mem 0x000000007ef1b000-0x000000007ff9afff] usable [10:00:21.913][Moby ][Info ] BIOS-e820: [mem 0x000000007ff9b000-0x000000007fff2fff] reserved [10:00:21.915][Moby ][Info ] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffafff] ACPI data [10:00:21.916][Moby ][Info ] BIOS-e820: [mem 0x000000007fffb000-0x000000007fffefff] ACPI NVS [10:00:21.918][Moby ][Info ] BIOS-e820: [mem 0x000000007ffff000-0x000000007fffffff] usable [10:00:21.919][Moby ][Info ] bootconsole [earlyser0] enabled [10:00:21.926][Moby ][Info ] NX (Execute Disable) protection: active [10:00:21.926][Moby ][Info ] efi: EFI v2.31 by EDK II [10:00:21.926][Moby ][Info ] efi: ACPI=0x7fffa000 ACPI 2.0=0x7fffa014 SMBIOS=0x7fff2000 PROP=0x419a3d8 MEMATTR=0x7f527d18 [10:00:21.926][Moby ][Info ] SMBIOS 2.4 present. [10:00:21.926][Moby ][Info ] Hypervisor detected: Microsoft HyperV [10:00:21.926][Moby ][Info ] HyperV: features 0x2e7f, hints 0x2c2c [10:00:21.926][Moby ][Info ] HyperV: LAPIC Timer Frequency: 0x1e8480 [10:00:21.926][Moby ][Info ] clocksource: hyperv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns [10:00:21.926][Moby ][Info ] tsc: Marking TSC unstable due to running on Hyper-V [10:00:21.928][Moby ][Info ] e820: last_pfn = 0x80000 max_arch_pfn = 0x400000000 [10:00:21.932][Moby ][Info ] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[10:00:21.934][Moby ][Info ] Using GB pages for direct mapping [10:00:21.936][Moby ][Info ] RAMDISK: [mem 0x77858000-0x7b093fff] [10:00:21.939][Moby ][Info ] ACPI: Early table checksum verification disabled [10:00:21.941][Moby ][Info ] ACPI: RSDP 0x000000007FFFA014 000024 (v02 VRTUAL) [10:00:21.946][Moby ][Info ] ACPI: XSDT 0x000000007FFF90E8 00005C (v01 VRTUAL MICROSFT 00000001 MSFT 00000001) [10:00:21.949][Moby ][Info ] ACPI: FACP 0x000000007FFF7000 0000F4 (v04 VRTUAL MICROSFT 00000001 MSFT 00000001) [10:00:21.958][Moby ][Info ] ACPI: DSDT 0x000000007EEEF000 00256F (v02 MSFTVM DSDT01 00000001 MSFT 04000000) [10:00:21.958][Moby ][Info ] ACPI: FACS 0x000000007FFFE000 000040 [10:00:21.958][Moby ][Info ] ACPI: APIC 0x000000007FFF8000 0007D2 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001) [10:00:21.958][Moby ][Info ] ACPI: OEM0 0x000000007FFF6000 000064 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001) [10:00:21.958][Moby ][Info ] ACPI: WAET 0x000000007FFF5000 000028 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001) [10:00:21.960][Moby ][Info ] ACPI: OEM1 0x000000007FFF4000 00009E (v02 MSFTVM UARTS 00000001 MSFT 04000000) [10:00:21.964][Moby ][Info ] ACPI: OEM2 0x000000007FFF3000 0002E2 (v02 MSFTVM VTPM2 00000001 MSFT 04000000) [10:00:21.966][Moby ][Info ] ACPI: SRAT 0x000000007EEEE000 000190 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001) [10:00:21.981][Moby ][Info ] Zone ranges: [10:00:21.982][Moby ][Info ] DMA [mem 0x0000000000001000-0x0000000000ffffff] [10:00:21.985][Moby ][Info ] DMA32 [mem 0x0000000001000000-0x000000007fffffff] [10:00:21.986][Moby ][Info ] Normal empty [10:00:21.987][Moby ][Info ] Movable zone start for each node [10:00:21.988][Moby ][Info ] Early memory node ranges [10:00:21.991][Moby ][Info ] node 0: [mem 0x0000000000001000-0x000000000009ffff] [10:00:21.992][Moby ][Info ] node 0: [mem 0x0000000000100000-0x000000007eeedfff] [10:00:21.998][Moby ][Info ] node 0: [mem 0x000000007ef1b000-0x000000007ff9afff] [10:00:21.998][Moby ][Info ] node 0: [mem 0x000000007ffff000-0x000000007fffffff] [10:00:21.998][Moby ][Info ] Initmem setup node 0 [mem 0x0000000000001000-0x000000007fffffff] [10:00:22.002][Moby ][Info ] ACPI: PM-Timer IO Port: 0x408 [10:00:22.003][Moby ][Info ] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [10:00:22.004][Moby ][Info ] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [10:00:22.005][Moby ][Info ] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [10:00:22.008][Moby ][Info ] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [10:00:22.010][Moby ][Info ] Using ACPI (MADT) for SMP configuration information [10:00:22.012][Moby ][Info ] smpboot: 240 Processors exceeds NR_CPUS limit of 128 [10:00:22.014][Moby ][Info ] smpboot: Allowing 128 CPUs, 126 hotplug CPUs [10:00:22.017][Moby ][Info ] e820: [mem 0x80000000-0xffffffff] available for PCI devices [10:00:22.019][Moby ][Info ] Booting paravirtualized kernel on bare hardware [10:00:22.022][Moby ][Info ] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [10:00:22.026][Moby ][Info ] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:128 nr_node_ids:1 [10:00:22.032][Moby ][Info ] percpu: Embedded 35 pages/cpu @ffff880075800000 s105048 r8192 d30120 u262144 [10:00:22.034][Moby ][Info ] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515799 [10:00:22.037][Moby ][Info ] Kernel command line: earlyprintk=ttyS0,115200 console=ttyS0,115200 mobyplatform=windows rootdelay=300 noautodetect [10:00:22.037][Moby ][Info ] [10:00:22.040][Moby ][Info ] log_buf_len individual max cpu contribution: 4096 bytes [10:00:22.041][Moby ][Info ] log_buf_len total cpu_extra contributions: 520192 bytes [10:00:22.042][Moby ][Info ] log_buf_len min size: 131072 bytes [10:00:22.044][Moby ][Info ] log_buf_len: 1048576 bytes [10:00:22.045][Moby ][Info ] early log buf free: 119388(91%) [10:00:22.047][Moby ][Info ] PID hash table entries: 4096 (order: 3, 32768 bytes) [10:00:22.048][Moby ][Info ] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [10:00:22.050][Moby ][Info ] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [10:00:22.059][Moby ][Info ] Memory: 1950528K/2096184K available (8442K kernel code, 1394K rwdata, 2848K rodata, 1372K init, 588K bss, 145656K reserved, 0K cma-reserved) [10:00:22.061][Moby ][Info ] Hierarchical RCU implementation. [10:00:22.063][Moby ][Info ] Build-time adjustment of leaf fanout to 64. [10:00:22.065][Moby ][Info ] Using NULL legacy PIC [10:00:22.067][Moby ][Info ] NR_IRQS:8448 nr_irqs:1448 0 [10:00:22.069][Moby ][Info ] Console: colour dummy device 80x25 [10:00:22.072][Moby ][Info ] console [ttyS0] enabled [10:00:22.073][Moby ][Info ] console [ttyS0] enabled [10:00:22.074][Moby ][Info ] bootconsole [earlyser0] disabled [10:00:22.075][Moby ][Info ] bootconsole [earlyser0] disabled [10:00:22.111][Moby ][Info ] tsc: Fast TSC calibration failed [10:00:22.113][Moby ][Info ] tsc: Unable to calibrate against PIT [10:00:22.116][Moby ][Info ] tsc: using PMTIMER reference calibration [10:00:22.119][Moby ][Info ] tsc: Detected 2367.711 MHz processor [10:00:22.123][Moby ][Info ] Calibrating delay loop (skipped), value calculated using timer frequency.. 4735.42 BogoMIPS (lpj=23677110) [10:00:22.126][Moby ][Info ] pid_max: default: 131072 minimum: 1024 [10:00:22.130][Moby ][Info ] ACPI: Core revision 20160422 [10:00:22.135][Moby ][Info ] ACPI: 1 ACPI AML tables successfully acquired and loaded [10:00:22.138][Moby ][Info ] [10:00:22.142][Moby ][Info ] Security Framework initialized [10:00:22.144][Moby ][Info ] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [10:00:22.147][Moby ][Info ] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [10:00:22.149][Moby ][Info ] CPU: Physical Processor ID: 0 [10:00:22.151][Moby ][Info ] CPU: Processor Core ID: 0 [10:00:22.153][Moby ][Info ] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [10:00:22.155][Moby ][Info ] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [10:00:22.158][Moby ][Info ] Freeing SMP alternatives memory: 24K (ffffffff820b5000 - ffffffff820bb000) [10:00:22.162][Moby ][Info ] ftrace: allocating 37214 entries in 146 pages [10:00:22.210][Moby ][Info ] smpboot: APIC(0) Converting physical 0 to logical package 0 [10:00:22.225][Moby ][Info ] smpboot: Max logical packages: 120 [10:00:22.245][Moby ][Info ] Switched APIC routing to physical flat. [10:00:22.291][Moby ][Info ] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3) [10:00:22.329][Moby ][Info ] Performance Events: unsupported p6 CPU model 78 no PMU driver, software events only. [10:00:22.356][Moby ][Info ] NMI watchdog: disabled (cpu0): hardware events not enabled [10:00:22.383][Moby ][Info ] NMI watchdog: Shutting down hard lockup detector on all cpus [10:00:22.399][Moby ][Info ] x86: Booting SMP configuration: [10:00:22.557][Moby ][Info ] .... node #0, CPUs: #1 [10:00:22.572][Moby ][Info ] x86: Booted up 1 node, 2 CPUs [10:00:22.598][Moby ][Info ] smpboot: Total of 2 processors activated (9494.51 BogoMIPS) [10:00:22.611][Moby ][Info ] devtmpfs: initialized [10:00:22.622][Moby ][Info ] x86/mm: Memory block size: 128MB [10:00:22.656][Moby ][Info ] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [10:00:22.666][Moby ][Info ] NET: Registered protocol family 16 [10:00:22.714][Moby ][Info ] cpuidle: using governor ladder [10:00:22.754][Moby ][Info ] cpuidle: using governor menu [10:00:22.769][Moby ][Info ] ACPI: bus type PCI registered [10:00:22.791][Moby ][Info ] PCI: Fatal: No config space access function found [10:00:22.850][Moby ][Info ] HugeTLB registered 1 GB page size, pre-allocated 0 pages [10:00:22.864][Moby ][Info ] HugeTLB registered 2 MB page size, pre-allocated 0 pages [10:00:22.875][Moby ][Info ] ACPI: Added _OSI(Module Device) [10:00:22.884][Moby ][Info ] ACPI: Added _OSI(Processor Device) [10:00:22.895][Moby ][Info ] ACPI: Added _OSI(3.0 _SCP Extensions) [10:00:22.907][Moby ][Info ] ACPI: Added _OSI(Processor Aggregator Device) [10:00:22.924][Moby ][Info ] ACPI: Executed 1 blocks of module-level executable AML code [10:00:22.934][Moby ][Info ] ACPI: Dynamic OEM Table Load: [10:00:22.956][Moby ][Info ] ACPI: OEM1 0x0000000000000000 00009E (v02 MSFTVM UARTS 00000001 MSFT 04000000) [10:00:22.964][Moby ][Info ] ACPI: Interpreter enabled [10:00:22.971][Moby ][Info ] ACPI: (supports S0 S5) [10:00:22.982][Moby ][Info ] ACPI: Using IOAPIC for interrupt routing [10:00:23.003][Moby ][Info ] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [10:00:23.026][Moby ][Info ] ACPI: Enabled 1 GPEs in block 00 to 0F [10:00:23.032][Moby ][Info ] SCSI subsystem initialized [10:00:23.049][Moby ][Info ] pps_core: LinuxPPS API ver. 1 registered [10:00:23.089][Moby ][Info ] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [10:00:23.102][Moby ][Info ] PTP clock support registered [10:00:23.110][Moby ][Info ] wmi: Mapper loaded [10:00:23.135][Moby ][Info ] clocksource: hyperv_clocksource_tsc_page: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns [10:00:23.151][Moby ][Info ] hv_vmbus: Hyper-V Host Build:14393-10.0-0-0.0; Vmbus version:4.0 [10:00:23.170][Moby ][Info ] PCI: Using ACPI for IRQ routing [10:00:23.183][Moby ][Info ] PCI: System does not support PCI [10:00:23.190][Moby ][Info ] NetLabel: Initializing [10:00:23.199][Moby ][Info ] NetLabel: domain hash size = 128 [10:00:23.209][Moby ][Info ] NetLabel: protocols = UNLABELED CIPSOv4 [10:00:23.220][Moby ][Info ] NetLabel: unlabeled traffic allowed by default [10:00:23.237][Moby ][Info ] clocksource: Switched to clocksource hyperv_clocksource_tsc_page [10:00:23.251][Moby ][Info ] FS-Cache: Loaded [10:00:23.258][Moby ][Info ] CacheFiles: Loaded [10:00:23.264][Moby ][Info ] pnp: PnP ACPI init [10:00:23.272][Moby ][Info ] pnp: PnP ACPI: found 3 devices [10:00:23.301][Moby ][Info ] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [10:00:23.312][Moby ][Info ] NET: Registered protocol family 2 [10:00:23.329][Moby ][Info ] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [10:00:23.345][Moby ][Info ] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [10:00:23.358][Moby ][Info ] TCP: Hash tables configured (established 16384 bind 16384) [10:00:23.370][Moby ][Info ] UDP hash table entries: 1024 (order: 3, 32768 bytes) [10:00:23.382][Moby ][Info ] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [10:00:23.391][Moby ][Info ] NET: Registered protocol family 1 [10:00:23.407][Moby ][Info ] RPC: Registered named UNIX socket transport module. [10:00:23.416][Moby ][Info ] RPC: Registered udp transport module. [10:00:23.425][Moby ][Info ] RPC: Registered tcp transport module. [10:00:23.441][Moby ][Info ] RPC: Registered tcp NFSv4.1 backchannel transport module. [10:00:23.447][Moby ][Info ] Unpacking initramfs... [10:00:24.323][Moby ][Info ] Freeing initrd memory: 57584K (ffff880077858000 - ffff88007b094000) [10:00:24.344][Moby ][Info ] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 10737418240 ms ovfl timer [10:00:24.357][Moby ][Info ] RAPL PMU: hw unit of domain pp0-core 2^-0 Joules [10:00:24.369][Moby ][Info ] RAPL PMU: hw unit of domain package 2^-0 Joules [10:00:24.382][Moby ][Info ] RAPL PMU: hw unit of domain dram 2^-0 Joules [10:00:24.396][Moby ][Info ] RAPL PMU: hw unit of domain pp1-gpu 2^-0 Joules [10:00:24.407][Moby ][Info ] RAPL PMU: hw unit of domain psys 2^-0 Joules [10:00:24.429][Moby ][Info ] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22211119995, max_idle_ns: 440795224795 ns [10:00:24.455][Moby ][Info ] futex hash table entries: 32768 (order: 9, 2097152 bytes) [10:00:24.467][Moby ][Info ] audit: initializing netlink subsys (disabled) [10:00:24.480][Moby ][Info ] audit: type=2000 audit(1481709621.960:1): initialized [10:00:24.495][Moby ][Info ] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [10:00:24.507][Moby ][Info ] FS-Cache: Netfs 'nfs' registered for caching [10:00:24.518][Moby ][Info ] NFS: Registering the id_resolver key type [10:00:24.527][Moby ][Info ] Key type id_resolver registered [10:00:24.539][Moby ][Info ] Key type id_legacy registered [10:00:24.553][Moby ][Info ] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [10:00:24.567][Moby ][Info ] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [10:00:24.580][Moby ][Info ] FS-Cache: Netfs 'cifs' registered for caching [10:00:24.589][Moby ][Info ] ntfs: driver 2.1.32 [Flags: R/O]. [10:00:24.596][Moby ][Info ] fuse init (API version 7.25) [10:00:24.608][Moby ][Info ] 9p: Installing v9fs 9p2000 file system support [10:00:24.620][Moby ][Info ] FS-Cache: Netfs '9p' registered for caching [10:00:24.625][Moby ][Info ] aufs 4.8-20161010 [10:00:24.639][Moby ][Info ] NET: Registered protocol family 38 [10:00:24.646][Moby ][Info ] Key type asymmetric registered [10:00:24.657][Moby ][Info ] Asymmetric key parser 'x509' registered [10:00:24.671][Moby ][Info ] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [10:00:24.679][Moby ][Info ] io scheduler noop registered [10:00:24.689][Moby ][Info ] io scheduler deadline registered (default) [10:00:24.696][Moby ][Info ] io scheduler cfq registered [10:00:24.710][Moby ][Info ] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [10:00:24.727][Moby ][Info ] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [10:00:24.741][Moby ][Info ] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [10:00:24.752][Moby ][Info ] hv_vmbus: registering driver hyperv_fb [10:00:24.761][Moby ][Info ] GHES: HEST is not enabled! [10:00:24.779][Moby ][Info ] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [10:00:24.896][Moby ][Info ] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [10:00:24.990][Moby ][Info ] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [10:00:24.999][Moby ][Info ] Initializing Nozomi driver 2.1d [10:00:25.008][Moby ][Info ] Non-volatile memory driver v1.3 [10:00:25.029][Moby ][Info ] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [10:00:25.037][Moby ][Info ] loop: module loaded [10:00:25.048][Moby ][Info ] nbd: registered device at major 43 [10:00:25.060][Moby ][Info ] VMware PVSCSI driver - version 1.0.6.0-k [10:00:25.071][Moby ][Info ] hv_vmbus: registering driver hv_storvsc [10:00:25.117][Moby ][Info ] random: fast init done [10:00:25.124][Moby ][Info ] scsi host0: storvsc_host_t [10:00:25.142][Moby ][Info ] scsi 0:0:0:0: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 5 [10:00:25.206][Moby ][Info ] scsi 0:0:0:1: CD-ROM Msft Virtual DVD-ROM 1.0 PQ: 0 ANSI: 0 [10:00:25.233][Moby ][Info ] sd 0:0:0:0: [sda] 125829120 512-byte logical blocks: (64.4 GB/60.0 GiB) [10:00:25.250][Moby ][Info ] sr 0:0:0:1: [sr0] scsi3-mmc drive: 0x/0x caddy [10:00:25.265][Moby ][Info ] cdrom: Uniform CD-ROM driver Revision: 3.20 [10:00:25.283][Moby ][Info ] sd 0:0:0:0: Attached scsi generic sg0 type 0 [10:00:25.299][Moby ][Info ] sr 0:0:0:1: Attached scsi generic sg1 type 5 [10:00:25.319][Moby ][Info ] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [10:00:25.333][Moby ][Info ] tun: Universal TUN/TAP device driver, 1.6 [10:00:25.351][Moby ][Info ] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com [10:00:25.373][Moby ][Info ] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [10:00:25.387][Moby ][Info ] e1000: Copyright (c) 1999-2006 Intel Corporation. [10:00:25.400][Moby ][Info ] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [10:00:25.415][Moby ][Info ] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [10:00:25.437][Moby ][Info ] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 3.2.2-k [10:00:25.450][Moby ][Info ] ixgbevf: Copyright (c) 2009 - 2015 Intel Corporation. [10:00:25.460][Moby ][Info ] PPP generic driver version 2.4.2 [10:00:25.471][Moby ][Info ] PPP BSD Compression module registered [10:00:25.483][Moby ][Info ] PPP Deflate Compression module registered [10:00:25.495][Moby ][Info ] PPP MPPE Compression module registered [10:00:25.505][Moby ][Info ] NET: Registered protocol family 24 [10:00:25.512][Moby ][Info ] PPTP driver version 0.8.5 [10:00:25.529][Moby ][Info ] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI [10:00:25.542][Moby ][Info ] hv_vmbus: registering driver hv_netvsc [10:00:25.554][Moby ][Info ] hv_netvsc: hv_netvsc channel opened successfully [10:00:25.566][Moby ][Info ] sd 0:0:0:0: [sda] 4096-byte physical blocks [10:00:25.580][Moby ][Info ] sd 0:0:0:0: [sda] Write Protect is off [10:00:25.604][Moby ][Info ] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [10:00:25.617][Moby ][Info ] sd 0:0:0:0: [sda] Attached SCSI disk [10:00:25.846][Moby ][Info ] hv_netvsc vmbus_5: Send section size: 6144, Section count:2560 [10:00:25.871][Moby ][Info ] hv_netvsc vmbus_5: Device MAC 00:15:5d:4b:01:13 link state up [10:00:25.885][Moby ][Info ] Fusion MPT base driver 3.04.20 [10:00:25.895][Moby ][Info ] Copyright (c) 1999-2008 LSI Corporation [10:00:25.908][Moby ][Info ] Fusion MPT SPI Host driver 3.04.20 [10:00:25.916][Moby ][Info ] aoe: AoE v85 initialised. [10:00:25.933][Moby ][Info ] i8042: PNP: No PS/2 controller found. Probing ports directly. [10:00:26.972][Moby ][Info ] i8042: No controller found [10:00:26.989][Moby ][Info ] hv_vmbus: registering driver hyperv_keyboard [10:00:27.005][Moby ][Info ] mousedev: PS/2 mouse device common for all mice [10:00:27.020][Moby ][Info ] input: PC Speaker as /devices/platform/pcspkr/input/input0 [10:00:27.031][Moby ][Info ] rtc_cmos 00:00: RTC can wake from S4 [10:00:27.066][Moby ][Info ] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [10:00:27.082][Moby ][Info ] rtc_cmos 00:00: alarms up to one month, 114 bytes nvram [10:00:27.089][Moby ][Info ] i2c /dev entries driver [10:00:27.099][Moby ][Info ] EFI Variables Facility v0.08 2004-May-17 [10:00:27.111][Moby ][Info ] pstore: using zlib compression [10:00:27.128][Moby ][Info ] pstore: Registered efi as persistent store backend [10:00:27.142][Moby ][Info ] hv_utils: Registering HyperV Utility Driver [10:00:27.155][Moby ][Info ] hv_vmbus: registering driver hv_util [10:00:27.166][Moby ][Info ] oprofile: using timer interrupt. [10:00:27.172][Moby ][Info ] GACT probability on [10:00:27.182][Moby ][Info ] Mirror/redirect action on [10:00:27.190][Moby ][Info ] Simple TC action Loaded [10:00:27.198][Moby ][Info ] netem: version 1.3 [10:00:27.204][Moby ][Info ] u32 classifier [10:00:27.213][Moby ][Info ] Performance counters on [10:00:27.233][Moby ][Info ] input device check on [10:00:27.247][Moby ][Info ] Actions configured [10:00:27.258][Moby ][Info ] Netfilter messages via NETLINK v0.30. [10:00:27.268][Moby ][Info ] nfnl_acct: registering with nfnetlink. [10:00:27.280][Moby ][Info ] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [10:00:27.294][Moby ][Info ] ctnetlink v0.93: registering with nfnetlink. [10:00:27.314][Moby ][Info ] nf_tables: (c) 2007-2009 Patrick McHardy kaber@trash.net [10:00:27.340][Moby ][Info ] nf_tables_compat: (c) 2012 Pablo Neira Ayuso pablo@netfilter.org [10:00:27.352][Moby ][Info ] xt_time: kernel timezone is -0000 [10:00:27.363][Moby ][Info ] ip_set: protocol 6 [10:00:27.377][Moby ][Info ] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP) [10:00:27.401][Moby ][Info ] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [10:00:27.410][Moby ][Info ] IPVS: Creating netns size=2104 id=0 [10:00:27.421][Moby ][Info ] IPVS: ipvs loaded. [10:00:27.430][Moby ][Info ] IPVS: [rr] scheduler registered. [10:00:27.444][Moby ][Info ] IPVS: [wrr] scheduler registered. [10:00:27.459][Moby ][Info ] IPVS: [lc] scheduler registered. [10:00:27.468][Moby ][Info ] IPVS: [wlc] scheduler registered. [10:00:27.482][Moby ][Info ] IPVS: [fo] scheduler registered. [10:00:27.492][Moby ][Info ] IPVS: [ovf] scheduler registered. [10:00:27.502][Moby ][Info ] IPVS: [lblc] scheduler registered. [10:00:27.511][Moby ][Info ] IPVS: [lblcr] scheduler registered. [10:00:27.521][Moby ][Info ] IPVS: [dh] scheduler registered. [10:00:27.531][Moby ][Info ] IPVS: [sh] scheduler registered. [10:00:27.541][Moby ][Info ] IPVS: [sed] scheduler registered. [10:00:27.550][Moby ][Info ] IPVS: [nq] scheduler registered. [10:00:27.561][Moby ][Info ] IPVS: ftp: loaded support on port[0] = 21 [10:00:27.574][Moby ][Info ] ipip: IPv4 and MPLS over IPv4 tunneling driver [10:00:27.585][Moby ][Info ] gre: GRE over IPv4 demultiplexor driver [10:00:27.595][Moby ][Info ] ip_gre: GRE over IPv4 tunneling driver [10:00:27.605][Moby ][Info ] IPv4 over IPsec tunneling driver [10:00:27.618][Moby ][Info ] ip_tables: (C) 2000-2006 Netfilter Core Team [10:00:27.634][Moby ][Info ] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [10:00:27.647][Moby ][Info ] arp_tables: arp_tables: (C) 2002 David S. Miller [10:00:27.656][Moby ][Info ] Initializing XFRM netlink socket [10:00:27.667][Moby ][Info ] NET: Registered protocol family 10 [10:00:27.674][Moby ][Info ] mip6: Mobile IPv6 [10:00:27.687][Moby ][Info ] ip6_tables: (C) 2000-2006 Netfilter Core Team [10:00:27.702][Moby ][Info ] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [10:00:27.713][Moby ][Info ] ip6_gre: GRE over IPv6 tunneling driver [10:00:27.725][Moby ][Info ] NET: Registered protocol family 17 [10:00:27.735][Moby ][Info ] NET: Registered protocol family 15 [10:00:27.766][Moby ][Info ] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [10:00:27.775][Moby ][Info ] Bridge firewalling registered [10:00:27.783][Moby ][Info ] Ebtables v2.0 registered [10:00:27.794][Moby ][Info ] l2tp_core: L2TP core driver, V2.0 [10:00:27.806][Moby ][Info ] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [10:00:27.815][Moby ][Info ] 8021q: 802.1Q VLAN Support v1.8 [10:00:27.824][Moby ][Info ] 9pnet: Installing 9P2000 support [10:00:27.833][Moby ][Info ] Key type dns_resolver registered [10:00:27.846][Moby ][Info ] openvswitch: Open vSwitch switching datapath [10:00:27.857][Moby ][Info ] hv_vmbus: registering driver hv_sock [10:00:27.867][Moby ][Info ] NET: Registered protocol family 43 [10:00:27.876][Moby ][Info ] mpls_gso: MPLS GSO support [10:00:27.889][Moby ][Info ] microcode: sig=0x406e3, pf=0x1, revision=0xffffffff [10:00:27.911][Moby ][Info ] microcode: Microcode Update Driver: v2.01 tigran@aivazian.fsnet.co.uk, Peter Oruba [10:00:27.923][Moby ][Info ] AVX2 version of gcm_enc/dec engaged. [10:00:27.935][Moby ][Info ] AES CTR mode by8 optimization enabled [10:00:27.945][Moby ][Info ] registered taskstats version 1 [10:00:27.956][Moby ][Info ] Key type big_key registered [10:00:27.968][Moby ][Info ] Key type encrypted registered [10:00:27.987][Moby ][Info ] rtc_cmos 00:00: setting system clock to 2016-12-14 10:00:26 UTC (1481709626) [10:00:28.010][Moby ][Info ] Freeing unused kernel memory: 1372K (ffffffff81f5e000 - ffffffff820b5000) [10:00:28.023][Moby ][Info ] Write protecting the kernel read-only data: 14336k [10:00:28.040][Moby ][Info ] Freeing unused kernel memory: 1784K (ffff880001842000 - ffff880001a00000) [10:00:28.071][Moby ][Info ] Freeing unused kernel memory: 1248K (ffff880001cc8000 - ffff880001e00000) [10:00:28.082][Moby ][Info ] ------------[ cut here ]------------ [10:00:28.104][Moby ][Info ] WARNING: CPU: 0 PID: 321 at ./arch/x86/include/asm/fpu/internal.h:368 switch_to+0x2de/0x4b0 [10:00:28.110][Moby ][Info ] Modules linked in: [10:00:28.124][Moby ][Info ] CPU: 0 PID: 321 Comm: mount Tainted: G W 4.8.12-moby #1 [10:00:28.151][Moby ][Info ] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012 [10:00:28.170][Moby ][Info ] 0000000000000086 000000002c3c3dc0 ffffffff8141bb51 0000000000000000 [10:00:28.188][Moby ][Info ] 0000000000000000 ffffffff810e0362 ffff88007c6b3240 ffff880070275500 [10:00:28.207][Moby ][Info ] 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [10:00:28.212][Moby ][Info ] Call Trace: [10:00:28.216][Moby ][Info ] [10:00:28.226][Moby ][Info ] ---[ end trace 49a2591fb0e50f7b ]--- [10:00:28.355][Moby ][Info ] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [10:00:28.369][Moby ][Info ] IP: [] check_preempt_wakeup+0x32/0x1a7 [10:00:28.373][Moby ][Info ] PGD 0 [10:00:28.379][Moby ][Info ] Oops: 0000 [#1] SMP [10:00:28.386][Moby ][Info ] Modules linked in: [10:00:28.403][Moby ][Info ] CPU: 0 PID: 328 Comm: init-early.sh Tainted: G W 4.8.12-moby #1 [10:00:28.429][Moby ][Info ] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012 [10:00:28.444][Moby ][Info ] task: ffff8800700caa00 task.stack: ffff88006e138000 [10:00:28.468][Moby ][Info ] RIP: 0010:[] [] check_preempt_wakeup+0x32/0x1a7 [10:00:28.481][Moby ][Info ] RSP: 0018:ffff88006e13bbb8 EFLAGS: 00010006 [10:00:28.504][Moby ][Info ] RAX: 0000000000000000 RBX: ffff8800700caa80 RCX: ffffffff81a15f60 [10:00:28.526][Moby ][Info ] RDX: 0000000000000001 RSI: ffff8800700ca100 RDI: ffff8800758188c0 [10:00:28.547][Moby ][Info ] RBP: ffff8800700caa00 R08: 0000000000013800 R09: ffff88006e048a00 [10:00:28.568][Moby ][Info ] R10: ffff88006e13bb80 R11: 0000000000000001 R12: ffff8800700ca100 [10:00:28.592][Moby ][Info ] R13: 0000000000000000 R14: ffff8800700ca180 R15: ffff8800700ca100 [10:00:28.613][Moby ][Info ] FS: 0000000000000000(0000) GS:ffff880075800000(0000) knlGS:0000000000000000 [10:00:28.627][Moby ][Info ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10:00:28.644][Moby ][Info ] CR2: 0000000000000010 CR3: 000000006e12d000 CR4: 00000000003406b0 [10:00:28.647][Moby ][Info ] Stack: [10:00:28.669][Moby ][Info ] ffff88006e13bbf0 0000000000000000 ffff8800758188c0 00000000000188c0 [10:00:28.690][Moby ][Info ] ffff8800700ca100 0000000000000000 0000000000000000 ffff8800700ca100 [10:00:28.710][Moby ][Info ] ffffffff81100367 ffff8800758188c0 ffffffff811003b9 0000000000000001 [10:00:28.716][Moby ][Info ] Call Trace: [10:00:28.728][Moby ][Info ] [] ? check_preempt_curr+0x2a/0x68 [10:00:28.742][Moby ][Info ] [] ? ttwu_do_wakeup+0x14/0xd0 [10:00:28.756][Moby ][Info ] [] ? try_to_wake_up+0x1d5/0x216 [10:00:28.770][Moby ][Info ] [] ? wake_up_common+0x4c/0x78 [10:00:28.783][Moby ][Info ] [] ? wake_up_sync_key+0x41/0x54 [10:00:28.800][Moby ][Info ] [] ? do_notify_parent_cldstop+0x149/0x17c [10:00:28.814][Moby ][Info ] [] ? ptrace_stop+0x1a3/0x1e1 [10:00:28.828][Moby ][Info ] [] ? ptrace_do_notify+0x81/0xa7 [10:00:28.843][Moby ][Info ] [] ? ptrace_notify+0x5c/0x71 [10:00:28.860][Moby ][Info ] [] ? do_execveat_common.isra.37+0x525/0x662 [10:00:28.881][Moby ][Info ] [] ? do_execve+0x1f/0x21 [10:00:28.894][Moby ][Info ] [] ? SyS_execve+0x28/0x2f [10:00:28.909][Moby ][Info ] [] ? do_syscall_64+0x53/0x61 [10:00:28.925][Moby ][Info ] [] ? entry_SYSCALL64_slow_path+0x25/0x25 [10:00:29.012][Moby ][Info ] Code: 41 56 4c 8d b6 80 00 00 00 41 55 41 54 55 53 48 83 ec 10 48 8b af e8 08 00 00 48 8b 85 f8 00 00 00 48 8d 9d 80 00 00 00 4c 39 f3 <8b> 40 10 89 44 24 04 8b 05 d4 0f d4 00 89 44 24 08 0f 84 4f 01 [10:00:29.025][Moby ][Info ] RIP [] check_preempt_wakeup+0x32/0x1a7 [10:00:29.032][Moby ][Info ] RSP [10:00:29.040][Moby ][Info ] CR2: 0000000000000010 [10:00:29.049][Moby ][Info ] ---[ end trace 49a2591fb0e50f7c ]--- [10:00:29.059][Moby ][Info ] ------------[ cut here ]------------ [10:00:29.087][Moby ][Info ] WARNING: CPU: 0 PID: 328 at ./arch/x86/include/asm/fpu/internal.h:368 copy_kernel_to_fpregs+0x1f/0x28 [10:00:29.095][Moby ][Info ] Modules linked in: [10:00:29.115][Moby ][Info ] CPU: 0 PID: 328 Comm: init-early.sh Tainted: G D W 4.8.12-moby #1 [10:00:29.139][Moby ][Info ] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012 [10:00:29.156][Moby ][Info ] 0000000000000086 00000000e5a4299c ffffffff8141bb51 0000000000000000 [10:00:29.174][Moby ][Info ] 0000000000000000 ffffffff810e0362 0000000000000000 ffff88006e13b7e8 [10:00:29.197][Moby ][Info ] ffff88006e13b7f0 ffff88006e13b7f8 0000000000000086 0000000000000002 [10:00:29.202][Moby ][Info ] Call Trace: [10:00:29.216][Moby ][Info ] [] ? dump_stack+0x5a/0x6f [10:00:29.227][Moby ][Info ] [] ? __warn+0xd2/0xeb [10:00:29.241][Moby ][Info ] [] ? copy_kernel_to_fpregs+0x1f/0x28 [10:00:29.255][Moby ][Info ] [] ? kernel_fpu_end+0x23/0x2f [10:00:29.273][Moby ][Info ] [] ? virt_efi_query_variable_info+0xbf/0xdb [10:00:29.304][Moby ][Info ] [] ? efi_query_variable_store+0x88/0x1a3 [10:00:29.318][Moby ][Info ] [] ? efivar_entry_set_safe+0xf3/0x1b7 [10:00:29.331][Moby ][Info ] [] ? ucs2_strsize+0x8/0xc [10:00:29.345][Moby ][Info ] [] ? efivar_entry_set_safe+0xf3/0x1b7 [10:00:29.356][Moby ][Info ] [] ? sprintf+0x51/0x6d [10:00:29.371][Moby ][Info ] [] ? efi_pstore_write+0xe5/0x11e [10:00:29.386][Moby ][Info ] [] ? efi_pstore_write+0xe5/0x11e [10:00:29.401][Moby ][Info ] [] ? zlib_deflate+0x250/0x269 [10:00:29.414][Moby ][Info ] [] ? pstore_dump+0x23e/0x2a5 [10:00:29.427][Moby ][Info ] [] ? kmsg_dump+0x81/0x8d [10:00:29.440][Moby ][Info ] [] ? oops_end+0x80/0xba [10:00:29.450][Moby ][Info ] [] ? no_context+0x2bf/0x333 [10:00:29.462][Moby ][Info ] [] ? page_fault+0x28/0x30 [10:00:29.477][Moby ][Info ] [] ? check_preempt_wakeup+0x32/0x1a7 [10:00:29.488][Moby ][Info ] [] ? check_preempt_curr+0x2a/0x68 [10:00:29.500][Moby ][Info ] [] ? ttwu_do_wakeup+0x14/0xd0 [10:00:29.514][Moby ][Info ] [] ? try_to_wake_up+0x1d5/0x216 [10:00:29.528][Moby ][Info ] [] ? wake_up_common+0x4c/0x78 [10:00:29.544][Moby ][Info ] [] ? wake_up_sync_key+0x41/0x54 [10:00:29.558][Moby ][Info ] [] ? do_notify_parent_cldstop+0x149/0x17c [10:00:29.572][Moby ][Info ] [] ? ptrace_stop+0x1a3/0x1e1 [10:00:29.592][Moby ][Info ] [] ? ptrace_do_notify+0x81/0xa7 [10:00:29.604][Moby ][Info ] [] ? ptrace_notify+0x5c/0x71 [10:00:29.623][Moby ][Info ] [] ? do_execveat_common.isra.37+0x525/0x662 [10:00:29.635][Moby ][Info ] [] ? do_execve+0x1f/0x21 [10:00:29.650][Moby ][Info ] [] ? SyS_execve+0x28/0x2f [10:00:29.663][Moby ][Info ] [] ? do_syscall_64+0x53/0x61 [10:00:29.680][Moby ][Info ] [] ? entry_SYSCALL64_slow_path+0x25/0x25 [10:00:29.691][Moby ][Info ] ---[ end trace 49a2591fb0e50f7d ]--- [10:01:21.324][Linux ][Error ] Failed to start: Docker hv-sock proxy (vsudd) is not reachable. Let's retry [10:01:21.326][PowerShell ][Info ] Run script... [10:01:25.948][HyperV ][Info ] Hyper-V is running [10:01:25.948][PowerMode ][Info ] Stop [10:01:25.948][HyperV ][Info ] Stop [10:01:25.949][PowerShell ][Info ] Run script with parameters: -Stop True... [10:01:25.956][HyperV ][Info ] Script started at 10:01:25.956 [10:01:25.967][HyperV ][Info ] Module loaded at 10:01:25.967 [10:01:26.014][HyperV ][Info ] Stopping VM MobyLinuxVM... [10:01:28.034][Moby ][Error ] Failed to read Moby's logs: O tempo limite da operação acabou. [10:01:28.182][HyperV ][Info ] Turn Off VM ... [10:01:28.240][HyperV ][Info ] VM MobyLinuxVM killed. Waiting for state to change [10:01:31.259][HyperV ][Info ] Killed VM MobyLinuxVM is off [10:01:31.261][HyperV ][Info ] Destroying Switch DockerNAT... [10:01:32.480][HyperV ][Info ] Removing VM MobyLinuxVM... [10:01:32.709][HyperV ][Debug ] [stop] took 00:00:06.7609728 to run [10:01:32.709][OptimizeDisk ][Info ] Optimize [10:01:32.709][PowerShell ][Info ] Run script... [10:01:32.739][Moby ][Info ] Stop [10:01:32.747][VpnKit ][Info ] Killing existing com.docker.slirp with PID 4512 [10:01:32.756][DataKit ][Info ] Killing existing com.docker.db with PID 11228 [10:01:32.771][HyperV ][Info ] Destroy [10:01:32.781][PowerShell ][Info ] Run script with parameters: -Destroy True -KeepVolume True... [10:01:32.790][HyperV ][Info ] Script started at 10:01:32.790 [10:01:32.810][HyperV ][Info ] Module loaded at 10:01:32.809 [10:01:32.838][HyperV ][Info ] VM MobyLinuxVM does not exist [10:01:32.839][HyperV ][Info ] Destroying Switch DockerNAT... [10:01:32.863][HyperV ][Info ] Removing VM MobyLinuxVM... [10:01:32.878][HyperV ][Debug ] [destroy] took 00:00:00.1070062 to run [10:01:32.878][Firewall ][Info ] Closing ports... [10:01:35.545][Firewall ][Info ] Ports are closed [10:01:35.546][HyperVGuids ][Info ] Removing GUIDs... [10:01:35.549][HyperVGuids ][Info ] GUIDs removed [10:01:35.549][HyperV ][Info ] Create [10:01:35.550][PowerShell ][Info ] Run script with parameters: -Create True -SwitchSubnetAddress 10.0.75.0 -SwitchSubnetMaskSize 24 -CPUs 2 -Memory 2048 -IsoFile C:\Program Files\Docker\Docker\Resources\mobylinux.iso... [10:01:35.559][HyperV ][Info ] Script started at 10:01:35.559 [10:01:35.580][HyperV ][Info ] Module loaded at 10:01:35.580 [10:01:35.638][HyperV ][Info ] Creating Switch: DockerNAT... [10:01:37.373][HyperV ][Info ] Switch created. [10:01:37.671][HyperV ][Info ] Set IP address on switch [10:01:37.687][HyperV ][Info ] Creating VM MobyLinuxVM... [10:01:38.503][HyperV ][Info ] Setting CPUs to 2 and Memory to 2048 MB [10:01:38.707][HyperV ][Info ] Attach VHD C:\Users\Public\Documents\Hyper-V\Virtual Hard Disks\MobyLinuxVM.vhdx [10:01:39.306][HyperV ][Info ] Connect Internal Switch DockerNAT [10:01:39.453][HyperV ][Info ] Attach DVD C:\Program Files\Docker\Docker\Resources\mobylinux.iso [10:01:40.462][HyperV ][Info ] VM created. [10:01:40.463][HyperV ][Debug ] [create] took 00:00:04.9142998 to run [10:01:40.463][PowerMode ][Info ] Stop [10:01:40.463][HyperV ][Info ] Stop [10:01:40.464][PowerShell ][Info ] Run script with parameters: -Stop True... [10:01:40.477][HyperV ][Info ] Script started at 10:01:40.476 [10:01:40.500][HyperV ][Info ] Module loaded at 10:01:40.500 [10:01:40.524][HyperV ][Info ] VM MobyLinuxVM is stopped [10:01:40.524][HyperV ][Debug ] [stop] took 00:00:00.0609988 to run [10:01:40.524][OptimizeDisk ][Info ] Optimize [10:01:40.524][PowerShell ][Info ] Run script... [10:01:41.824][Moby ][Info ] Stop [10:01:41.835][HyperV ][Info ] Create [10:01:41.835][PowerMode ][Info ] Start [10:01:41.835][HyperVGuids ][Info ] Installing GUIDs... [10:01:41.835][Firewall ][Info ] Opening ports for C:\Program Files\Docker\Docker\Resources\com.docker.proxy.exe... [10:01:41.836][PowerShell ][Info ] Run script with parameters: -Create True -SwitchSubnetAddress 10.0.75.0 -SwitchSubnetMaskSize 24 -CPUs 2 -Memory 2048 -IsoFile C:\Program Files\Docker\Docker\Resources\mobylinux.iso... [10:01:41.839][HyperVGuids ][Info ] GUIDs installed [10:01:41.850][HyperV ][Info ] Script started at 10:01:41.849 [10:01:41.875][HyperV ][Info ] Module loaded at 10:01:41.874 [10:01:42.126][HyperV ][Info ] Using existing Switch: DockerNAT [10:01:42.184][HyperV ][Info ] Using existing Switch IP address [10:01:42.206][HyperV ][Info ] Setting CPUs to 2 and Memory to 2048 MB [10:01:42.360][HyperV ][Info ] Connect Internal Switch DockerNAT [10:01:42.874][HyperV ][Info ] VM created. [10:01:42.874][HyperV ][Debug ] [create] took 00:00:01.0390829 to run [10:01:42.874][PowerShell ][Info ] Run script '(Get-VM MobyLinuxVM).Id.Guid'... [10:01:42.893][DataKit ][Info ] Starting C:\Program Files\Docker\Docker\Resources\com.docker.db.exe --url hyperv-connect://3681d0b9-0489-4e21-a4b9-d3bd9733ff4c,\.\pipe\dockerDataBase --color never [10:01:42.896][DataKit ][Info ] Started [10:01:42.897][Database ][Info ] Generating CA Cert Bundle [10:01:42.928][DataKit ][Info ] Starting com.docker.db.exe 0.7.0-34-g6f04213 ... [10:01:42.938][Database ][Info ] CA Cert Bundle Generated [10:01:42.939][Database ][Info ] Writing com.docker.driver.amd64-linux/net/config=static [10:01:42.939][Database ][Info ] Writing com.docker.driver.amd64-linux/net/address=10.0.75.2 [10:01:42.939][Database ][Info ] Writing com.docker.driver.amd64-linux/net/netmask=255.255.255.0 [10:01:42.939][Database ][Info ] Writing com.docker.driver.amd64-linux/net/gateway=10.0.75.1 [10:01:42.939][Database ][Info ] Writing com.docker.driver.amd64-linux/network=hybrid [10:01:42.939][Database ][Info ] Writing com.docker.driver.amd64-linux/etc/docker/daemon.json={"registry-mirrors":[],"insecure-registries":[]} [10:01:42.939][Database ][Info ] Writing com.docker.driver.amd64-linux/etc/sysctl.conf= [10:01:42.939][Database ][Info ] Writing com.docker.driver.amd64-linux/native/port-forwarding=true [10:01:42.939][DataKit ][Info ] com.docker.db.exe: accepted a new connection on \.\pipe\dockerDataBase [10:01:42.980][DataKit ][Info ] com.docker.db.exe: accepted a new connection on \.\pipe\dockerDataBase [10:01:42.981][DataKit ][Info ] com.docker.db.exe: Using protocol TwoThousand msize 16384 [10:01:43.453][Database ][Info ] Successfully wrote 8 value(s) [10:01:43.453][Database ][Info ] Writing com.docker.driver.amd64-linux/etc/ssl/certs/ca-certificates.crt=C:\WINDOWS\TEMP\tmp116D.tmp [10:01:43.496][DataKit ][Info ] com.docker.db.exe: accepted a new connection on \.\pipe\dockerDataBase [10:01:43.496][DataKit ][Info ] com.docker.db.exe: Using protocol TwoThousand msize 16384 [10:01:43.626][Firewall ][Info ] Ports are opened [10:01:43.636][Database ][Info ] Successfully wrote value [10:01:43.637][Moby ][Info ] Connecting... [10:01:43.637][Moby ][Error ] Failed to read Moby's logs: O tempo limite da operação acabou. [10:01:43.637][HyperV ][Info ] Start [10:01:43.638][PowerShell ][Info ] Run script '$(Find-NetRoute -RemoteIPAddress 8.8.8.8).InterfaceIndex[0]'... [10:01:43.638][PowerShell ][Info ] Run script with parameters: -Start True... [10:01:43.651][HyperV ][Info ] Script started at 10:01:43.651 [10:01:43.686][Database ][Info ] Writing com.docker.driver.amd64-linux/slirp/dns=nameserver 172.16.22.6 nameserver 172.16.22.40 search search cit search citdev search ciandt.local [10:01:43.728][DataKit ][Info ] com.docker.db.exe: accepted a new connection on \.\pipe\dockerDataBase [10:01:43.728][DataKit ][Info ] com.docker.db.exe: Using protocol TwoThousand msize 16384 [10:01:43.838][Database ][Info ] Successfully wrote 1 value(s) [10:01:43.869][VpnKit ][Info ] Starting C:\Program Files\Docker\Docker\Resources\com.docker.slirp.exe --ethernet hyperv-connect://3681d0b9-0489-4e21-a4b9-d3bd9733ff4c --port hyperv-connect://3681d0b9-0489-4e21-a4b9-d3bd9733ff4c --db \.\pipe\dockerDataBase --debug --diagnostics \.\pipe\dockerVpnKitDiagnostics [10:01:43.873][VpnKit ][Info ] Started [10:01:43.906][VpnKit ][Info ] com.docker.slirp.exe: Logging to stdout (stdout:true DEBUG:false) [10:01:43.906][VpnKit ][Info ] com.docker.slirp.exe: Setting handler to ignore all SIGPIPE signals [10:01:43.906][VpnKit ][Info ] com.docker.slirp.exe: vpnkit version %VERSION% with hostnet version %HOSTNET_PINNED% uwt version 0.0.3 hvsock version 0.11.2 %HVSOCK_PINNED% [10:01:43.906][VpnKit ][Info ] com.docker.slirp.exe: starting port forwarding server on port_control_url:hyperv-connect://3681d0b9-0489-4e21-a4b9-d3bd9733ff4c vsock_path: [10:01:43.906][VpnKit ][Info ] com.docker.slirp.exe: connecting to 3681d0b9-0489-4e21-a4b9-d3bd9733ff4c:0B95756A-9985-48AD-9470-78E060895BE7 [10:01:43.914][VpnKit ][Info ] com.docker.slirp.exe: connecting to 3681d0b9-0489-4e21-a4b9-d3bd9733ff4c:30D48B34-7D27-4B0B-AAAF-BBBED334DD59 [10:01:43.914][VpnKit ][Error ] com.docker.slirp.exe: While watching /etc/resolv.conf: ENOENT [10:01:43.914][VpnKit ][Info ] com.docker.slirp.exe: hosts file has bindings for [10:01:44.030][HyperV ][Info ] Module loaded at 10:01:44.030 [10:01:44.033][HyperV ][Info ] Starting VM MobyLinuxVM... [10:01:45.015][HyperV ][Debug ] [start] took 00:00:01.3781153 to run [10:01:45.015][Linux ][Info ] Trying to connect to vsud... [10:01:45.647][Moby ][Info ] Connected [10:01:45.848][Moby ][Info ] done. [10:01:45.848][Moby ][Info ] Booting the kernel. [10:01:45.852][Moby ][Info ] Linux version 4.8.12-moby (root@1d811a9194c4) (gcc version 5.3.0 (Alpine 5.3.0) ) #1 SMP Tue Dec 6 05:03:18 UTC 2016 [10:01:45.855][Moby ][Info ] Command line: earlyprintk=ttyS0,115200 console=ttyS0,115200 mobyplatform=windows rootdelay=300 noautodetect [10:01:45.855][Moby ][Info ] [10:01:45.857][Moby ][Info ] ------------[ cut here ]------------ [10:01:45.860][Moby ][Info ] WARNING: CPU: 0 PID: 0 at arch/x86/kernel/fpu/xstate.c:590 fpu__init_system_xstate+0x393/0x8cb [10:01:45.862][Moby ][Info ] XSAVE consistency problem, dumping leaves [10:01:45.865][Moby ][Info ] Modules linked in: [10:01:45.867][Moby ][Info ] CPU: 0 PID: 0 Comm: swapper Not tainted 4.8.12-moby #1 [10:01:45.870][Moby ][Info ] 0000000000000086 79bef2e379bef2e3 ffffffff8141bb51 ffffffff81e03e18 [10:01:45.873][Moby ][Info ] 0000000000000000 ffffffff810e0362 000000000000000a ffffffff81e03e78 [10:01:45.876][Moby ][Info ] 00000000000003c0 0000000000000440 0000000000000001 000000000419a1f0 [10:01:45.877][Moby ][Info ] Call Trace: [10:01:45.881][Moby ][Info ] [] ? dump_stack+0x5a/0x6f [10:01:45.888][Moby ][Info ] [] ? warn+0xd2/0xeb [10:01:45.892][Moby ][Info ] [] ? warn_slowpath_fmt+0x5a/0x76 [10:01:45.905][Moby ][Info ] [] ? cpuid.constprop.11+0x7/0x8 [10:01:45.913][Moby ][Info ] [] ? fpuinit_system_xstate+0x393/0x8cb [10:01:45.922][Moby ][Info ] [] ? fpuinit_system+0x204/0x31e [10:01:45.927][Moby ][Info ] [] ? setup_arch+0xb2/0xc07 [10:01:45.930][Moby ][Info ] [] ? setup_arch+0xb2/0xc07 [10:01:45.939][Moby ][Info ] [] ? start_kernel+0xa9/0x440 [10:01:45.943][Moby ][Info ] [] ? early_idt_handler_array+0x120/0x120 [10:01:45.946][Moby ][Info ] [] ? x86_64_start_kernel+0x13f/0x161 [10:01:45.951][Moby ][Info ] ---[ end trace fc7e19131b2e2aca ]--- [10:01:45.955][Moby ][Info ] CPUID[0d, 00]: eax=0000001f ebx=00000440 ecx=00000440 edx=00000000 [10:01:45.961][Moby ][Info ] CPUID[0d, 01]: eax=0000000b ebx=00000000 ecx=00000000 edx=00000000 [10:01:45.964][Moby ][Info ] CPUID[0d, 02]: eax=00000100 ebx=00000240 ecx=00000000 edx=00000000 [10:01:45.971][Moby ][Info ] CPUID[0d, 03]: eax=00000040 ebx=000003c0 ecx=00000000 edx=00000000 [10:01:45.974][Moby ][Info ] CPUID[0d, 04]: eax=00000040 ebx=00000400 ecx=00000000 edx=00000000 [10:01:45.978][Moby ][Info ] CPUID[0d, 05]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:01:45.981][Moby ][Info ] CPUID[0d, 06]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:01:45.985][Moby ][Info ] CPUID[0d, 07]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:01:45.988][Moby ][Info ] CPUID[0d, 08]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:01:46.001][Moby ][Info ] CPUID[0d, 09]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:01:46.005][Moby ][Info ] CPUID[0d, 0a]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:01:46.008][Moby ][Info ] CPUID[0d, 0b]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:01:46.011][Moby ][Info ] CPUID[0d, 0c]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:01:46.014][Moby ][Info ] CPUID[0d, 0d]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:01:46.019][Moby ][Info ] CPUID[0d, 0e]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:01:46.022][Moby ][Info ] CPUID[0d, 0f]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:01:46.026][Moby ][Info ] CPUID[0d, 10]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:01:46.031][Moby ][Info ] CPUID[0d, 11]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:01:46.035][Moby ][Info ] CPUID[0d, 12]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:01:46.039][Moby ][Info ] CPUID[0d, 13]: eax=00000000 ebx=00000000 ecx=00000000 edx=00000000 [10:01:46.043][Moby ][Info ] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [10:01:46.045][Moby ][Info ] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [10:01:46.048][Moby ][Info ] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [10:01:46.052][Moby ][Info ] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [10:01:46.057][Moby ][Info ] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'

