I tried using this tool to get continuity to work on my Mac. I also tried the beta version but it just said that it was corrupted. The compatibility chart said that it would work fine but it failed with this error:
--- Initiating system compatibility check ---
Verifying Mac model reference... OK
Verifying Mac board-id... OK
Verifying OS X version... Warning: This tool wasn't tested on OS X versions higher than 10.10. Detected OS version: 10.11
Are you sure you want to continue?
1) Yes
2) No
#? 1
Verifying Wi-Fi hardware... OK
Verifying Bluetooth version... /Users/Dylan/Downloads/Continuity-Activation-Tool-master/Continuity Activation Tool.app/Contents/Resources/contitool.sh: line 357: [: 6
6: integer expression expected
NOT OK. Your hardware doesn't support Bluetooth 4.0, necessary for Continuity Current LMP Version=6
6, expected 6. Aborting.
Press any key to go back to the main menu...
Diagnostic check:
--- Initiating system compatiblity check ---
--- Hardware/OS checks ---
Verifying Continuity status... OK. OS X reports Continuity as inactive
Verifying Mac model reference... OK. Known compatible Mac Model detected: MacBookAir4,2
Verifying Mac board-id... OK. Long board id detected: Mac-742912EFDBEE19B3
Verifying OS X version... Warning: This tool wasn't tested with OS X versions higher than 10.10. Detected OS version: 10.11
Verifying Wi-Fi hardware... OK. A Broadcom AirPort card is active, and uses the legacy Brcm4331 kext. This tool can fix this.
Verifying AWDL status... OK. No AWDL is active, but the hardware seems to be able to support it. This tool can try to fix this.
Verifying Bluetooth hardware... OK. The internal Bluetooth card is active
Verifying Bluetooth version... /Users/Dylan/Downloads/Continuity-Activation-Tool-master/Continuity Activation Tool.app/Contents/Resources/contitool.sh: line 357: [: 6
6: integer expression expected
NOT OK. Your hardware doesn't support Bluetooth 4.0, necessary for Continuity. Current LMP Version=6
6, expected 6.
Verifying Bluetooth features... WARNING. Unknown Bluetooth features have been detected (code:15
15). This tool can try to fix this.
Verifying Bluetooth firmware... OK. Bluetooth firmware version: v151 c5845
--- Modifications check ---
Verifying OS kext protection... OK. Kext developer mode is not active. This tool can fix this.
Verifying kexts readability... OK. Wi-Fi and Bluetooth kexts were found and could be read
Verifying Bluetooth blacklist status... OK. Warning: Blacklist not found in the Bluetooth drivers. An OS X update might have made this hack useless.
However, your Mac model shouldn't need to be removed from that blacklist.
Verifying Wi-Fi whitelist status... OK. Your board-id is not yet whitelisted. This tool can fix this.
Verifying old Wi-Fi kext presence... OK. Legacy Brcm4331 Wi-Fi driver is present. This tool can fix this.
Verifying legacy Wi-Fi card patch... OK. The legacy Wi-Fi patch is not present. This tool can fix this.
Verifying BT4 dongles compatibility... WARNING. Unpatchable drivers found. They are either already patched or don't support CAT.
Press any key to go back to the main menu...
and this is my Bluetooth hardware specifications
Apple Bluetooth Software Version: 4.4.0f4 16320
Hardware, Features, and Settings:
Name: MacBook Air
Address: **-**-**-**-**-**
Bluetooth Low Energy Supported: Yes
Handoff Supported: No
Instant Hot Spot Supported: No
Manufacturer: Broadcom
Transport: USB
Chipset: 20702A3
Firmware Version: v151 c5845
Bluetooth Power: On
Discoverable: On
Connectable: Yes
Auto Seek Pointing: On
Remote wake: On
Vendor ID: 0x05AC
Product ID: 0x821F
HCI Version: 0x6
HCI Revision: 0x16D5
LMP Version: 0x6
LMP Subversion: 0x2297
Device Type (Major): Computer
Device Type (Complete): Mac Portable
Composite Class Of Device: 0x38010C
Device Class (Major): 0x01
Device Class (Minor): 0x03
Service Class: 0x1C0
Auto Seek Keyboard: On
I tried using this tool to get continuity to work on my Mac. I also tried the beta version but it just said that it was corrupted. The compatibility chart said that it would work fine but it failed with this error:
Diagnostic check:
and this is my Bluetooth hardware specifications