[10:01:46.076][Moby ][Info ] x86/fpu: Enabled xstate features 0x1f, context size is 0 bytes, using 'compacted' format. [10:01:46.080][Moby ][Info ] x86/fpu: Using 'eager' FPU context switches. [10:01:46.083][Moby ][Info ] e820: BIOS-provided physical RAM map: [10:01:46.086][Moby ][Info ] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [10:01:46.088][Moby ][Info ] BIOS-e820: [mem 0x0000000000100000-0x000000007eeedfff] usable [10:01:46.090][Moby ][Info ] BIOS-e820: [mem 0x000000007eeee000-0x000000007eef1fff] ACPI data [10:01:46.092][Moby ][Info ] BIOS-e820: [mem 0x000000007eef2000-0x000000007ef1afff] reserved [10:01:46.094][Moby ][Info ] BIOS-e820: [mem 0x000000007ef1b000-0x000000007ff9afff] usable [10:01:46.096][Moby ][Info ] BIOS-e820: [mem 0x000000007ff9b000-0x000000007fff2fff] reserved [10:01:46.097][Moby ][Info ] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffafff] ACPI data [10:01:46.099][Moby ][Info ] BIOS-e820: [mem 0x000000007fffb000-0x000000007fffefff] ACPI NVS [10:01:46.101][Moby ][Info ] BIOS-e820: [mem 0x000000007ffff000-0x000000007fffffff] usable [10:01:46.102][Moby ][Info ] bootconsole [earlyser0] enabled [10:01:46.103][Moby ][Info ] NX (Execute Disable) protection: active [10:01:46.105][Moby ][Info ] efi: EFI v2.31 by EDK II [10:01:46.110][Moby ][Info ] efi: ACPI=0x7fffa000 ACPI 2.0=0x7fffa014 SMBIOS=0x7fff2000 PROP=0x419a3d8 MEMATTR=0x7f527d18 [10:01:46.113][Moby ][Info ] SMBIOS 2.4 present. [10:01:46.115][Moby ][Info ] Hypervisor detected: Microsoft HyperV [10:01:46.116][Moby ][Info ] HyperV: features 0x2e7f, hints 0x2c2c [10:01:46.118][Moby ][Info ] HyperV: LAPIC Timer Frequency: 0x1e8480 [10:01:46.121][Moby ][Info ] clocksource: hyperv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns [10:01:46.124][Moby ][Info ] tsc: Marking TSC unstable due to running on Hyper-V [10:01:46.126][Moby ][Info ] e820: last_pfn = 0x80000 max_arch_pfn = 0x400000000 [10:01:46.129][Moby ][Info ] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[10:01:46.132][Moby ][Info ] Using GB pages for direct mapping [10:01:46.136][Moby ][Info ] RAMDISK: [mem 0x77858000-0x7b093fff] [10:01:46.139][Moby ][Info ] ACPI: Early table checksum verification disabled [10:01:46.143][Moby ][Info ] ACPI: RSDP 0x000000007FFFA014 000024 (v02 VRTUAL) [10:01:46.148][Moby ][Info ] ACPI: XSDT 0x000000007FFF90E8 00005C (v01 VRTUAL MICROSFT 00000001 MSFT 00000001) [10:01:46.152][Moby ][Info ] ACPI: FACP 0x000000007FFF7000 0000F4 (v04 VRTUAL MICROSFT 00000001 MSFT 00000001) [10:01:46.157][Moby ][Info ] ACPI: DSDT 0x000000007EEEF000 00256F (v02 MSFTVM DSDT01 00000001 MSFT 04000000) [10:01:46.160][Moby ][Info ] ACPI: FACS 0x000000007FFFE000 000040 [10:01:46.163][Moby ][Info ] ACPI: APIC 0x000000007FFF8000 0007D2 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001) [10:01:46.166][Moby ][Info ] ACPI: OEM0 0x000000007FFF6000 000064 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001) [10:01:46.168][Moby ][Info ] ACPI: WAET 0x000000007FFF5000 000028 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001) [10:01:46.171][Moby ][Info ] ACPI: OEM1 0x000000007FFF4000 00009E (v02 MSFTVM UARTS 00000001 MSFT 04000000) [10:01:46.173][Moby ][Info ] ACPI: OEM2 0x000000007FFF3000 0002E2 (v02 MSFTVM VTPM2 00000001 MSFT 04000000) [10:01:46.176][Moby ][Info ] ACPI: SRAT 0x000000007EEEE000 000190 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001) [10:01:46.196][Moby ][Info ] Zone ranges: [10:01:46.198][Moby ][Info ] DMA [mem 0x0000000000001000-0x0000000000ffffff] [10:01:46.200][Moby ][Info ] DMA32 [mem 0x0000000001000000-0x000000007fffffff] [10:01:46.201][Moby ][Info ] Normal empty [10:01:46.203][Moby ][Info ] Movable zone start for each node [10:01:46.205][Moby ][Info ] Early memory node ranges [10:01:46.208][Moby ][Info ] node 0: [mem 0x0000000000001000-0x000000000009ffff] [10:01:46.209][Moby ][Info ] node 0: [mem 0x0000000000100000-0x000000007eeedfff] [10:01:46.216][Moby ][Info ] node 0: [mem 0x000000007ef1b000-0x000000007ff9afff] [10:01:46.216][Moby ][Info ] node 0: [mem 0x000000007ffff000-0x000000007fffffff] [10:01:46.216][Moby ][Info ] Initmem setup node 0 [mem 0x0000000000001000-0x000000007fffffff] [10:01:46.225][Moby ][Info ] ACPI: PM-Timer IO Port: 0x408 [10:01:46.228][Moby ][Info ] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [10:01:46.231][Moby ][Info ] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [10:01:46.233][Moby ][Info ] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [10:01:46.234][Moby ][Info ] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [10:01:46.236][Moby ][Info ] Using ACPI (MADT) for SMP configuration information [10:01:46.237][Moby ][Info ] smpboot: 240 Processors exceeds NR_CPUS limit of 128 [10:01:46.239][Moby ][Info ] smpboot: Allowing 128 CPUs, 126 hotplug CPUs [10:01:46.241][Moby ][Info ] e820: [mem 0x80000000-0xffffffff] available for PCI devices [10:01:46.243][Moby ][Info ] Booting paravirtualized kernel on bare hardware [10:01:46.244][Moby ][Info ] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [10:01:46.246][Moby ][Info ] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:128 nr_node_ids:1 [10:01:46.253][Moby ][Info ] percpu: Embedded 35 pages/cpu @ffff880075800000 s105048 r8192 d30120 u262144 [10:01:46.254][Moby ][Info ] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515799 [10:01:46.259][Moby ][Info ] Kernel command line: earlyprintk=ttyS0,115200 console=ttyS0,115200 mobyplatform=windows rootdelay=300 noautodetect [10:01:46.259][Moby ][Info ] [10:01:46.259][Moby ][Info ] log_buf_len individual max cpu contribution: 4096 bytes [10:01:46.259][Moby ][Info ] log_buf_len total cpu_extra contributions: 520192 bytes [10:01:46.261][Moby ][Info ] log_buf_len min size: 131072 bytes [10:01:46.263][Moby ][Info ] log_buf_len: 1048576 bytes [10:01:46.265][Moby ][Info ] early log buf free: 119388(91%) [10:01:46.268][Moby ][Info ] PID hash table entries: 4096 (order: 3, 32768 bytes) [10:01:46.270][Moby ][Info ] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [10:01:46.271][Moby ][Info ] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [10:01:46.283][Moby ][Info ] Memory: 1950532K/2096184K available (8442K kernel code, 1394K rwdata, 2848K rodata, 1372K init, 588K bss, 145652K reserved, 0K cma-reserved) [10:01:46.285][Moby ][Info ] Hierarchical RCU implementation. [10:01:46.286][Moby ][Info ] Build-time adjustment of leaf fanout to 64. [10:01:46.290][Moby ][Info ] Using NULL legacy PIC [10:01:46.291][Moby ][Info ] NR_IRQS:8448 nr_irqs:1448 0 [10:01:46.295][Moby ][Info ] Console: colour dummy device 80x25 [10:01:46.298][Moby ][Info ] console [ttyS0] enabled [10:01:46.299][Moby ][Info ] console [ttyS0] enabled [10:01:46.303][Moby ][Info ] bootconsole [earlyser0] disabled [10:01:46.304][Moby ][Info ] bootconsole [earlyser0] disabled [10:01:46.344][Moby ][Info ] tsc: Fast TSC calibration failed [10:01:46.346][Moby ][Info ] tsc: Unable to calibrate against PIT [10:01:46.347][Moby ][Info ] tsc: using PMTIMER reference calibration [10:01:46.349][Moby ][Info ] tsc: Detected 2407.419 MHz processor [10:01:46.352][Moby ][Info ] Calibrating delay loop (skipped), value calculated using timer frequency.. 4814.83 BogoMIPS (lpj=24074190) [10:01:46.354][Moby ][Info ] pid_max: default: 131072 minimum: 1024 [10:01:46.356][Moby ][Info ] ACPI: Core revision 20160422 [10:01:46.362][Moby ][Info ] ACPI: 1 ACPI AML tables successfully acquired and loaded [10:01:46.363][Moby ][Info ] [10:01:46.366][Moby ][Info ] Security Framework initialized [10:01:46.370][Moby ][Info ] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [10:01:46.373][Moby ][Info ] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [10:01:46.376][Moby ][Info ] CPU: Physical Processor ID: 0 [10:01:46.378][Moby ][Info ] CPU: Processor Core ID: 0 [10:01:46.381][Moby ][Info ] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [10:01:46.384][Moby ][Info ] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [10:01:46.387][Moby ][Info ] Freeing SMP alternatives memory: 24K (ffffffff820b5000 - ffffffff820bb000) [10:01:46.391][Moby ][Info ] ftrace: allocating 37214 entries in 146 pages [10:01:46.442][Moby ][Info ] smpboot: APIC(0) Converting physical 0 to logical package 0 [10:01:46.454][Moby ][Info ] smpboot: Max logical packages: 120 [10:01:46.471][Moby ][Info ] Switched APIC routing to physical flat. [10:01:46.526][Moby ][Info ] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3) [10:01:46.567][Moby ][Info ] Performance Events: unsupported p6 CPU model 78 no PMU driver, software events only. [10:01:46.593][Moby ][Info ] NMI watchdog: disabled (cpu0): hardware events not enabled [10:01:46.629][Moby ][Info ] NMI watchdog: Shutting down hard lockup detector on all cpus [10:01:46.650][Moby ][Info ] x86: Booting SMP configuration: [10:01:46.826][Moby ][Info ] .... node #0, CPUs: #1 [10:01:46.847][Moby ][Info ] x86: Booted up 1 node, 2 CPUs [10:01:46.874][Moby ][Info ] smpboot: Total of 2 processors activated (9692.56 BogoMIPS) [10:01:46.888][Moby ][Info ] devtmpfs: initialized [10:01:46.900][Moby ][Info ] x86/mm: Memory block size: 128MB [10:01:46.985][Moby ][Info ] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [10:01:47.003][Moby ][Info ] NET: Registered protocol family 16 [10:01:47.044][Moby ][Info ] cpuidle: using governor ladder [10:01:47.097][Moby ][Info ] cpuidle: using governor menu [10:01:47.114][Moby ][Info ] ACPI: bus type PCI registered [10:01:47.146][Moby ][Info ] PCI: Fatal: No config space access function found [10:01:47.192][Moby ][Info ] HugeTLB registered 1 GB page size, pre-allocated 0 pages [10:01:47.213][Moby ][Info ] HugeTLB registered 2 MB page size, pre-allocated 0 pages [10:01:47.226][Moby ][Info ] ACPI: Added _OSI(Module Device) [10:01:47.239][Moby ][Info ] ACPI: Added _OSI(Processor Device) [10:01:47.260][Moby ][Info ] ACPI: Added _OSI(3.0 _SCP Extensions) [10:01:47.282][Moby ][Info ] ACPI: Added _OSI(Processor Aggregator Device) [10:01:47.315][Moby ][Info ] ACPI: Executed 1 blocks of module-level executable AML code [10:01:47.328][Moby ][Info ] ACPI: Dynamic OEM Table Load: [10:01:47.353][Moby ][Info ] ACPI: OEM1 0x0000000000000000 00009E (v02 MSFTVM UARTS 00000001 MSFT 04000000) [10:01:47.364][Moby ][Info ] ACPI: Interpreter enabled [10:01:47.374][Moby ][Info ] ACPI: (supports S0 S5) [10:01:47.392][Moby ][Info ] ACPI: Using IOAPIC for interrupt routing [10:01:47.438][Moby ][Info ] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [10:01:47.469][Moby ][Info ] ACPI: Enabled 1 GPEs in block 00 to 0F [10:01:47.484][Moby ][Info ] SCSI subsystem initialized [10:01:47.500][Moby ][Info ] pps_core: LinuxPPS API ver. 1 registered [10:01:47.559][Moby ][Info ] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [10:01:47.572][Moby ][Info ] PTP clock support registered [10:01:47.588][Moby ][Info ] wmi: Mapper loaded [10:01:47.640][Moby ][Info ] clocksource: hyperv_clocksource_tsc_page: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns [10:01:47.661][Moby ][Info ] hv_vmbus: Hyper-V Host Build:14393-10.0-0-0.0; Vmbus version:4.0 [10:01:47.674][Moby ][Info ] PCI: Using ACPI for IRQ routing [10:01:47.683][Moby ][Info ] PCI: System does not support PCI [10:01:47.714][Moby ][Info ] NetLabel: Initializing [10:01:47.728][Moby ][Info ] NetLabel: domain hash size = 128 [10:01:47.747][Moby ][Info ] NetLabel: protocols = UNLABELED CIPSOv4 [10:01:47.765][Moby ][Info ] NetLabel: unlabeled traffic allowed by default [10:01:47.787][Moby ][Info ] clocksource: Switched to clocksource hyperv_clocksource_tsc_page [10:01:47.811][Moby ][Info ] FS-Cache: Loaded [10:01:47.824][Moby ][Info ] CacheFiles: Loaded [10:01:47.831][Moby ][Info ] pnp: PnP ACPI init [10:01:47.839][Moby ][Info ] pnp: PnP ACPI: found 3 devices [10:01:47.941][Moby ][Info ] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [10:01:47.958][Moby ][Info ] NET: Registered protocol family 2 [10:01:48.003][Moby ][Info ] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [10:01:48.017][Moby ][Info ] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [10:01:48.037][Moby ][Info ] TCP: Hash tables configured (established 16384 bind 16384) [10:01:48.059][Moby ][Info ] UDP hash table entries: 1024 (order: 3, 32768 bytes) [10:01:48.090][Moby ][Info ] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [10:01:48.106][Moby ][Info ] NET: Registered protocol family 1 [10:01:48.125][Moby ][Info ] RPC: Registered named UNIX socket transport module. [10:01:48.139][Moby ][Info ] RPC: Registered udp transport module. [10:01:48.155][Moby ][Info ] RPC: Registered tcp transport module. [10:01:48.178][Moby ][Info ] RPC: Registered tcp NFSv4.1 backchannel transport module. [10:01:48.190][Moby ][Info ] Unpacking initramfs... [10:01:49.351][Moby ][Info ] Freeing initrd memory: 57584K (ffff880077858000 - ffff88007b094000) [10:01:49.378][Moby ][Info ] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 10737418240 ms ovfl timer [10:01:49.395][Moby ][Info ] RAPL PMU: hw unit of domain pp0-core 2^-0 Joules [10:01:49.419][Moby ][Info ] RAPL PMU: hw unit of domain package 2^-0 Joules [10:01:49.438][Moby ][Info ] RAPL PMU: hw unit of domain dram 2^-0 Joules [10:01:49.463][Moby ][Info ] RAPL PMU: hw unit of domain pp1-gpu 2^-0 Joules [10:01:49.488][Moby ][Info ] RAPL PMU: hw unit of domain psys 2^-0 Joules [10:01:49.538][Moby ][Info ] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22b397c591e, max_idle_ns: 440795207248 ns [10:01:49.575][Moby ][Info ] futex hash table entries: 32768 (order: 9, 2097152 bytes) [10:01:49.596][Moby ][Info ] audit: initializing netlink subsys (disabled) [10:01:49.619][Moby ][Info ] audit: type=2000 audit(1481709707.590:1): initialized [10:01:49.644][Moby ][Info ] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [10:01:49.665][Moby ][Info ] FS-Cache: Netfs 'nfs' registered for caching [10:01:49.685][Moby ][Info ] NFS: Registering the id_resolver key type [10:01:49.705][Moby ][Info ] Key type id_resolver registered [10:01:49.735][Moby ][Info ] Key type id_legacy registered [10:01:49.781][Moby ][Info ] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [10:01:49.819][Moby ][Info ] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [10:01:49.860][Moby ][Info ] FS-Cache: Netfs 'cifs' registered for caching [10:01:49.878][Moby ][Info ] ntfs: driver 2.1.32 [Flags: R/O]. [10:01:49.920][Moby ][Info ] fuse init (API version 7.25) [10:01:49.946][Moby ][Info ] 9p: Installing v9fs 9p2000 file system support [10:01:49.994][Moby ][Info ] FS-Cache: Netfs '9p' registered for caching [10:01:50.016][Moby ][Info ] aufs 4.8-20161010 [10:01:50.037][Moby ][Info ] NET: Registered protocol family 38 [10:01:50.046][Moby ][Info ] Key type asymmetric registered [10:01:50.061][Moby ][Info ] Asymmetric key parser 'x509' registered [10:01:50.099][Moby ][Info ] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [10:01:50.109][Moby ][Info ] io scheduler noop registered [10:01:50.135][Moby ][Info ] io scheduler deadline registered (default) [10:01:50.154][Moby ][Info ] io scheduler cfq registered [10:01:50.179][Moby ][Info ] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [10:01:50.190][Moby ][Info ] random: fast init done [10:01:50.216][Moby ][Info ] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [10:01:50.241][Moby ][Info ] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [10:01:50.258][Moby ][Info ] hv_vmbus: registering driver hyperv_fb [10:01:50.270][Moby ][Info ] GHES: HEST is not enabled! [10:01:50.299][Moby ][Info ] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [10:01:50.406][Moby ][Info ] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [10:01:50.557][Moby ][Info ] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [10:01:50.571][Moby ][Info ] Initializing Nozomi driver 2.1d [10:01:50.613][Moby ][Info ] Non-volatile memory driver v1.3 [10:01:50.647][Moby ][Info ] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [10:01:50.657][Moby ][Info ] loop: module loaded [10:01:50.674][Moby ][Info ] nbd: registered device at major 43 [10:01:50.707][Moby ][Info ] VMware PVSCSI driver - version 1.0.6.0-k [10:01:50.734][Moby ][Info ] hv_vmbus: registering driver hv_storvsc [10:01:50.783][Moby ][Info ] scsi host0: storvsc_host_t [10:01:50.823][Moby ][Info ] scsi 0:0:0:0: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 5 [10:01:50.890][Moby ][Info ] scsi 0:0:0:1: CD-ROM Msft Virtual DVD-ROM 1.0 PQ: 0 ANSI: 0 [10:01:50.933][Moby ][Info ] sd 0:0:0:0: [sda] 125829120 512-byte logical blocks: (64.4 GB/60.0 GiB) [10:01:50.953][Moby ][Info ] sr 0:0:0:1: [sr0] scsi3-mmc drive: 0x/0x caddy [10:01:50.972][Moby ][Info ] cdrom: Uniform CD-ROM driver Revision: 3.20 [10:01:50.992][Moby ][Info ] sd 0:0:0:0: Attached scsi generic sg0 type 0 [10:01:51.008][Moby ][Info ] sr 0:0:0:1: Attached scsi generic sg1 type 5 [10:01:51.032][Moby ][Info ] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [10:01:51.056][Moby ][Info ] tun: Universal TUN/TAP device driver, 1.6 [10:01:51.074][Moby ][Info ] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com [10:01:51.114][Moby ][Info ] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [10:01:51.132][Moby ][Info ] e1000: Copyright (c) 1999-2006 Intel Corporation. [10:01:51.191][Moby ][Info ] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [10:01:51.310][Moby ][Info ] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [10:01:51.353][Moby ][Info ] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 3.2.2-k [10:01:51.370][Moby ][Info ] ixgbevf: Copyright (c) 2009 - 2015 Intel Corporation. [10:01:51.382][Moby ][Info ] PPP generic driver version 2.4.2 [10:01:51.401][Moby ][Info ] PPP BSD Compression module registered [10:01:51.429][Moby ][Info ] PPP Deflate Compression module registered [10:01:51.449][Moby ][Info ] PPP MPPE Compression module registered [10:01:51.464][Moby ][Info ] NET: Registered protocol family 24 [10:01:51.476][Moby ][Info ] PPTP driver version 0.8.5 [10:01:51.501][Moby ][Info ] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI [10:01:51.515][Moby ][Info ] hv_vmbus: registering driver hv_netvsc [10:01:51.538][Moby ][Info ] hv_netvsc: hv_netvsc channel opened successfully [10:01:51.557][Moby ][Info ] sd 0:0:0:0: [sda] 4096-byte physical blocks [10:01:51.575][Moby ][Info ] sd 0:0:0:0: [sda] Write Protect is off [10:01:51.601][Moby ][Info ] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [10:01:51.627][Moby ][Info ] sd 0:0:0:0: [sda] Attached SCSI disk [10:01:51.836][Moby ][Info ] hv_netvsc vmbus_5: Send section size: 6144, Section count:2560 [10:01:51.885][Moby ][Info ] hv_netvsc vmbus_5: Device MAC 00:15:5d:4b:01:15 link state up [10:01:51.908][Moby ][Info ] Fusion MPT base driver 3.04.20 [10:01:51.934][Moby ][Info ] Copyright (c) 1999-2008 LSI Corporation [10:01:51.969][Moby ][Info ] Fusion MPT SPI Host driver 3.04.20 [10:01:51.993][Moby ][Info ] aoe: AoE v85 initialised. [10:01:52.020][Moby ][Info ] i8042: PNP: No PS/2 controller found. Probing ports directly. [10:01:53.166][Moby ][Info ] i8042: No controller found [10:01:53.186][Moby ][Info ] hv_vmbus: registering driver hyperv_keyboard [10:01:53.203][Moby ][Info ] mousedev: PS/2 mouse device common for all mice [10:01:53.226][Moby ][Info ] input: PC Speaker as /devices/platform/pcspkr/input/input0 [10:01:53.239][Moby ][Info ] rtc_cmos 00:00: RTC can wake from S4 [10:01:53.296][Moby ][Info ] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [10:01:53.327][Moby ][Info ] rtc_cmos 00:00: alarms up to one month, 114 bytes nvram [10:01:53.343][Moby ][Info ] i2c /dev entries driver [10:01:53.361][Moby ][Info ] EFI Variables Facility v0.08 2004-May-17 [10:01:53.377][Moby ][Info ] pstore: using zlib compression [10:01:53.397][Moby ][Info ] pstore: Registered efi as persistent store backend [10:01:53.414][Moby ][Info ] hv_utils: Registering HyperV Utility Driver [10:01:53.454][Moby ][Info ] hv_vmbus: registering driver hv_util [10:01:53.469][Moby ][Info ] oprofile: using timer interrupt. [10:01:53.485][Moby ][Info ] GACT probability on [10:01:53.498][Moby ][Info ] Mirror/redirect action on [10:01:53.511][Moby ][Info ] Simple TC action Loaded [10:01:53.529][Moby ][Info ] netem: version 1.3 [10:01:53.541][Moby ][Info ] u32 classifier [10:01:53.555][Moby ][Info ] Performance counters on [10:01:53.569][Moby ][Info ] input device check on [10:01:53.578][Moby ][Info ] Actions configured [10:01:53.593][Moby ][Info ] Netfilter messages via NETLINK v0.30. [10:01:53.612][Moby ][Info ] nfnl_acct: registering with nfnetlink. [10:01:53.634][Moby ][Info ] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [10:01:53.658][Moby ][Info ] ctnetlink v0.93: registering with nfnetlink. [10:01:53.690][Moby ][Info ] nf_tables: (c) 2007-2009 Patrick McHardy kaber@trash.net [10:01:53.714][Moby ][Info ] nf_tables_compat: (c) 2012 Pablo Neira Ayuso pablo@netfilter.org [10:01:53.735][Moby ][Info ] xt_time: kernel timezone is -0000 [10:01:53.743][Moby ][Info ] ip_set: protocol 6 [10:01:53.769][Moby ][Info ] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP) [10:01:53.797][Moby ][Info ] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [10:01:53.814][Moby ][Info ] IPVS: Creating netns size=2104 id=0 [10:01:53.825][Moby ][Info ] IPVS: ipvs loaded. [10:01:53.839][Moby ][Info ] IPVS: [rr] scheduler registered. [10:01:53.854][Moby ][Info ] IPVS: [wrr] scheduler registered. [10:01:53.865][Moby ][Info ] IPVS: [lc] scheduler registered. [10:01:53.876][Moby ][Info ] IPVS: [wlc] scheduler registered. [10:01:53.887][Moby ][Info ] IPVS: [fo] scheduler registered. [10:01:53.903][Moby ][Info ] IPVS: [ovf] scheduler registered. [10:01:53.918][Moby ][Info ] IPVS: [lblc] scheduler registered. [10:01:53.933][Moby ][Info ] IPVS: [lblcr] scheduler registered. [10:01:53.946][Moby ][Info ] IPVS: [dh] scheduler registered. [10:01:53.959][Moby ][Info ] IPVS: [sh] scheduler registered. [10:01:53.970][Moby ][Info ] IPVS: [sed] scheduler registered. [10:01:53.990][Moby ][Info ] IPVS: [nq] scheduler registered. [10:01:54.005][Moby ][Info ] IPVS: ftp: loaded support on port[0] = 21 [10:01:54.022][Moby ][Info ] ipip: IPv4 and MPLS over IPv4 tunneling driver [10:01:54.045][Moby ][Info ] gre: GRE over IPv4 demultiplexor driver [10:01:54.065][Moby ][Info ] ip_gre: GRE over IPv4 tunneling driver [10:01:54.083][Moby ][Info ] IPv4 over IPsec tunneling driver [10:01:54.122][Moby ][Info ] ip_tables: (C) 2000-2006 Netfilter Core Team [10:01:54.144][Moby ][Info ] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [10:01:54.161][Moby ][Info ] arp_tables: arp_tables: (C) 2002 David S. Miller [10:01:54.175][Moby ][Info ] Initializing XFRM netlink socket [10:01:54.191][Moby ][Info ] NET: Registered protocol family 10 [10:01:54.199][Moby ][Info ] mip6: Mobile IPv6 [10:01:54.216][Moby ][Info ] ip6_tables: (C) 2000-2006 Netfilter Core Team [10:01:54.230][Moby ][Info ] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [10:01:54.244][Moby ][Info ] ip6_gre: GRE over IPv6 tunneling driver [10:01:54.257][Moby ][Info ] NET: Registered protocol family 17 [10:01:54.268][Moby ][Info ] NET: Registered protocol family 15 [10:01:54.323][Moby ][Info ] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [10:01:54.343][Moby ][Info ] Bridge firewalling registered [10:01:54.358][Moby ][Info ] Ebtables v2.0 registered [10:01:54.371][Moby ][Info ] l2tp_core: L2TP core driver, V2.0 [10:01:54.382][Moby ][Info ] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [10:01:54.394][Moby ][Info ] 8021q: 802.1Q VLAN Support v1.8 [10:01:54.406][Moby ][Info ] 9pnet: Installing 9P2000 support [10:01:54.419][Moby ][Info ] Key type dns_resolver registered [10:01:54.433][Moby ][Info ] openvswitch: Open vSwitch switching datapath [10:01:54.446][Moby ][Info ] hv_vmbus: registering driver hv_sock [10:01:54.465][Moby ][Info ] NET: Registered protocol family 43 [10:01:54.477][Moby ][Info ] mpls_gso: MPLS GSO support [10:01:54.495][Moby ][Info ] microcode: sig=0x406e3, pf=0x1, revision=0xffffffff [10:01:54.525][Moby ][Info ] microcode: Microcode Update Driver: v2.01 tigran@aivazian.fsnet.co.uk, Peter Oruba [10:01:54.541][Moby ][Info ] AVX2 version of gcm_enc/dec engaged. [10:01:54.557][Moby ][Info ] AES CTR mode by8 optimization enabled [10:01:54.569][Moby ][Info ] registered taskstats version 1 [10:01:54.577][Moby ][Info ] Key type big_key registered [10:01:54.587][Moby ][Info ] Key type encrypted registered [10:01:54.637][Moby ][Info ] rtc_cmos 00:00: setting system clock to 2016-12-14 10:01:53 UTC (1481709713) [10:01:54.699][Moby ][Info ] Freeing unused kernel memory: 1372K (ffffffff81f5e000 - ffffffff820b5000) [10:01:54.737][Moby ][Info ] Write protecting the kernel read-only data: 14336k [10:01:54.782][Moby ][Info ] Freeing unused kernel memory: 1784K (ffff880001842000 - ffff880001a00000) [10:01:54.824][Moby ][Info ] Freeing unused kernel memory: 1248K (ffff880001cc8000 - ffff880001e00000) [10:01:54.846][Moby ][Info ] ------------[ cut here ]------------ [10:01:54.880][Moby ][Info ] WARNING: CPU: 1 PID: 0 at ./arch/x86/include/asm/fpu/internal.h:368 switch_to+0x2de/0x4b0 [10:01:54.890][Moby ][Info ] Modules linked in: [10:01:54.921][Moby ][Info ] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 4.8.12-moby #1 [10:01:54.970][Moby ][Info ] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012 [10:01:55.007][Moby ][Info ] 0000000000000086 60b65e6fa4d2efd7 ffffffff8141bb51 0000000000000000 [10:01:55.038][Moby ][Info ] 0000000000000000 ffffffff810e0362 ffff88007025ac00 ffff88007f83c100 [10:01:55.070][Moby ][Info ] 0000000000000001 0000000000000001 0000000000000000 0000000000000000 [10:01:55.079][Moby ][Info ] Call Trace: [10:01:55.084][Moby ][Info ] [10:01:55.111][Moby ][Info ] ---[ end trace fc7e19131b2e2acc ]--- [10:01:55.282][Moby ][Info ] BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 [10:01:55.303][Moby ][Info ] IP: [] task_fork_fair+0x46/0xc2 [10:01:55.308][Moby ][Info ] PGD 0 [10:01:55.317][Moby ][Info ] Oops: 0000 [#1] SMP [10:01:55.325][Moby ][Info ] Modules linked in: [10:01:55.347][Moby ][Info ] CPU: 0 PID: 326 Comm: openrc Tainted: G W 4.8.12-moby #1 [10:01:55.388][Moby ][Info ] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012 [10:01:55.406][Moby ][Info ] task: ffff880070207380 task.stack: ffff88007af34000 [10:01:55.435][Moby ][Info ] RIP: 0010:[] [] task_fork_fair+0x46/0xc2 [10:01:55.450][Moby ][Info ] RSP: 0018:ffff88007af37d98 EFLAGS: 00010016 [10:01:55.473][Moby ][Info ] RAX: ffff880070207380 RBX: ffff8800758188c0 RCX: 00000001eb94bb28 [10:01:55.498][Moby ][Info ] RDX: 0000000000044afe RSI: 00000001eb90702a RDI: 0000000000044afe [10:01:55.521][Moby ][Info ] RBP: ffff880070206a80 R08: 0000000000000002 R09: 000000000001baf4 [10:01:55.553][Moby ][Info ] R10: ffffffff81f27800 R11: 000000000001baa8 R12: ffff8800702070b4 [10:01:55.604][Moby ][Info ] R13: 0000000000000000 R14: ffff880070206b00 R15: 0000000000000011 [10:01:55.643][Moby ][Info ] FS: 00007fdeeef9fb48(0000) GS:ffff880075800000(0000) knlGS:0000000000000000 [10:01:55.670][Moby ][Info ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10:01:55.712][Moby ][Info ] CR2: 0000000000000038 CR3: 000000007bf9d000 CR4: 00000000003406b0 [10:01:55.717][Moby ][Info ] Stack: [10:01:55.758][Moby ][Info ] ffff880070206a80 0000000000000000 ffff8800702070b4 0000000000000206 [10:01:55.797][Moby ][Info ] 0000000000000000 ffffffff81101533 ffff880070206a80 ffff88007af37ec0 [10:01:55.839][Moby ][Info ] ffff880070207380 0000000000000000 ffffffff810de611 ffff88007c4006c0 [10:01:55.848][Moby ][Info ] Call Trace: [10:01:55.873][Moby ][Info ] [] ? sched_fork+0x1b9/0x232 [10:01:55.903][Moby ][Info ] [] ? copy_process.part.38+0x4ba/0x1673 [10:01:55.925][Moby ][Info ] [] ? cp_new_stat+0x151/0x180 [10:01:55.945][Moby ][Info ] [] ? _do_fork+0xce/0x286 [10:01:55.969][Moby ][Info ] [] ? __set_current_blocked+0x31/0x46 [10:01:55.994][Moby ][Info ] [] ? do_syscall_64+0x53/0x61 [10:01:56.018][Moby ][Info ] [] ? entry_SYSCALL64_slow_path+0x25/0x25 [10:01:56.166][Moby ][Info ] Code: 88 01 00 65 48 03 1d e7 15 f0 7e 48 89 df e8 d1 18 73 00 48 89 df e8 61 6d ff ff 65 48 8b 04 25 c0 d2 00 00 4c 8b a8 f8 00 00 00 <4d> 8b 65 38 4d 85 e4 74 14 4c 89 ef e8 8d fd ff ff 49 8b 44 24 [10:01:56.184][Moby ][Info ] RIP [] task_fork_fair+0x46/0xc2 [10:01:56.194][Moby ][Info ] RSP [10:01:56.202][Moby ][Info ] CR2: 0000000000000038 [10:01:56.218][Moby ][Info ] ---[ end trace fc7e19131b2e2acd ]--- [10:02:43.991][Moby ][Info ] random: crng init done [10:02:45.103][PowerMode ][Info ] Stop [10:02:45.104][HyperV ][Info ] Stop [10:02:45.107][PowerShell ][Info ] Run script with parameters: -Stop True... [10:02:45.114][HyperV ][Info ] Script started at 10:02:45.113 [10:02:45.137][HyperV ][Info ] Module loaded at 10:02:45.136 [10:02:46.034][HyperV ][Info ] Stopping VM MobyLinuxVM... [10:02:48.676][Moby ][Error ] Failed to read Moby's logs: O tempo limite da operação acabou. [10:02:48.821][HyperV ][Info ] Turn Off VM ... [10:02:48.850][HyperV ][Info ] VM MobyLinuxVM killed. Waiting for state to change [10:02:51.883][HyperV ][Info ] Killed VM MobyLinuxVM is off [10:02:51.886][HyperV ][Info ] Destroying Switch DockerNAT... [10:02:52.695][HyperV ][Info ] Removing VM MobyLinuxVM... [10:02:52.760][HyperV ][Debug ] [stop] took 00:00:07.6557496 to run [10:02:52.760][OptimizeDisk ][Info ] Optimize [10:02:52.760][PowerShell ][Info ] Run script... [10:02:52.770][Moby ][Info ] Stop [10:02:52.774][VpnKit ][Info ] Killing existing com.docker.slirp with PID 80 [10:02:52.782][DataKit ][Info ] Killing existing com.docker.db with PID 9604 [10:02:52.786][HyperV ][Info ] Destroy [10:02:52.787][PowerShell ][Info ] Run script with parameters: -Destroy True -KeepVolume True... [10:02:52.792][HyperV ][Info ] Script started at 10:02:52.792 [10:02:52.807][HyperV ][Info ] Module loaded at 10:02:52.807 [10:02:52.815][HyperV ][Info ] VM MobyLinuxVM does not exist [10:02:52.816][HyperV ][Info ] Destroying Switch DockerNAT... [10:02:52.830][HyperV ][Info ] Removing VM MobyLinuxVM... [10:02:52.838][HyperV ][Debug ] [destroy] took 00:00:00.0520045 to run [10:02:52.838][Firewall ][Info ] Closing ports... [10:02:53.951][Firewall ][Info ] Ports are closed [10:02:53.951][HyperVGuids ][Info ] Removing GUIDs... [10:02:53.953][HyperVGuids ][Info ] GUIDs removed [10:02:53.962][NamedPipeServer][Error ] Unable to execute Start: Docker hv-sock proxy (vsudd) is not reachable em Docker.Backend.ContainerEngine.Linux.ConnectToVsud(TaskCompletionSource`1 vmId) em Docker.Backend.ContainerEngine.Linux.DoStart(Settings settings) em Docker.Backend.ContainerEngine.Linux.Start(Settings settings) em Docker.Core.Pipe.NamedPipeServer.<>cDisplayClass8_0.b__0(Object[] parameters) em Docker.Core.Pipe.NamedPipeServer.RunAction(String action, Object[] parameters) [10:02:53.966][NamedPipeClient][Error ] Unable to send Start: Docker hv-sock proxy (vsudd) is not reachable [10:02:53.968][Notifications ][Error ] Docker hv-sock proxy (vsudd) is not reachable [10:02:53.981][CrashReport ][Info ] Preparing package to send with the diagnostics [10:02:53.985][NamedPipeClient][Info ] Sending DownloadVpnKitLogs(C:\Users\mchaves\AppData\Local\Temp\5b5n1wub.iqx\pcap.tar)... [10:02:53.986][NamedPipeClient][Info ] Sending GetDebugInfo()... [10:02:53.997][NamedPipeClient][Info ] Sending DownloadVmLogs(C:\Users\mchaves\AppData\Local\Temp\5b5n1wub.iqx\mobyLogs.tar)... [10:02:54.017][NamedPipeServer][Info ] GetDebugInfo() [10:02:54.085][NamedPipeClient][Info ] Received response for DownloadVmLogs [10:02:54.018][NamedPipeServer][Info ] DownloadVpnKitLogs(C:\Users\mchaves\AppData\Local\Temp\5b5n1wub.iqx\pcap.tar) [10:02:54.021][NamedPipeServer][Info ] DownloadVmLogs(C:\Users\mchaves\AppData\Local\Temp\5b5n1wub.iqx\mobyLogs.tar) [10:02:54.023][PowerShell ][Info ] Run script '(Get-VM MobyLinuxVM).Id.Guid'... [10:02:54.084][HyperV ][Warning] Unable to download logs: O comando em execução parou porque a variável preferencial "ErrorActionPreference" ou o parâmetro comum está definido como Stop: O Hyper-V não pôde localizar uma máquina virtual com o nome "MobyLinuxVM". [10:02:54.084][NamedPipeServer][Info ] DownloadVmLogs done in 00:00:00.0630052. [10:03:12.156][NamedPipeServer][Info ] GetDebugInfo done in 00:00:18.1393063. [10:03:12.160][NamedPipeClient][Info ] Received response for GetDebugInfo [10:07:34.173][ErrorReportWindow][Info ] Open logs [10:11:54.255][ErrorReportWindow][Info ] Open logs

Im sorry if the post got too long but the crash report wont get uploaded ever :(

rn commented 7 years ago

@marcospc6 you have the same issue which is tracked on @274. I added a comment there and pinged you on it

gh2k commented 7 years ago

Landed here from Google. I understand this issue is closed, but I'm wondering if anyone managed to get a solution. I'm having an issue similar to the first post here running Win10 under VMWare Workstation 12.

During boot I see:

[13:01:12.600][Moby           ][Info   ] Initmem setup node 0 [mem 0x0000000000001000-0x000000006fffffff]
[13:01:12.621][Moby           ][Info   ] ACPI: PM-Timer IO Port: 0x408
[13:01:12.639][Moby           ][Info   ] ------------[ cut here ]------------
[13:01:12.674][Moby           ][Info   ] WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic.c:2065 __generic_processor_info+0x14d/0x258
[13:01:12.713][Moby           ][Info   ] Only 127 processors supported.Processor 128/0x80 and the rest are ignored.
[13:01:12.729][Moby           ][Info   ] Modules linked in:
[13:01:12.758][Moby           ][Info   ] CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.3-moby #1
[13:01:12.799][Moby           ][Info   ] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012
[13:01:12.835][Moby           ][Info   ]  0000000000000000 ffffffff8141a0a2 ffffffff81e03d68 0000000000000000
[13:01:12.885][Moby           ][Info   ]  ffffffff810ddbaf 0000000000000080 ffffffff81e03dc8 0000000000000000
[13:01:12.907][Moby           ][Info   ]  0000000000000014 0000000000000000 ffffffff81bc2eea ffffffff810ddc22
[13:01:12.917][Moby           ][Info   ] Call Trace:
[13:01:12.936][Moby           ][Info   ]  [<ffffffff8141a0a2>] ? dump_stack+0x5a/0x6f
[13:01:12.955][Moby           ][Info   ]  [<ffffffff810ddbaf>] ? __warn+0xd2/0xeb
[13:01:12.980][Moby           ][Info   ]  [<ffffffff810ddc22>] ? warn_slowpath_fmt+0x5a/0x76
[13:01:13.007][Moby           ][Info   ]  [<ffffffff81fa549c>] ? __early_ioremap+0x13d/0x1bd
[13:01:13.029][Moby           ][Info   ]  [<ffffffff8104129f>] ? native_flush_tlb_single+0x5/0x9
[13:01:13.052][Moby           ][Info   ]  [<ffffffff81038d6f>] ? __generic_processor_info+0x14d/0x258
[13:01:13.108][Moby           ][Info   ]  [<ffffffff81035250>] ? acpi_register_lapic+0x42/0x71
[13:01:13.170][Moby           ][Info   ]  [<ffffffff81f8c388>] ? acpi_parse_lapic+0x3e/0x43
[13:01:13.200][Moby           ][Info   ]  [<ffffffff81fb5883>] ? acpi_parse_entries_array+0xf4/0x152
[13:01:13.240][Moby           ][Info   ]  [<ffffffff81fb5a44>] ? acpi_table_parse_entries_array+0xbb/0xee
[13:01:13.270][Moby           ][Info   ]  [<ffffffff81f8cd6e>] ? acpi_boot_init+0xee/0x44c
[13:01:13.290][Moby           ][Info   ]  [<ffffffff810431d1>] ? pmd_val+0x7/0x8
[13:01:13.315][Moby           ][Info   ]  [<ffffffff8104324a>] ? pmd_page_vaddr+0x9/0x36
[13:01:13.341][Moby           ][Info   ]  [<ffffffff81f8c34a>] ? acpi_parse_x2apic_nmi+0x3c/0x3c
[13:01:13.369][Moby           ][Info   ]  [<ffffffff81f8c7b2>] ? dmi_ignore_irq0_timer_override+0x26/0x26
[13:01:13.393][Moby           ][Info   ]  [<ffffffff81f86549>] ? setup_arch+0x8c8/0x967
[13:01:13.412][Moby           ][Info   ]  [<ffffffff81f7bb80>] ? start_kernel+0xa9/0x440
[13:01:13.445][Moby           ][Info   ]  [<ffffffff81f7b120>] ? early_idt_handler_array+0x120/0x120
[13:01:13.469][Moby           ][Info   ]  [<ffffffff81f7b407>] ? x86_64_start_kernel+0x13f/0x161
[13:01:13.485][Moby           ][Info   ] ---[ end trace f68728a0d3053b52 ]---
[13:01:13.509][Moby           ][Info   ] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[13:01:13.544][Moby           ][Info   ] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[13:01:13.563][Moby           ][Info   ] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[13:01:13.584][Moby           ][Info   ] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[13:01:13.605][Moby           ][Info   ] Using ACPI (MADT) for SMP configuration information
[13:01:13.620][Moby           ][Info   ] smpboot: 240 Processors exceeds NR_CPUS limit of 128
[13:01:13.635][Moby           ][Info   ] smpboot: Allowing 128 CPUs, 124 hotplug CPUs

I don't have 240 processors. I don't know if this (and the associated stacktrace) is relevant.

This results in the same error in the end:

[13:01:14.265][Moby           ][Info   ] bootconsole [earlyser0] disabled
[13:01:14.975][Moby           ][Info   ] tsc: Fast TSC calibration failed
[13:01:14.987][Moby           ][Info   ] tsc: Unable to calibrate against PIT
[13:01:15.004][Moby           ][Info   ] tsc: HPET/PMTIMER calibration failed
[13:02:10.599][NamedPipeClient][Error  ] Unable to send Restart: Docker hv-sock proxy (vsudd) is not reachable
[13:02:10.600][Notifications  ][Error  ] Docker hv-sock proxy (vsudd) is not reachable
[13:02:10.595][NamedPipeServer][Error  ] Unable to execute Restart: Docker hv-sock proxy (vsudd) is not reachable    at Docker.Backend.ContainerEngine.Linux.ConnectToVsud(TaskCompletionSource`1 vmId)
   at Docker.Backend.ContainerEngine.Linux.DoStart(Settings settings)
   at Docker.Backend.ContainerEngine.Linux.Restart(Settings settings)
   at Docker.Core.Pipe.NamedPipeServer.<>c__DisplayClass8_0.<Register>b__0(Object[] parameters)
   at Docker.Core.Pipe.NamedPipeServer.RunAction(String action, Object[] parameters)

I'm running this:

Version: 1.13.0-rc7-beta37 (9733)
Channel: Beta
Sha1: f2c3d3454f2bbc704c36b463e5fb77141b188a33
Started on: 2017/01/18 12:55:59.778
Resources: C:\Program Files\Docker\Docker\Resources
OS: Windows 10 Pro
Edition: Professional
Id: 1607
Build: 14393

rn commented 7 years ago

@gh2k do you have all windows updates installed? $PSVersionTable.BuildVersion gives you the revision number like:

Major  Minor  Build  Revision
-----  -----  -----  --------
10     0      14393  576

I suspect the issue is do do with an older Hyper-V version not quite setting up the ACPI table right.

The 240 processors are unrelated. Hyper-V just advertises them as potential number of processor, irrespective of how many are configured for the the VM (which is a bit weird, but it potentially allows CPU hotplug)

The HPET/PMTIMER calibration failed is because you are runing on top of VMWare and your system might be overall too slow.

As mentioned elsewhere we can't really support running Windows on top of VMware as we can't control or have visibility of how you configure the VM.

gh2k commented 7 years ago

Yeah, everything is up to date. The host machine is fairly beefy and I've allocated the guest 8GB of RAM.

Major  Minor  Build  Revision
-----  -----  -----  --------
10     0      14393  693

I realise it's not a particularly sane configuration. I'm writing some documentation for my team and don't have convenient access to a PC with Windows on it. I'll scrounge up a spare drive and set up dual-boot.

malmas commented 7 years ago

I have also exactly the same issue. First I had this error: "The VM couldn't get an IP address after 60 tries" After the update I installed today I get this new error: (Docker hv-sock proxy (vsudd) is not reachable).

In my logs I also see the following errors:

tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: HPET/PMTIMER calibration failed

I'm Running a Windows 10 Enterprise VM.

I am running this:

Version: 1.13.0 (9795) Channel: Stable Sha1: 0c6d765c5482987c547f4b2b68f04167ebd3f352 Started on: 2017/01/20 12:54:12.108 Resources: C:\Program Files\Docker\Docker\Resources OS: Windows 10 Enterprise Edition: Enterprise Id: 1607 Build: 14393 BuildLabName: 14393.576.amd64fre.rs1_release_inmarket.161208-2252

anongitmous commented 7 years ago

Uninstalling KB3213986 fixed this issue for me.

malmas commented 7 years ago

@anongitmous and do you also run your Windows on a VM?

anongitmous commented 7 years ago

@Malmas , yes, Windows 10 was running in a VM (VMWare 12.5.2)

malmas commented 7 years ago

@anongitmous Can you drop your Hypervisor settings? For example how many CPU's have you assigned to your Windows 10 VM? Because I still have the problem and I haven't installed update KB3213986.

anongitmous commented 7 years ago

@Malmas Server GPU 1. VMWare SVGA 3D Use this GPU with RemoteFX - grayed out Allow vms to span physical NUMA nodes - checked Simultaneous storage migrations - 2 Allow enhanced session mode - checked User Keyboard - Use on the virtual machine - selected Mouse Release Key - Ctrl-ALt-Left Arrow Use Enhanced Session mode - checked

VMWare Settings Mem - 16GB Processors - 8 (2 x 4 cores per processor) Virtualize Intel VT-x/EPT or AMD-V/RVI Network - NAT

ghostsquad commented 7 years ago

This should be reopened. I'm running Windows 10 (Host, not a guest), and this is the error that I get when starting Docker for Windows.

I had to uninstall KB3213986 as @anongitmous suggested to get docker to run.

rn commented 7 years ago

could you open a new issue with a diagnostics ID?

agusantoso commented 7 years ago

Having the same problem here diagnostic id: 39FBE76A-36D2-40D6-A6B5-14CED9A43F17/2017-02-25_19-09-00

It worked only after uninstalling KB3213986

Version: 1.13.1 (10072)
Channel: Stable
Sha1: 94675c5a765e2c51fba6c10b87e0a1a4ed3dde51
Started on: 2017/02/25 18:54:09.661
Resources: C:\Program Files\Docker\Docker\Resources
OS: Windows 10 Pro
Edition: Professional
Id: 1607
Build: 14393
BuildLabName: 14393.693.amd64fre.rs1_release.161220-1747
File: C:\Users\agus\AppData\Local\Docker\log.txt
CommandLine: "C:\Program Files\Docker\Docker\Docker for Windows.exe" 
You can send feedback, including this log file, at https://github.com/docker/for-win/issues
[18:54:09.875][GUI            ][Info   ] Starting...
[18:54:09.906][GUI            ][Error  ] An instance is already running. Exiting.
[18:54:48.599][SegmentApi     ][Info   ] Usage statistic: actionMenuCheckForUpdate
[18:54:48.600][Updater        ][Info   ] Checking for updates on channel Stable...
[18:54:48.762][Updater        ][Info   ] Local build 10072 is as good as the remote 10072 on channel Stable
[18:54:48.763][Notifications  ][Info   ] Docker is up-to-date
[18:55:07.505][SegmentApi     ][Info   ] Usage statistic: actionMenuFeedback
[18:55:08.007][NamedPipeClient][Info   ] Sending GetDefaultVhdxPath()...
[18:55:08.009][NamedPipeServer][Info   ] GetDefaultVhdxPath()
[18:55:08.016][NamedPipeClient][Info   ] Received response for GetDefaultVhdxPath
[18:55:08.016][NamedPipeServer][Info   ] GetDefaultVhdxPath done in 00:00:00.0070009.
[18:55:22.917][NamedPipeClient][Info   ] Sending GetDefaultVhdxPath()...
[18:55:22.918][NamedPipeServer][Info   ] GetDefaultVhdxPath()
[18:55:22.921][NamedPipeClient][Info   ] Received response for GetDefaultVhdxPath
[18:55:22.921][NamedPipeServer][Info   ] GetDefaultVhdxPath done in 00:00:00.0030047.
[18:55:26.460][NamedPipeClient][Info   ] Sending GetDefaultVhdxPath()...
[18:55:26.463][NamedPipeClient][Info   ] Received response for GetDefaultVhdxPath
[18:55:26.461][NamedPipeServer][Info   ] GetDefaultVhdxPath()
[18:55:26.462][NamedPipeServer][Info   ] GetDefaultVhdxPath done in 00:00:00.0014960.
[18:55:27.039][NamedPipeClient][Info   ] Sending GetDefaultVhdxPath()...
[18:55:27.040][NamedPipeServer][Info   ] GetDefaultVhdxPath()
[18:55:27.049][NamedPipeClient][Info   ] Received response for GetDefaultVhdxPath
[18:55:27.049][NamedPipeServer][Info   ] GetDefaultVhdxPath done in 00:00:00.0089980.
[18:55:32.420][NamedPipeClient][Info   ] Sending GetDefaultVhdxPath()...
[18:55:32.423][NamedPipeServer][Info   ] GetDefaultVhdxPath()
[18:55:32.429][NamedPipeClient][Info   ] Received response for GetDefaultVhdxPath
[18:55:32.429][NamedPipeServer][Info   ] GetDefaultVhdxPath done in 00:00:00.0060026.
[18:55:48.321][Notifications  ][Info   ] Docker is restarting...
[18:55:48.354][NamedPipeClient][Info   ] Sending Restart(Docker.Core.Settings)...
[18:55:48.355][NamedPipeServer][Info   ] Restart(Docker.Core.Settings)
[18:55:48.356][PowerMode      ][Info   ] Stop
[18:55:48.356][HyperV         ][Info   ] Stop
[18:55:48.374][PowerShell     ][Info   ] Run script with parameters: -Stop True...
[18:55:48.402][HyperV         ][Info   ] Script started at 18:55:48.402
[18:55:48.431][HyperV         ][Info   ] Module loaded at 18:55:48.431
[18:55:48.461][HyperV         ][Info   ] VM MobyLinuxVM does not exist
[18:55:48.461][HyperV         ][Debug  ] [stop] took 00:00:00.1050192 to run
[18:55:48.461][OptimizeDisk   ][Info   ] Optimize
[18:55:48.461][PowerShell     ][Info   ] Run script...
[18:55:48.488][Moby           ][Info   ] Stop
[18:55:48.515][PowerMode      ][Info   ] Stop
[18:55:48.515][HyperV         ][Info   ] Stop
[18:55:48.516][PowerShell     ][Info   ] Run script with parameters: -Stop True...
[18:55:48.532][HyperV         ][Info   ] Script started at 18:55:48.531
[18:55:48.547][HyperV         ][Info   ] Module loaded at 18:55:48.546
[18:55:48.572][HyperV         ][Info   ] VM MobyLinuxVM does not exist
[18:55:48.572][HyperV         ][Debug  ] [stop] took 00:00:00.0570069 to run
[18:55:48.572][OptimizeDisk   ][Info   ] Optimize
[18:55:48.572][PowerShell     ][Info   ] Run script...
[18:55:48.592][Moby           ][Info   ] Stop
[18:55:48.620][HyperVGuids    ][Info   ] Installing GUIDs...
[18:55:48.620][HyperV         ][Info   ] Create
[18:55:48.620][Firewall       ][Info   ] Removing all existing rules...
[18:55:48.620][PowerMode      ][Info   ] Start
[18:55:48.620][PowerShell     ][Info   ] Run script with parameters: -Create True -VhdPathOverride  -SwitchSubnetAddress 10.0.75.0 -SwitchSubnetMaskSize 24 -CPUs 2 -Memory 2048 -IsoFile C:\Program Files\Docker\Docker\Resources\mobylinux.iso...
[18:55:48.621][HyperVGuids    ][Info   ] GUIDs installed
[18:55:48.647][HyperV         ][Info   ] Script started at 18:55:48.647
[18:55:48.677][HyperV         ][Info   ] Module loaded at 18:55:48.677
[18:55:49.034][HyperV         ][Info   ] Creating Switch: DockerNAT...
[18:55:49.639][Firewall       ][Info   ] All existing rules are removed.
[18:55:49.639][Firewall       ][Info   ] Opening ports for C:\Program Files\Docker\Docker\Resources\com.docker.proxy.exe...
[18:55:51.845][HyperV         ][Info   ] Switch created.
[18:55:52.671][HyperV         ][Info   ] Set IP address on switch
[18:55:52.734][HyperV         ][Info   ] Creating VM MobyLinuxVM...
[18:55:53.998][HyperV         ][Info   ] Setting CPUs to 2 and Memory to 2048 MB
[18:55:54.405][HyperV         ][Info   ] Attach VHD C:\Users\Public\Documents\Hyper-V\Virtual Hard Disks\MobyLinuxVM.vhdx
[18:55:55.118][Firewall       ][Info   ] Opening ports for SMB...
[18:55:55.252][HyperV         ][Info   ] Connect Internal Switch DockerNAT
[18:55:55.642][HyperV         ][Info   ] Attach DVD C:\Program Files\Docker\Docker\Resources\mobylinux.iso
[18:55:57.140][Firewall       ][Info   ] Ports are opened
[18:55:57.454][HyperV         ][Info   ] VM created.
[18:55:57.454][HyperV         ][Debug  ] [create] took 00:00:08.8346228 to run
[18:55:57.454][PowerShell     ][Info   ] Run script '(Get-VM MobyLinuxVM).Id.Guid'...
[18:55:57.531][DataKit        ][Info   ] Starting C:\Program Files\Docker\Docker\Resources\com.docker.db.exe --url hyperv-connect://cde17a14-54bf-4e71-b5dc-0393d362ebd3,\\.\pipe\dockerDataBase --color never
[18:55:57.626][DataKit        ][Info   ] Started
[18:55:57.626][Database       ][Info   ] Generating CA Cert Bundle
[18:55:57.678][Database       ][Info   ] CA Cert Bundle Generated
[18:55:57.758][DataKit        ][Info   ] Starting com.docker.db.exe 0.7.0-34-g6f04213 ...
[18:55:57.765][Database       ][Info   ] Writing com.docker.driver.amd64-linux/net/config=static
[18:55:57.765][Database       ][Info   ] Writing com.docker.driver.amd64-linux/net/address=10.0.75.2
[18:55:57.765][Database       ][Info   ] Writing com.docker.driver.amd64-linux/net/netmask=255.255.255.0
[18:55:57.765][Database       ][Info   ] Writing com.docker.driver.amd64-linux/net/gateway=10.0.75.1
[18:55:57.765][Database       ][Info   ] Writing com.docker.driver.amd64-linux/network=hybrid
[18:55:57.765][Database       ][Info   ] Writing com.docker.driver.amd64-linux/etc/docker/daemon.json={"registry-mirrors":[],"insecure-registries":[]}
[18:55:57.765][Database       ][Info   ] Writing com.docker.driver.amd64-linux/etc/sysctl.conf=
[18:55:57.765][Database       ][Info   ] Writing com.docker.driver.amd64-linux/native/port-forwarding=true
[18:55:57.765][DataKit        ][Info   ] com.docker.db.exe: accepted a new connection on \\.\pipe\dockerDataBase
[18:55:57.918][DataKit        ][Info   ] com.docker.db.exe: accepted a new connection on \\.\pipe\dockerDataBase
[18:55:57.919][DataKit        ][Info   ] com.docker.db.exe: Using protocol TwoThousand msize 16384
[18:55:58.666][Database       ][Info   ] Successfully wrote 8 value(s)
[18:55:58.666][Database       ][Info   ] Writing com.docker.driver.amd64-linux/etc/ssl/certs/ca-certificates.crt=C:\WINDOWS\TEMP\tmp6D92.tmp
[18:55:58.724][DataKit        ][Info   ] com.docker.db.exe: accepted a new connection on \\.\pipe\dockerDataBase
[18:55:58.724][DataKit        ][Info   ] com.docker.db.exe: Using protocol TwoThousand msize 16384
[18:55:58.965][Database       ][Info   ] Successfully wrote value
[18:55:58.966][Moby           ][Info   ] Connecting...
[18:55:58.967][Moby           ][Error  ] Failed to read Moby's logs: The operation has timed out.
[18:55:58.967][HyperV         ][Info   ] Start
[18:55:58.968][PowerShell     ][Info   ] Run script '$(Find-NetRoute -RemoteIPAddress 8.8.8.8).InterfaceIndex[0]'...
[18:55:58.970][PowerShell     ][Info   ] Run script with parameters: -Start True...
[18:55:59.004][HyperV         ][Info   ] Script started at 18:55:59.003
[18:55:59.039][HyperV         ][Info   ] Module loaded at 18:55:59.039
[18:55:59.048][HyperV         ][Info   ] Starting VM MobyLinuxVM...
[18:55:59.077][Database       ][Info   ] Writing com.docker.driver.amd64-linux/slirp/dns=nameserver 8.8.8.8
nameserver 8.8.4.4
nameserver 8.8.8.8
nameserver 8.8.4.4
[18:55:59.123][DataKit        ][Info   ] com.docker.db.exe: accepted a new connection on \\.\pipe\dockerDataBase
[18:55:59.124][DataKit        ][Info   ] com.docker.db.exe: Using protocol TwoThousand msize 16384
[18:55:59.419][Database       ][Info   ] Successfully wrote 1 value(s)
[18:55:59.521][VpnKit         ][Info   ] Starting C:\Program Files\Docker\Docker\Resources\com.docker.slirp.exe --ethernet hyperv-connect://cde17a14-54bf-4e71-b5dc-0393d362ebd3 --port hyperv-connect://cde17a14-54bf-4e71-b5dc-0393d362ebd3 --db \\.\pipe\dockerDataBase --debug --diagnostics \\.\pipe\dockerVpnKitDiagnostics
[18:55:59.612][VpnKit         ][Info   ] Started
[18:55:59.664][VpnKit         ][Info   ] com.docker.slirp.exe: Logging to stdout (stdout:true DEBUG:false)
[18:55:59.664][VpnKit         ][Info   ] com.docker.slirp.exe: Setting handler to ignore all SIGPIPE signals
[18:55:59.664][VpnKit         ][Info   ] com.docker.slirp.exe: vpnkit version %VERSION% with hostnet version  %HOSTNET_PINNED% uwt version 0.0.3 hvsock version 0.11.2 %HVSOCK_PINNED%
[18:55:59.664][VpnKit         ][Info   ] com.docker.slirp.exe: starting port forwarding server on port_control_url:hyperv-connect://cde17a14-54bf-4e71-b5dc-0393d362ebd3 vsock_path:
[18:55:59.664][VpnKit         ][Info   ] com.docker.slirp.exe: connecting to cde17a14-54bf-4e71-b5dc-0393d362ebd3:0B95756A-9985-48AD-9470-78E060895BE7
[18:55:59.671][VpnKit         ][Info   ] com.docker.slirp.exe: connecting to cde17a14-54bf-4e71-b5dc-0393d362ebd3:30D48B34-7D27-4B0B-AAAF-BBBED334DD59
[18:55:59.672][VpnKit         ][Error  ] com.docker.slirp.exe: While watching /etc/resolv.conf: ENOENT
[18:55:59.673][VpnKit         ][Info   ] com.docker.slirp.exe: hosts file has bindings for 
[18:56:08.039][HyperV         ][Debug  ] [start] took 00:00:09.0716557 to run
[18:56:08.039][Linux          ][Info   ] Trying to connect to vsud...
[18:56:08.990][Moby           ][Info   ] Connected
[18:56:09.739][Moby           ][Error  ] Failed to read Moby's logs: The operation has timed out.
[18:56:11.754][Moby           ][Info   ] Connected
[18:56:14.682][Moby           ][Info   ] done.
[18:56:14.684][Moby           ][Info   ] Booting the kernel.
[18:56:14.738][Moby           ][Info   ] Linux version 4.9.8-moby (root@1d811a9194c4) (gcc version 5.3.0 (Alpine 5.3.0) ) #1 SMP Wed Feb 8 09:56:43 UTC 2017
[18:56:14.786][Moby           ][Info   ] Command line: earlyprintk=ttyS0,115200 console=ttyS0,115200 mobyplatform=windows vsyscall=emulate rootdelay=300 noautodetect
[18:56:14.787][Moby           ][Info   ] 
[18:56:14.812][Moby           ][Info   ] x86/fpu: Legacy x87 FPU detected.
[18:56:14.831][Moby           ][Info   ] x86/fpu: Using 'eager' FPU context switches.
[18:56:14.857][Moby           ][Info   ] e820: BIOS-provided physical RAM map:
[18:56:14.874][Moby           ][Info   ] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[18:56:14.878][Moby           ][Info   ] BIOS-e820: [mem 0x0000000000100000-0x000000007eeedfff] usable
[18:56:14.936][Moby           ][Info   ] BIOS-e820: [mem 0x000000007eeee000-0x000000007eef1fff] ACPI data
[18:56:14.949][Moby           ][Info   ] BIOS-e820: [mem 0x000000007eef2000-0x000000007ef1afff] reserved
[18:56:14.968][Moby           ][Info   ] BIOS-e820: [mem 0x000000007ef1b000-0x000000007ff9afff] usable
[18:56:14.980][Moby           ][Info   ] BIOS-e820: [mem 0x000000007ff9b000-0x000000007fff2fff] reserved
[18:56:14.996][Moby           ][Info   ] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffafff] ACPI data
[18:56:15.013][Moby           ][Info   ] BIOS-e820: [mem 0x000000007fffb000-0x000000007fffefff] ACPI NVS
[18:56:15.032][Moby           ][Info   ] BIOS-e820: [mem 0x000000007ffff000-0x000000007fffffff] usable
[18:56:15.053][Moby           ][Info   ] bootconsole [earlyser0] enabled
[18:56:15.060][Moby           ][Info   ] NX (Execute Disable) protection: active
[18:56:15.088][Moby           ][Info   ] efi: EFI v2.31 by EDK II
[18:56:15.181][Moby           ][Info   ] efi:  ACPI=0x7fffa000  ACPI 2.0=0x7fffa014  SMBIOS=0x7fff2000  PROP=0x7fb93d8  MEMATTR=0x7f51cd18 
[18:56:15.192][Moby           ][Info   ] SMBIOS 2.4 present.
[18:56:15.237][Moby           ][Info   ] Hypervisor detected: Microsoft HyperV
[18:56:15.265][Moby           ][Info   ] HyperV: features 0x2e7f, hints 0x2c2c
[18:56:15.283][Moby           ][Info   ] HyperV: LAPIC Timer Frequency: 0x1e8480
[18:56:15.320][Moby           ][Info   ] clocksource: hyperv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
[18:56:15.346][Moby           ][Info   ] tsc: Marking TSC unstable due to running on Hyper-V
[18:56:15.368][Moby           ][Info   ] e820: last_pfn = 0x80000 max_arch_pfn = 0x400000000
[18:56:15.409][Moby           ][Info   ] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[18:56:15.439][Moby           ][Info   ] Using GB pages for direct mapping
[18:56:15.511][Moby           ][Info   ] RAMDISK: [mem 0x77f05000-0x7b3e6fff]
[18:56:15.551][Moby           ][Info   ] ACPI: Early table checksum verification disabled
[18:56:15.574][Moby           ][Info   ] ACPI: RSDP 0x000000007FFFA014 000024 (v02 VRTUAL)
[18:56:15.602][Moby           ][Info   ] ACPI: XSDT 0x000000007FFF90E8 00005C (v01 VRTUAL MICROSFT 00000001 MSFT 00000001)
[18:56:15.670][Moby           ][Info   ] ACPI: FACP 0x000000007FFF7000 0000F4 (v04 VRTUAL MICROSFT 00000001 MSFT 00000001)
[18:56:15.712][Moby           ][Info   ] ACPI: DSDT 0x000000007EEEF000 00256F (v02 MSFTVM DSDT01   00000001 MSFT 04000000)
[18:56:15.755][Moby           ][Info   ] ACPI: FACS 0x000000007FFFE000 000040
[18:56:15.803][Moby           ][Info   ] ACPI: APIC 0x000000007FFF8000 0007D2 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001)
[18:56:15.864][Moby           ][Info   ] ACPI: OEM0 0x000000007FFF6000 000064 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001)
[18:56:15.971][Moby           ][Info   ] ACPI: WAET 0x000000007FFF5000 000028 (v01 VRTUAL MICROSFT 00000001 MSFT 00000001)
[18:56:16.000][Moby           ][Info   ] ACPI: OEM1 0x000000007FFF4000 00009E (v02 MSFTVM UARTS    00000001 MSFT 04000000)
[18:56:16.086][Moby           ][Info   ] ACPI: OEM2 0x000000007FFF3000 0002E2 (v02 MSFTVM VTPM2    00000001 MSFT 04000000)
[18:56:16.106][Moby           ][Info   ] ACPI: SRAT 0x000000007EEEE000 000190 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001)
[18:56:16.216][Moby           ][Info   ] Zone ranges:
[18:56:16.237][Moby           ][Info   ]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[18:56:16.262][Moby           ][Info   ]   DMA32    [mem 0x0000000001000000-0x000000007fffffff]
[18:56:16.290][Moby           ][Info   ]   Normal   empty
[18:56:16.307][Moby           ][Info   ] Movable zone start for each node
[18:56:16.324][Moby           ][Info   ] Early memory node ranges
[18:56:16.336][Moby           ][Info   ]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[18:56:16.347][Moby           ][Info   ]   node   0: [mem 0x0000000000100000-0x000000007eeedfff]
[18:56:16.353][Moby           ][Info   ]   node   0: [mem 0x000000007ef1b000-0x000000007ff9afff]
[18:56:16.366][Moby           ][Info   ]   node   0: [mem 0x000000007ffff000-0x000000007fffffff]
[18:56:16.382][Moby           ][Info   ] Initmem setup node 0 [mem 0x0000000000001000-0x000000007fffffff]
[18:56:16.414][Moby           ][Info   ] ACPI: PM-Timer IO Port: 0x408
[18:56:16.422][Moby           ][Info   ] ------------[ cut here ]------------
[18:56:16.437][Moby           ][Info   ] WARNING: CPU: 0 PID: 0 at arch/x86/kernel/apic/apic.c:2065 __generic_processor_info+0x14d/0x258
[18:56:16.461][Moby           ][Info   ] Only 127 processors supported.Processor 128/0x80 and the rest are ignored.
[18:56:16.480][Moby           ][Info   ] Modules linked in:
[18:56:16.501][Moby           ][Info   ] CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.8-moby #1
[18:56:16.516][Moby           ][Info   ] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v1.0 11/26/2012
[18:56:16.564][Moby           ][Info   ]  0000000000000000 ffffffff8141a4a5 ffffffff81e03d68 0000000000000000
[18:56:16.641][Moby           ][Info   ]  ffffffff810ddb53 0000000000000080 ffffffff81e03dc8 0000000000000000
[18:56:16.689][Moby           ][Info   ]  0000000000000014 0000000000000000 ffffffff81bc3173 ffffffff810ddbc6
[18:56:16.700][Moby           ][Info   ] Call Trace:
[18:56:16.704][Moby           ][Info   ]  [<ffffffff8141a4a5>] ? dump_stack+0x5a/0x6f
[18:56:16.730][Moby           ][Info   ]  [<ffffffff810ddb53>] ? __warn+0xd2/0xeb
[18:56:16.736][Moby           ][Info   ]  [<ffffffff810ddbc6>] ? warn_slowpath_fmt+0x5a/0x76
[18:56:16.746][Moby           ][Info   ]  [<ffffffff81fa564b>] ? __early_ioremap+0x13d/0x1bd
[18:56:16.753][Moby           ][Info   ]  [<ffffffff81041244>] ? native_flush_tlb_single+0x5/0x9
[18:56:16.767][Moby           ][Info   ]  [<ffffffff81038d14>] ? __generic_processor_info+0x14d/0x258
[18:56:16.778][Moby           ][Info   ]  [<ffffffff810351f5>] ? acpi_register_lapic+0x42/0x71
[18:56:16.798][Moby           ][Info   ]  [<ffffffff81f8c388>] ? acpi_parse_lapic+0x3e/0x43
[18:56:16.813][Moby           ][Info   ]  [<ffffffff81fb5a5a>] ? acpi_parse_entries_array+0xf4/0x152
[18:56:16.823][Moby           ][Info   ]  [<ffffffff81fb5c1b>] ? acpi_table_parse_entries_array+0xbb/0xee
[18:56:16.830][Moby           ][Info   ]  [<ffffffff81f8cd6e>] ? acpi_boot_init+0xee/0x44c
[18:56:16.844][Moby           ][Info   ]  [<ffffffff81043176>] ? pmd_val+0x7/0x8
[18:56:16.850][Moby           ][Info   ]  [<ffffffff810431ef>] ? pmd_page_vaddr+0x9/0x36
[18:56:16.858][Moby           ][Info   ]  [<ffffffff81f8c34a>] ? acpi_parse_x2apic_nmi+0x3c/0x3c
[18:56:16.872][Moby           ][Info   ]  [<ffffffff81f8c7b2>] ? dmi_ignore_irq0_timer_override+0x26/0x26
[18:56:16.887][Moby           ][Info   ]  [<ffffffff81f86549>] ? setup_arch+0x8c8/0x967
[18:56:16.898][Moby           ][Info   ]  [<ffffffff81f7bb80>] ? start_kernel+0xa9/0x440
[18:56:16.914][Moby           ][Info   ]  [<ffffffff81f7b120>] ? early_idt_handler_array+0x120/0x120
[18:56:16.927][Moby           ][Info   ]  [<ffffffff81f7b407>] ? x86_64_start_kernel+0x13f/0x161
[18:56:16.933][Moby           ][Info   ] ---[ end trace f68728a0d3053b52 ]---
[18:56:16.944][Moby           ][Info   ] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[18:56:16.979][Moby           ][Info   ] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[18:56:16.992][Moby           ][Info   ] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[18:56:17.009][Moby           ][Info   ] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[18:56:17.016][Moby           ][Info   ] Using ACPI (MADT) for SMP configuration information
[18:56:17.036][Moby           ][Info   ] smpboot: 240 Processors exceeds NR_CPUS limit of 128
[18:56:17.049][Moby           ][Info   ] smpboot: Allowing 128 CPUs, 126 hotplug CPUs
[18:56:17.075][Moby           ][Info   ] e820: [mem 0x80000000-0xffffffff] available for PCI devices
[18:56:17.085][Moby           ][Info   ] Booting paravirtualized kernel on bare hardware
[18:56:17.109][Moby           ][Info   ] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[18:56:17.120][Moby           ][Info   ] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:128 nr_node_ids:1
[18:56:17.173][Moby           ][Info   ] percpu: Embedded 35 pages/cpu @ffff880075e00000 s105112 r8192 d30056 u262144
[18:56:17.179][Moby           ][Info   ] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 515799
[18:56:17.225][Moby           ][Info   ] Kernel command line: earlyprintk=ttyS0,115200 console=ttyS0,115200 mobyplatform=windows vsyscall=emulate rootdelay=300 noautodetect
[18:56:17.225][Moby           ][Info   ] 
[18:56:17.253][Moby           ][Info   ] log_buf_len individual max cpu contribution: 4096 bytes
[18:56:17.299][Moby           ][Info   ] log_buf_len total cpu_extra contributions: 520192 bytes
[18:56:17.332][Moby           ][Info   ] log_buf_len min size: 131072 bytes
[18:56:17.345][Moby           ][Info   ] log_buf_len: 1048576 bytes
[18:56:17.359][Moby           ][Info   ] early log buf free: 120964(92%)
[18:56:17.372][Moby           ][Info   ] PID hash table entries: 4096 (order: 3, 32768 bytes)
[18:56:17.397][Moby           ][Info   ] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[18:56:17.409][Moby           ][Info   ] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[18:56:17.473][Moby           ][Info   ] Memory: 1890464K/2096184K available (8467K kernel code, 1407K rwdata, 2848K rodata, 1380K init, 584K bss, 205720K reserved, 0K cma-reserved)
[18:56:17.491][Moby           ][Info   ] Hierarchical RCU implementation.
[18:56:17.507][Moby           ][Info   ]    Build-time adjustment of leaf fanout to 64.
[18:56:17.520][Moby           ][Info   ] Using NULL legacy PIC
[18:56:17.529][Moby           ][Info   ] NR_IRQS:8448 nr_irqs:1448 0
[18:56:17.539][Moby           ][Info   ] Console: colour dummy device 80x25
[18:56:17.555][Moby           ][Info   ] console [ttyS0] enabled
[18:56:17.556][Moby           ][Info   ] console [ttyS0] enabled
[18:56:17.567][Moby           ][Info   ] bootconsole [earlyser0] disabled
[18:56:17.569][Moby           ][Info   ] bootconsole [earlyser0] disabled
[18:56:17.711][Moby           ][Info   ] tsc: Fast TSC calibration failed
[18:56:17.731][Moby           ][Info   ] tsc: Unable to calibrate against PIT
[18:56:17.755][Moby           ][Info   ] tsc: using PMTIMER reference calibration
[18:56:17.772][Moby           ][Info   ] tsc: Detected 2822.938 MHz processor
[18:56:17.812][Moby           ][Info   ] Calibrating delay loop (skipped), value calculated using timer frequency.. 5645.87 BogoMIPS (lpj=28229380)
[18:56:17.824][Moby           ][Info   ] pid_max: default: 131072 minimum: 1024
[18:56:17.833][Moby           ][Info   ] ACPI: Core revision 20160831
[18:56:17.862][Moby           ][Info   ] ACPI: 1 ACPI AML tables successfully acquired and loaded
[18:56:17.904][Moby           ][Info   ] Security Framework initialized
[18:56:17.925][Moby           ][Info   ] Yama: becoming mindful.
[18:56:17.936][Moby           ][Info   ] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[18:56:17.943][Moby           ][Info   ] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[18:56:17.962][Moby           ][Info   ] CPU: Physical Processor ID: 0
[18:56:17.970][Moby           ][Info   ] CPU: Processor Core ID: 0
[18:56:17.983][Moby           ][Info   ] process: using AMD E400 aware idle routine
[18:56:18.000][Moby           ][Info   ] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[18:56:18.021][Moby           ][Info   ] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[18:56:18.036][Moby           ][Info   ] Freeing SMP alternatives memory: 24K (ffffffff820ba000 - ffffffff820c0000)
[18:56:18.063][Moby           ][Info   ] ftrace: allocating 37494 entries in 147 pages
[18:56:18.702][Moby           ][Info   ] smpboot: Max logical packages: 120
[18:56:19.085][Moby           ][Info   ] Switched APIC routing to physical flat.
[18:56:20.529][Moby           ][Info   ] smpboot: CPU0: AMD Phenom(tm) II X6 1065T Processor (family: 0x10, model: 0xa, stepping: 0x0)
[18:56:21.016][Moby           ][Info   ] Performance Events: PMU not available due to virtualization, using software events only.
[18:56:21.346][Moby           ][Info   ] NMI watchdog: disabled (cpu0): hardware events not enabled
[18:56:22.321][Moby           ][Info   ] NMI watchdog: Shutting down hard lockup detector on all cpus
[18:56:22.814][Moby           ][Info   ] x86: Booting SMP configuration:
[18:56:24.980][Moby           ][Info   ] .... node  #0, CPUs:          #1calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
[18:56:26.589][Moby           ][Info   ] Probably due to long platform interrupts. Consider using "lpj=" boot option.
[18:56:27.366][Moby           ][Info   ] x86: Booted up 1 node, 2 CPUs
[18:56:28.098][Moby           ][Info   ] smpboot: Total of 2 processors activated (8065.79 BogoMIPS)
[18:56:28.325][Moby           ][Info   ] devtmpfs: initialized
[18:56:28.831][Moby           ][Info   ] x86/mm: Memory block size: 128MB
[18:56:30.508][Moby           ][Info   ] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[18:56:31.221][Moby           ][Info   ] NET: Registered protocol family 16
[18:56:31.657][Moby           ][Info   ] cpuidle: using governor ladder
[18:56:32.114][Moby           ][Info   ] cpuidle: using governor menu
[18:56:32.372][Moby           ][Info   ] ACPI: bus type PCI registered
[18:56:32.948][Moby           ][Info   ] PCI: Fatal: No config space access function found
[18:56:34.111][Moby           ][Info   ] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[18:56:35.147][Moby           ][Info   ] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[18:56:35.664][Moby           ][Info   ] ACPI: Added _OSI(Module Device)
[18:56:36.002][Moby           ][Info   ] ACPI: Added _OSI(Processor Device)
[18:56:36.839][Moby           ][Info   ] ACPI: Added _OSI(3.0 _SCP Extensions)
[18:56:37.705][Moby           ][Info   ] ACPI: Added _OSI(Processor Aggregator Device)
[18:56:38.942][Moby           ][Info   ] ACPI: Executed 1 blocks of module-level executable AML code
[18:56:39.319][Moby           ][Info   ] ACPI: Dynamic OEM Table Load:
[18:56:39.926][Moby           ][Info   ] ACPI: Interpreter enabled
[18:56:40.466][Moby           ][Info   ] ACPI: (supports S0 S5)
[18:56:41.046][Moby           ][Info   ] ACPI: Using IOAPIC for interrupt routing
[18:56:42.454][Moby           ][Info   ] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[18:56:43.082][Moby           ][Info   ] ACPI: Enabled 1 GPEs in block 00 to 0F
[18:56:43.673][Moby           ][Info   ] SCSI subsystem initialized
[18:56:44.361][Moby           ][Info   ] pps_core: LinuxPPS API ver. 1 registered
[18:56:45.999][Moby           ][Info   ] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[18:56:46.328][Moby           ][Info   ] PTP clock support registered
[18:56:46.799][Moby           ][Info   ] Registered efivars operations
[18:56:47.236][Moby           ][Info   ] wmi: Mapper loaded
[18:56:48.965][Moby           ][Info   ] clocksource: hyperv_clocksource_tsc_page: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
[18:56:49.722][Moby           ][Info   ] hv_vmbus: Hyper-V Host Build:14393-10.0-0-0.576; Vmbus version:4.0
[18:56:50.226][Moby           ][Info   ] PCI: Using ACPI for IRQ routing
[18:56:50.782][Moby           ][Info   ] PCI: System does not support PCI
[18:56:51.265][Moby           ][Info   ] NetLabel: Initializing
[18:56:51.768][Moby           ][Info   ] NetLabel:  domain hash size = 128
[18:56:52.212][Moby           ][Info   ] NetLabel:  protocols = UNLABELED CIPSOv4
[18:56:52.920][Moby           ][Info   ] NetLabel:  unlabeled traffic allowed by default
[18:56:53.232][Moby           ][Info   ] clocksource: Switched to clocksource hyperv_clocksource_tsc_page
[18:56:53.424][Moby           ][Info   ] FS-Cache: Loaded
[18:56:53.488][Moby           ][Info   ] CacheFiles: Loaded
[18:56:53.657][Moby           ][Info   ] pnp: PnP ACPI init
[18:56:53.994][Moby           ][Info   ] pnp: PnP ACPI: found 3 devices
[18:56:55.289][Moby           ][Info   ] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[18:56:55.806][Moby           ][Info   ] NET: Registered protocol family 2
[18:56:56.489][Moby           ][Info   ] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[18:56:57.643][Moby           ][Info   ] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[18:56:58.783][Moby           ][Info   ] TCP: Hash tables configured (established 16384 bind 16384)
[18:56:59.131][Moby           ][Info   ] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[18:56:59.732][Moby           ][Info   ] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[18:57:00.222][Moby           ][Info   ] NET: Registered protocol family 1
[18:57:00.446][Moby           ][Info   ] RPC: Registered named UNIX socket transport module.
[18:57:00.549][Moby           ][Info   ] RPC: Registered udp transport module.
[18:57:00.643][Moby           ][Info   ] RPC: Registered tcp transport module.
[18:57:01.510][Moby           ][Info   ] RPC: Registered tcp NFSv4.1 backchannel transport module.
[18:57:01.844][Moby           ][Info   ] Unpacking initramfs...
[18:57:04.220][Moby           ][Info   ] Freeing initrd memory: 54152K (ffff880077f05000 - ffff88007b3e7000)
[18:57:05.709][Moby           ][Info   ] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28b0e52f7d8, max_idle_ns: 440795256181 ns
[18:57:06.509][Moby           ][Info   ] PCLMULQDQ-NI instructions are not detected.
[18:57:07.155][Moby           ][Info   ] AVX or AES-NI instructions are not detected.
[18:57:07.740][Moby           ][Info   ] CPU feature 'AVX registers' is not supported.
[18:57:08.168][NamedPipeClient][Error  ] Unable to send Restart: Docker hv-sock proxy (vsudd) is not reachable
[18:57:08.168][Notifications  ][Error  ] Docker hv-sock proxy (vsudd) is not reachable
[18:57:08.167][NamedPipeServer][Error  ] Unable to execute Restart: Docker hv-sock proxy (vsudd) is not reachable    at Docker.Backend.ContainerEngine.Linux.ConnectToVsud(TaskCompletionSource`1 vmId)
   at Docker.Backend.ContainerEngine.Linux.DoStart(Settings settings)
   at Docker.Backend.ContainerEngine.Linux.Restart(Settings settings)
   at Docker.Core.Pipe.NamedPipeServer.<>c__DisplayClass8_0.<Register>b__0(Object[] parameters)
   at Docker.Core.Pipe.NamedPipeServer.RunAction(String action, Object[] parameters)
[18:57:08.261][Moby           ][Info   ] CPU feature 'AVX registers' is not supported.
[18:57:09.027][Moby           ][Info   ] CPU feature 'AVX registers' is not supported.
[18:57:09.884][Moby           ][Info   ] CPU feature 'AVX registers' is not supported.
[18:57:10.482][Moby           ][Info   ] AVX2 or AES-NI instructions are not detected.
[18:57:10.975][Moby           ][Info   ] AVX2 instructions are not detected.
[18:57:11.323][Moby           ][Info   ] random: fast init done
[18:57:12.313][Moby           ][Info   ] futex hash table entries: 32768 (order: 9, 2097152 bytes)
[18:57:13.000][Moby           ][Info   ] audit: initializing netlink subsys (disabled)
[18:57:13.387][Moby           ][Info   ] audit: type=2000 audit(1488048997.100:1): initialized
[18:57:13.856][Moby           ][Info   ] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[18:57:14.628][Moby           ][Info   ] FS-Cache: Netfs 'nfs' registered for caching
[18:57:15.311][Moby           ][Info   ] NFS: Registering the id_resolver key type
[18:57:15.599][Moby           ][Info   ] Key type id_resolver registered
[18:57:15.953][Moby           ][Info   ] Key type id_legacy registered
[18:57:16.546][Moby           ][Info   ] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[18:57:17.418][Moby           ][Info   ] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[18:57:17.868][Moby           ][Info   ] FS-Cache: Netfs 'cifs' registered for caching
[18:57:18.185][Moby           ][Info   ] ntfs: driver 2.1.32 [Flags: R/O].
[18:57:18.601][Moby           ][Info   ] fuse init (API version 7.26)
[18:57:19.048][Moby           ][Info   ] 9p: Installing v9fs 9p2000 file system support
[18:57:19.576][Moby           ][Info   ] FS-Cache: Netfs '9p' registered for caching
[18:57:19.833][Moby           ][Info   ] aufs 4.9-20170206
[18:57:20.216][Moby           ][Info   ] NET: Registered protocol family 38
[18:57:20.492][Moby           ][Info   ] Key type asymmetric registered
[18:57:20.819][Moby           ][Info   ] Asymmetric key parser 'x509' registered
[18:57:21.551][Moby           ][Info   ] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[18:57:21.975][Moby           ][Info   ] io scheduler noop registered
[18:57:22.572][Moby           ][Info   ] io scheduler deadline registered (default)
[18:57:22.711][Moby           ][Info   ] io scheduler cfq registered
[18:57:23.268][Moby           ][Info   ] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[18:57:23.720][Moby           ][Info   ] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[18:57:24.256][Moby           ][Info   ] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[18:57:24.745][Moby           ][Info   ] hv_vmbus: registering driver hyperv_fb
[18:57:25.096][Moby           ][Info   ] GHES: HEST is not enabled!
[18:57:25.658][Moby           ][Info   ] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[18:57:28.568][Moby           ][Info   ] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[18:57:32.021][Moby           ][Info   ] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[18:57:32.485][Moby           ][Info   ] Initializing Nozomi driver 2.1d
[18:57:32.942][Moby           ][Info   ] Non-volatile memory driver v1.3
[18:57:33.590][Moby           ][Info   ] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[18:57:33.688][Moby           ][Info   ] loop: module loaded
[18:57:34.069][Moby           ][Info   ] nbd: registered device at major 43
[18:57:34.731][Moby           ][Info   ] VMware PVSCSI driver - version 1.0.7.0-k
[18:57:35.140][Moby           ][Info   ] hv_vmbus: registering driver hv_storvsc
[18:57:35.269][Moby           ][Info   ] scsi host0: storvsc_host_t
[18:57:36.118][Moby           ][Info   ] scsi 0:0:0:0: Direct-Access     Msft     Virtual Disk     1.0  PQ: 0 ANSI: 5
[18:57:37.115][Moby           ][Info   ] scsi 0:0:0:1: CD-ROM            Msft     Virtual DVD-ROM  1.0  PQ: 0 ANSI: 0
[18:57:38.094][Moby           ][Info   ] sr 0:0:0:1: [sr0] scsi3-mmc drive: 0x/0x caddy
[18:57:38.871][Moby           ][Info   ] cdrom: Uniform CD-ROM driver Revision: 3.20
[18:57:39.507][Moby           ][Info   ] sd 0:0:0:0: [sda] 125829120 512-byte logical blocks: (64.4 GB/60.0 GiB)
[18:57:39.980][Moby           ][Info   ] sd 0:0:0:0: Attached scsi generic sg0 type 0
[18:57:40.301][Moby           ][Info   ] sr 0:0:0:1: Attached scsi generic sg1 type 5
[18:57:40.794][Moby           ][Info   ] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[18:57:41.360][Moby           ][Info   ] tun: Universal TUN/TAP device driver, 1.6
[18:57:42.181][Moby           ][Info   ] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[18:57:42.833][Moby           ][Info   ] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[18:57:43.551][Moby           ][Info   ] e1000: Copyright (c) 1999-2006 Intel Corporation.
[18:57:44.008][Moby           ][Info   ] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[18:57:44.621][Moby           ][Info   ] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[18:57:45.470][Moby           ][Info   ] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 3.2.2-k
[18:57:46.126][Moby           ][Info   ] ixgbevf: Copyright (c) 2009 - 2015 Intel Corporation.
[18:57:46.673][Moby           ][Info   ] PPP generic driver version 2.4.2
[18:57:47.112][Moby           ][Info   ] PPP BSD Compression module registered
[18:57:47.609][Moby           ][Info   ] PPP Deflate Compression module registered
[18:57:47.997][Moby           ][Info   ] PPP MPPE Compression module registered
[18:57:48.469][Moby           ][Info   ] NET: Registered protocol family 24
[18:57:48.814][Moby           ][Info   ] PPTP driver version 0.8.5
[18:57:49.470][Moby           ][Info   ] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[18:57:50.113][Moby           ][Info   ] hv_vmbus: registering driver hv_netvsc
[18:57:50.928][Moby           ][Info   ] hv_netvsc: hv_netvsc channel opened successfully
[18:57:52.206][Moby           ][Info   ] hv_netvsc b62a8208-5a46-4aed-a199-e95456d7608a: Send section size: 6144, Section count:2560
[18:57:53.611][Moby           ][Info   ] hv_netvsc b62a8208-5a46-4aed-a199-e95456d7608a: Device MAC 00:15:5d:01:73:07 link state up
[18:57:54.130][Moby           ][Info   ] Fusion MPT base driver 3.04.20
[18:57:54.714][Moby           ][Info   ] Copyright (c) 1999-2008 LSI Corporation
[18:57:55.316][Moby           ][Info   ] Fusion MPT SPI Host driver 3.04.20
[18:57:55.842][Moby           ][Info   ] aoe: AoE v85 initialised.
[18:57:56.911][Moby           ][Info   ] i8042: PNP: No PS/2 controller found. Probing ports directly.
[18:57:57.370][Moby           ][Info   ] i8042: No controller found
[18:57:58.146][Moby           ][Info   ] hv_vmbus: registering driver hyperv_keyboard
[18:57:58.884][Moby           ][Info   ] mousedev: PS/2 mouse device common for all mice
[18:57:59.825][Moby           ][Info   ] input: PC Speaker as /devices/platform/pcspkr/input/input0
[18:58:00.477][Moby           ][Info   ] rtc_cmos 00:00: RTC can wake from S4
[18:58:01.276][Moby           ][Info   ] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[18:58:01.998][Moby           ][Info   ] rtc_cmos 00:00: alarms up to one month, 114 bytes nvram
[18:58:02.389][Moby           ][Info   ] i2c /dev entries driver
[18:58:02.849][Moby           ][Info   ] EFI Variables Facility v0.08 2004-May-17
[18:58:03.182][Moby           ][Info   ] pstore: using zlib compression
[18:58:03.741][Moby           ][Info   ] pstore: Registered efi as persistent store backend
[18:58:04.229][Moby           ][Info   ] hv_utils: Registering HyperV Utility Driver
[18:58:04.698][Moby           ][Info   ] hv_vmbus: registering driver hv_util
[18:58:05.145][Moby           ][Info   ] hv_utils: Heartbeat IC version 3.0
[18:58:05.638][Moby           ][Info   ] hv_utils: Shutdown IC version 3.0
[18:58:06.157][Moby           ][Info   ] oprofile: using NMI interrupt.
[18:58:06.444][Moby           ][Info   ] hv_utils: TimeSync IC version 4.0
[18:58:06.599][Moby           ][Info   ] GACT probability on
[18:58:07.108][Moby           ][Info   ] Mirror/redirect action on
[18:58:07.344][Moby           ][Info   ] Simple TC action Loaded
[18:58:07.682][Moby           ][Info   ] netem: version 1.3
[18:58:07.938][Moby           ][Info   ] u32 classifier
[18:58:08.359][Moby           ][Info   ]     Performance counters on
[18:58:08.629][Moby           ][Info   ]     input device check on
[18:58:08.851][Moby           ][Info   ]     Actions configured
[18:58:09.298][Moby           ][Info   ] Netfilter messages via NETLINK v0.30.
[18:58:09.992][Moby           ][Info   ] nfnl_acct: registering with nfnetlink.
[18:58:10.855][Moby           ][Info   ] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[18:58:11.515][Moby           ][Info   ] ctnetlink v0.93: registering with nfnetlink.
[18:58:12.496][Moby           ][Info   ] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[18:58:13.519][Moby           ][Info   ] nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
[18:58:14.099][Moby           ][Info   ] xt_time: kernel timezone is -0000
[18:58:14.452][Moby           ][Info   ] ip_set: protocol 6
[18:58:15.259][Moby           ][Info   ] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[18:58:16.402][Moby           ][Info   ] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[18:58:17.101][Moby           ][Info   ] IPVS: Creating netns size=2104 id=0
[18:58:17.443][Moby           ][Info   ] IPVS: ipvs loaded.
[18:58:18.005][Moby           ][Info   ] IPVS: [rr] scheduler registered.
[18:58:18.512][Moby           ][Info   ] IPVS: [wrr] scheduler registered.
[18:58:19.079][Moby           ][Info   ] IPVS: [lc] scheduler registered.
[18:58:19.667][Moby           ][Info   ] IPVS: [wlc] scheduler registered.
[18:58:20.258][Moby           ][Info   ] IPVS: [fo] scheduler registered.
[18:58:20.889][Moby           ][Info   ] IPVS: [ovf] scheduler registered.
[18:58:21.415][Moby           ][Info   ] IPVS: [lblc] scheduler registered.
[18:58:22.027][Moby           ][Info   ] IPVS: [lblcr] scheduler registered.
[18:58:22.598][Moby           ][Info   ] IPVS: [dh] scheduler registered.
[18:58:23.210][Moby           ][Info   ] IPVS: [sh] scheduler registered.
[18:58:23.893][Moby           ][Info   ] IPVS: [sed] scheduler registered.
[18:58:24.357][Moby           ][Info   ] IPVS: [nq] scheduler registered.
[18:58:24.966][Moby           ][Info   ] IPVS: ftp: loaded support on port[0] = 21
[18:58:25.660][Moby           ][Info   ] ipip: IPv4 and MPLS over IPv4 tunneling driver
[18:58:26.374][Moby           ][Info   ] gre: GRE over IPv4 demultiplexor driver
[18:58:27.098][Moby           ][Info   ] ip_gre: GRE over IPv4 tunneling driver
[18:58:27.602][Moby           ][Info   ] IPv4 over IPsec tunneling driver
[18:58:28.287][Moby           ][Info   ] ip_tables: (C) 2000-2006 Netfilter Core Team
[18:58:29.197][Moby           ][Info   ] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[18:58:29.949][Moby           ][Info   ] arp_tables: arp_tables: (C) 2002 David S. Miller
[18:58:30.165][Moby           ][Info   ] Initializing XFRM netlink socket
[18:58:30.659][Moby           ][Info   ] NET: Registered protocol family 10
[18:58:30.937][Moby           ][Info   ] mip6: Mobile IPv6
[18:58:31.660][Moby           ][Info   ] ip6_tables: (C) 2000-2006 Netfilter Core Team
[18:58:32.349][Moby           ][Info   ] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[18:58:32.995][Moby           ][Info   ] ip6_gre: GRE over IPv6 tunneling driver
[18:58:33.405][Moby           ][Info   ] NET: Registered protocol family 17
[18:58:33.800][Moby           ][Info   ] NET: Registered protocol family 15
[18:58:34.270][Moby           ][Info   ] Bridge firewalling registered
[18:58:34.671][Moby           ][Info   ] Ebtables v2.0 registered
[18:58:35.262][Moby           ][Info   ] l2tp_core: L2TP core driver, V2.0
[18:58:35.844][Moby           ][Info   ] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[18:58:36.245][Moby           ][Info   ] 8021q: 802.1Q VLAN Support v1.8
[18:58:36.648][Moby           ][Info   ] 9pnet: Installing 9P2000 support
[18:58:37.197][Moby           ][Info   ] Key type dns_resolver registered
[18:58:37.937][Moby           ][Info   ] openvswitch: Open vSwitch switching datapath
[18:58:38.449][Moby           ][Info   ] hv_vmbus: registering driver hv_sock
[18:58:38.884][Moby           ][Info   ] NET: Registered protocol family 43
[18:58:39.359][Moby           ][Info   ] mpls_gso: MPLS GSO support
[18:58:39.970][Moby           ][Info   ] microcode: CPU0: patch_level=0xffffffff
[18:58:40.665][Moby           ][Info   ] microcode: CPU1: patch_level=0xffffffff
[18:58:42.060][Moby           ][Info   ] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[18:58:42.683][Moby           ][Info   ] registered taskstats version 1
[18:58:42.989][Moby           ][Info   ] Key type big_key registered
[18:58:43.533][Moby           ][Info   ] Key type encrypted registered
[18:58:44.798][Moby           ][Info   ] rtc_cmos 00:00: setting system clock to 2017-02-25 18:58:22 UTC (1488049102)
[18:58:45.640][Moby           ][Info   ] INFO: rcu_sched self-detected stall on CPU
[18:58:46.780][Moby           ][Info   ]    1-...: (105 ticks this GP) idle=e79/140000000000001/0 softirq=96/96 fqs=40 
[18:58:47.445][Moby           ][Info   ]     (t=6001 jiffies g=-266 c=-267 q=161)
[18:58:47.792][Moby           ][Info   ] Task dump for CPU 1:
[18:58:48.933][Moby           ][Info   ] kworker/u256:1  R  running task        0   143      2 0x00000008
[18:58:49.762][Moby           ][Info   ] Workqueue: events_unbound async_run_entry_fn
[18:58:50.912][Moby           ][Info   ]  0000000000000000 ffffffff81101fc2 ffffffff81e4f800 ffffffff81e4f600
[18:58:51.835][Moby           ][Info   ]  ffffffff8119bc14 000000010000002c ffffffff81e4f600 ffff880075e59640
[18:58:52.927][Moby           ][Info   ]  ffffc90000587998 ffffffff81124416 00000000000000a1 0000989680000000
[18:58:53.184][Moby           ][Info   ] Call Trace:
[18:58:53.336][Moby           ][Info   ]  <IRQ> 
[18:58:54.059][Moby           ][Info   ]  [<ffffffff81101fc2>] ? sched_show_task+0xc8/0xd5
[18:58:55.065][Moby           ][Info   ]  [<ffffffff8119bc14>] ? rcu_dump_cpu_stacks+0x89/0x9e
[18:58:56.015][Moby           ][Info   ]  [<ffffffff81124416>] ? rcu_check_callbacks+0x22f/0x5e8
[18:58:56.807][Moby           ][Info   ]  [<ffffffff81134c33>] ? tick_sched_do_timer+0x29/0x29
[18:58:57.573][Moby           ][Info   ]  [<ffffffff81128459>] ? update_process_times+0x28/0x4a
[18:58:58.517][Moby           ][Info   ]  [<ffffffff81134715>] ? tick_sched_handle+0x40/0x4c
[18:58:59.364][Moby           ][Info   ]  [<ffffffff81134c67>] ? tick_sched_timer+0x34/0x58
[18:59:00.317][Moby           ][Info   ]  [<ffffffff81128cbd>] ? __hrtimer_run_queues+0xd2/0x1bf
[18:59:01.219][Moby           ][Info   ]  [<ffffffff8112915c>] ? hrtimer_interrupt+0x6c/0x120
[18:59:01.897][Moby           ][Info   ]  [<ffffffff8161c1f6>] ? vmbus_isr+0x70/0xb0
[18:59:02.746][Moby           ][Info   ]  [<ffffffff8103516e>] ? hyperv_vector_handler+0x35/0x44
[18:59:03.523][Moby           ][Info   ]  [<ffffffff818418e2>] ? hyperv_callback_vector+0x82/0x90
[18:59:03.694][Moby           ][Info   ]  <EOI> 
[18:59:04.432][Moby           ][Info   ]  [<ffffffff81115f7e>] ? arch_local_irq_restore+0x2/0x8
[18:59:05.280][Moby           ][Info   ]  [<ffffffff811180c5>] ? console_unlock+0x48d/0x4af
[18:59:06.162][Moby           ][Info   ]  [<ffffffff8111842e>] ? vprintk_emit+0x347/0x358
[18:59:07.013][Moby           ][Info   ]  [<ffffffff814f8f64>] ? dev_vprintk_emit+0x1aa/0x1d4
[18:59:07.708][Moby           ][Info   ]  [<ffffffff810fff3c>] ? wake_up_q+0x40/0x40
[18:59:08.452][Moby           ][Info   ]  [<ffffffff811e1858>] ? ___cache_free+0xd1/0x126
[18:59:09.127][Moby           ][Info   ]  [<ffffffff814f8fd8>] ? dev_printk_emit+0x4a/0x66
[18:59:09.852][Moby           ][Info   ]  [<ffffffff814f90b5>] ? dev_printk+0x56/0x72
[18:59:10.712][Moby           ][Info   ]  [<ffffffff8152bf7b>] ? sdev_prefix_printk+0xf3/0x120
[18:59:11.519][Moby           ][Info   ]  [<ffffffff81535839>] ? sd_config_discard+0x127/0x131
[18:59:12.371][Moby           ][Info   ]  [<ffffffff815387ad>] ? sd_revalidate_disk+0x7ef/0x14c3
[18:59:13.210][Moby           ][Info   ]  [<ffffffff8110421a>] ? sched_clock_local+0xc/0x6b
[18:59:14.322][Moby           ][Info   ]  [<ffffffff81105274>] ? get_sd_balance_interval.isra.48+0x13/0x2e
[18:59:15.021][Moby           ][Info   ]  [<ffffffff81539545>] ? sd_probe_async+0xc4/0x191
[18:59:15.819][Moby           ][Info   ]  [<ffffffff810fa154>] ? async_run_entry_fn+0x34/0xba
[18:59:16.549][Moby           ][Info   ]  [<ffffffff810f2b46>] ? process_one_work+0x18a/0x284
[18:59:17.260][Moby           ][Info   ]  [<ffffffff810f3108>] ? worker_thread+0x1d8/0x2ab
[18:59:18.066][Moby           ][Info   ]  [<ffffffff810f2f30>] ? rescuer_thread+0x2c4/0x2c4
[18:59:18.646][Moby           ][Info   ]  [<ffffffff810f7395>] ? kthread+0xab/0xb3
[18:59:19.265][Moby           ][Info   ]  [<ffffffff810f72ea>] ? init_completion+0x1d/0x1d
[18:59:19.834][Moby           ][Info   ]  [<ffffffff81840995>] ? ret_from_fork+0x25/0x30
[18:59:20.205][Moby           ][Info   ] random: crng init done
[18:59:20.829][Moby           ][Info   ] sd 0:0:0:0: [sda] 4096-byte physical blocks
[18:59:21.472][Moby           ][Info   ] sd 0:0:0:0: [sda] Write Protect is off
[18:59:22.605][Moby           ][Info   ] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[18:59:22.826][Moby           ][Info   ]  sda: sda1
[18:59:23.469][Moby           ][Info   ] sd 0:0:0:0: [sda] Attached SCSI disk
[18:59:24.390][Moby           ][Info   ] Freeing unused kernel memory: 1380K (ffffffff81f61000 - ffffffff820ba000)
[18:59:25.229][Moby           ][Info   ] Write protecting the kernel read-only data: 14336k
[18:59:25.930][Moby           ][Info   ] Freeing unused kernel memory: 1760K (ffff880001848000 - ffff880001a00000)
[18:59:26.773][Moby           ][Info   ] Freeing unused kernel memory: 1248K (ffff880001cc8000 - ffff880001e00000)
[18:59:27.435][Moby           ][Info   ] 
[18:59:28.332][Moby           ][Info   ]    OpenRC 0.21.7.e3f10ac is starting up Linux 4.9.8-moby (x86_64)
[18:59:28.353][Moby           ][Info   ] 
[18:59:28.884][Moby           ][Info   ]  * Mounting /proc ... [ ok ]
[18:59:29.542][Moby           ][Info   ]  * Mounting /run ... * /run/openrc: creating directory
[18:59:29.905][Moby           ][Info   ]  * /run/lock: creating directory
[18:59:30.285][Moby           ][Info   ]  * /run/lock: correcting owner
[18:59:30.780][Moby           ][Info   ]  * Caching service dependencies ... [ ok ]
[18:59:31.001][Moby           ][Info   ]  * Mounting /sys ... [ ok ]
[18:59:31.463][Moby           ][Info   ]  * Mounting security filesystem ... [ ok ]
[18:59:31.756][Moby           ][Info   ]  * Mounting debug filesystem ... [ ok ]
[18:59:32.189][Moby           ][Info   ]  * Mounting fuse control filesystem ... [ ok ]
[18:59:32.857][Moby           ][Info   ]  * Mounting persistent storage (pstore) filesystem ... [ ok ]
[18:59:33.408][Moby           ][Info   ]  * Mounting cgroup filesystem ... [ ok ]
[18:59:34.097][Moby           ][Info   ]  * Mounting devtmpfs on /dev ... [ ok ]
[18:59:34.541][Moby           ][Info   ]  * Mounting /dev/mqueue ... [ ok ]
[18:59:34.833][Moby           ][Info   ]  * Mounting /dev/pts ... [ ok ]
[18:59:35.245][Moby           ][Info   ]  * Mounting /dev/shm ... [ ok ]
[18:59:35.676][Moby           ][Info   ]  * Starting busybox mdev ... [ ok ]
[18:59:36.191][Moby           ][Info   ]  * Configuring host block device .../dev/sda1: recovering journal
[18:59:37.070][Moby           ][Info   ] /dev/sda1: clean, 71/3932160 files, 587895/15728384 blocks
[18:59:37.713][Moby           ][Info   ]  [ ok ]
[18:59:37.884][Moby           ][Info   ]  * Autodetection of hardware disabled from boot cmdline
[18:59:38.542][Moby           ][Info   ]  * Remounting filesystems ... [ ok ]
[18:59:39.094][Moby           ][Info   ]  * Mounting local filesystems ... [ ok ]
[18:59:39.960][Moby           ][Info   ]  * Setting system clock using the hardware clock [UTC] ... [ ok ]
[18:59:40.392][Moby           ][Info   ]  * Setting hostname ... [ ok ]
[18:59:41.183][Moby           ][Info   ]  * Creating user login records ... [ ok ]
[18:59:41.690][Moby           ][Info   ]  * Starting vsock proxy ... [ ok ]
[18:59:42.086][Moby           ][Info   ]  * sysklogd -> start: syslogd ... [ ok ]
[18:59:43.122][Moby           ][Info   ]  * sysklogd -> start: klogd ... [ ok ]
[18:59:43.670][Moby           ][Info   ]  * Starting busybox crond ... [ ok ]
[18:59:44.345][Moby           ][Info   ]  * Mounting misc binary format filesystem ... [ ok ]
[18:59:44.840][Moby           ][Info   ]  * Setting sysfs variables ... [ ok ]
[18:59:45.155][Moby           ][Info   ]  * Starting local ... [ ok ]
[18:59:47.085][Moby           ][Info   ]  * Configuring Windows network settings from database .../sbin/9pmount-vsock: starting in listening mode with serviceid=C378280D-DA14-42C8-A24E-0DE92A1028E2, tag=db, path=/Database
[18:59:47.142][DataKit        ][Info   ] com.docker.db.exe: accepted a new connection on hyperv-connect://cde17a14-54bf-4e71-b5dc-0393d362ebd3
[18:59:47.386][DataKit        ][Info   ] com.docker.db.exe: Using protocol TwoThousand msize 4096
[18:59:48.333][Moby           ][Info   ] /sbin/9pmount-vsock: Connect from: 00000000-0000-0000-0000-000000000000:485c6b03-fbca-11e6-82ba-5cf3707dd7c3
[18:59:49.426][Moby           ][Info   ] /sbin/9pmount-vsock: mount successful for serviceid=C378280D-DA14-42C8-A24E-0DE92A1028E2 tag=db path=/Database
[18:59:50.211][Moby           ][Info   ]  [ ok ]
[18:59:50.680][Moby           ][Info   ]  * Configuring kernel parameters ... [ ok ]
[18:59:51.478][Moby           ][Info   ]  * Starting VPN proxy ... [ ok ]
[19:00:22.207][Moby           ][Info   ]  * Starting DHCP Client Daemon ... [ ok ]
[19:00:23.046][Moby           ][Info   ]  * Starting networking ... *   lo ... [ ok ]
[19:00:23.717][Moby           ][Info   ]  * Initializing random number generator ... [ ok ]
[19:02:21.647][ErrorReportWindow][Info   ] Open logs

schatzidogssss commented 7 years ago

Same issue

DaleCam commented 7 years ago

Same issue on Windows 10 Pro (not running as VM)

rishibamba commented 7 years ago

Same issue on Windows 10 Pro.

Docker hv-sock proxy (vsudd) is not reachable at Docker.Backend.ContainerEngine.Linux.ConnectToVsud(TaskCompletionSource`1 vmId) at Docker.Backend.ContainerEngine.Linux.DoStart(Settings settings) at Docker.Backend.ContainerEngine.Linux.Restart(Settings settings) at Docker.Core.Pipe.NamedPipeServer.<>c__DisplayClass8_0.b__0(Object[] parameters) at Docker.Core.Pipe.NamedPipeServer.RunAction(String action, Object[] parameters)

zleao commented 7 years ago

Same problem here. Running Parallels 12 with Windows 10 Pro

Docker hv-sock proxy (vsudd) is not reachable at Docker.Backend.ContainerEngine.Linux.ConnectToVsud(TaskCompletionSource`1 vmId) at Docker.Backend.ContainerEngine.Linux.DoStart(Settings settings) at Docker.Backend.ContainerEngine.Linux.Start(Settings settings) at Docker.Core.Pipe.NamedPipeServer.<>c__DisplayClass8_0.b__0(Object[] parameters) at Docker.Core.Pipe.NamedPipeServer.RunAction(String action, Object[] parameters)

clemus90 commented 7 years ago

Same problem here.

Docker hv-sock proxy (vsudd) is not reachable at Docker.Backend.ContainerEngine.Linux.ConnectToVsud(TaskCompletionSource`1 vmId) at Docker.Backend.ContainerEngine.Linux.DoStart(Settings settings) at Docker.Backend.ContainerEngine.Linux.Start(Settings settings) at Docker.Core.Pipe.NamedPipeServer.<>c__DisplayClass8_0.b__0(Object[] parameters) at Docker.Core.Pipe.NamedPipeServer.RunAction(String action, Object[] parameters)

NPrice99 commented 7 years ago

Same problem here. OS: Windows 10 Pro Edition: Professional Id: 1607 Build: 14393 BuildLabName: 14393.953.amd64fre.rs1_release_inmarket.170303-1614

[21:05:50.703][NamedPipeServer][Error ] Unable to execute Start: Docker hv-sock proxy (vsudd) is not reachable at Docker.Backend.ContainerEngine.Linux.ConnectToVsud(TaskCompletionSource`1 vmId) at Docker.Backend.ContainerEngine.Linux.DoStart(Settings settings) at Docker.Backend.ContainerEngine.Linux.Start(Settings settings) at Docker.Core.Pipe.NamedPipeServer.<>c__DisplayClass8_0.b__0(Object[] parameters) at Docker.Core.Pipe.NamedPipeServer.RunAction(String action, Object[] parameters)

rishibamba commented 7 years ago

Any workarounds , anyone ?

khuffsmp commented 7 years ago

Oh no not again, had this issue a couple months ago. Just popped up for me again this morning as I was getting ready to do some work. Had been getting an error when I tried to run docker-compose up the last few days:

ERROR: for app Cannot start service app: oci runtime error: container_linux.go:247: starting container process caused " chdir to cwd (\"/var/www/html/application\") set in config.json failed: no such file or directory" ERROR: Encountered errors while bringing up the project. (App being the container that holds my code)

But simply restarting docker fixed it for me. Got the same error this morning but a restart gives me a crash error now. But the crash reporter is locked up when trying to send the crash report.

Docker hv-sock proxy (vsudd) is not reachable at Docker.Backend.ContainerEngine.Linux.ConnectToVsud(TaskCompletionSource`1 vmId) at Docker.Backend.ContainerEngine.Linux.DoStart(Settings settings) at Docker.Backend.ContainerEngine.Linux.Restart(Settings settings) at Docker.Core.Pipe.NamedPipeServer.<>c__DisplayClass8_0.b__0(Object[] parameters) at Docker.Core.Pipe.NamedPipeServer.RunAction(String action, Object[] parameters)

Running Windows 10 Pro build 14393.969 as host.

Edit - A second restart of docker fixed it for me. Made no changes on host, didn't even reboot. Just opened the docker settings from the tray and clicked Restart Docker... again. Had me scared there for a minute.

Fleischloser commented 7 years ago

For me the only working solution was to complete uninstall docker and hyper-v (via widows-feature deactivate). restart windows, install docker and let docker install hyper-v.

after this cleanup docker works fine for me.

NPrice99 commented 7 years ago

Was this with the new version ?

From: Arne Schulz [mailto:notifications@github.com] Sent: 29 March 2017 15:05 To: docker/for-win for-win@noreply.github.com Cc: Nigel Price pricen@njpenterprises.com; Comment comment@noreply.github.com Subject: Re: [docker/for-win] Docker hv-sock proxy (vsudd) is not reachable (#271)

For me the only working solution was to complete uninstall docker and hyper-v (via widows-feature deactivate). restart windows, install docker and let docker install hyper-v.

after this cleanup docker works fine for me.

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/docker/for-win/issues/271#issuecomment-290100334, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AIF00GKLMNAJh0-vnT11fVEL3PhimrEEks5rqmUdgaJpZM4LAxPu.

kubowitsche commented 7 years ago

In my case the 'Images and volumes VHD location' was pointing to the wrong location(mine was pointing at something in C:\Users\Public\Documents\Hyper-V\Virtual hard disks but the image was in the top level of the hyper-v directory). After correcting this, docker started as expected

byronmejia commented 7 years ago

Why do people leave such large logs in these comment sections... -_- Anyways, my issue ended up being the docker network interfaces were deleted. Just rebuild and you're good to go.

Hosar commented 7 years ago

Same issue here, any solution so far?

firejq commented 7 years ago

Same issue with 17.06.2-ce-win27 (13194)

reyou commented 6 years ago

I am a visitor sent by Google here is well. I was getting same error, and while I was messing around, i just went into Hyper-V Manager, right click on VM and click connect. While it was doing that, I hit Restart Docker link on Docker Settings, and it started to work again.

I know this makes zero sense, but maybe would save the date if you are in rush.

giansalex commented 6 years ago

Same error on windows 10

Docker hv-sock proxy (vsudd) is not reachable en Docker.Backend.ContainerEngine.Linux.ConnectToVsud(TaskCompletionSource`1 vmId) en C:\gopath\src\github.com\docker\pinata\win\src\Docker.Backend\ContainerEngine\Linux.cs:línea 293 en Docker.Backend.ContainerEngine.Linux.DoStart(Settings settings, String daemonOptions) en C:\gopath\src\github.com\docker\pinata\win\src\Docker.Backend\ContainerEngine\Linux.cs:línea 260 en Docker.Backend.ContainerEngine.Linux.Start(Settings settings, String daemonOptions) en C:\gopath\src\github.com\docker\pinata\win\src\Docker.Backend\ContainerEngine\Linux.cs:línea 130 en Docker.Core.Pipe.NamedPipeServer.<>c__DisplayClass9_0.b__0(Object[] parameters) en C:\gopath\src\github.com\docker\pinata\win\src\Docker.Core\pipe\NamedPipeServer.cs:línea 47 en Docker.Core.Pipe.NamedPipeServer.RunAction(String action, Object[] parameters) en C:\gopath\src\github.com\docker\pinata\win\src\Docker.Core\pipe\NamedPipeServer.cs:línea 145

herman-rogers commented 6 years ago

So I was getting this error on parallels (Version 13.3.0 (43321)) with windows 10 dev (the free one that comes with parallels), and Docker (Version 17.12.0-ce-win47 ). I initially tried everything in this post (disabling hyper-v, uninstall, etc) and the only thing that worked for me, oddly, was to run docker 'as admin'. That's it - now its working for the first time.

giansalex commented 6 years ago

I ran docker as admin, but don't work.

docker-robott commented 4 years ago

Closed issues are locked after 30 days of inactivity. This helps our team focus on active issues.

If you have found a problem that seems similar to this, please open a new issue.

Send feedback to Docker Community Slack channels #docker-for-mac or #docker-for-windows. /lifecycle locked

docker / for-win