Closed AndreiPopoviciu closed 8 years ago
Which dongle do you have? Could you post the content of System Information - Bluetooth?
So, here are the informations from system report bluetooth: Apple Bluetooth Software Version: 4.4.3f4 16616 Hardware, Features, and Settings: Name: Andrei’s MacBook Pro Address: 00-1A-7D-DA-71-0C Bluetooth Low Energy Supported: Yes Handoff Supported: No Instant Hot Spot Supported: No Manufacturer: Cambridge Silicon Radio Transport: USB Firmware Version: 8891 Bluetooth Power: On Discoverable: Off Connectable: Yes Auto Seek Pointing: On Remote wake: On Vendor ID: 0x0A12 Product ID: 0x0001 HCI Version: 0x6 HCI Revision: 0x22BB LMP Version: 0x6 LMP Subversion: 0x22BB Device Type (Major): Computer Device Type (Complete): Mac Portable Composite Class Of Device: 0x38010C Device Class (Major): 0x01 Device Class (Minor): 0x03 Service Class: 0x1C0 Auto Seek Keyboard: On
My dongle is: Trust. It’s code is: 18187-03
On 22 Feb 2016, at 22:59, sysfloat notifications@github.com wrote:
Which dongle do you have? Could you post the content of System Information - Bluetooth?
— Reply to this email directly or view it on GitHub https://github.com/dokterdok/Continuity-Activation-Tool/issues/273#issuecomment-187379830.
Your dongle is not supported. Only broadcom dongles are supported.. You should try to get a dongle with a broadcom 20702 chip if you want to get Continuity working.
I installed the app, my iphone 5s (latest update) IS connected via bluetooth on my MBP early 2011 (el capitan 10.11.2) and everything works good: hotspot, messages/face time and unlock app but in the general settings doesn't appear the option to check handoff.
I tried to reinstall the continuity and on the compatibility check everything is good, besides the first line: "OS X reports Continuity as inactive" --- Initiating system compatiblity check ---
--- Hardware/OS checks --- Verifying Continuity status... OK. OS X reports Continuity as inactive Verifying Mac model reference... OK. Known compatible Mac Model detected: MacBookPro8,1 Verifying Mac board-id... OK. Long board id detected: Mac-94245B3640C91C81 Verifying OS X version... Warning: This version of Mac OS X (10.11.2) is Experimental! Only partially tested on El Capitan Verifying Wi-Fi hardware... OK. A Broadcom AirPort card is active, and is using the Continuity compatible Brcm4360 kext Verifying AWDL status... OK. An AWDL interface is up, Wi-Fi is ready for Continuity Verifying Bluetooth hardware... OK. 3rd party Bluetooth hardware detected Verifying Bluetooth version... OK. Bluetooth 4.0 detected Verifying Bluetooth features... WARNING. Unknown Bluetooth features have been detected (code:6). This tool can try to fix this. Verifying Bluetooth firmware... OK. Bluetooth firmware version: v187 c8891 Verifying Login Item... OK. Login item for Auto Continuity Check is not set.
--- Modifications check --- Verifying OS kext protection... OK. Kext developer mode is already active Verifying SIP... Ok. System Integrity Protection is already disabled Verifying ContinuitySupport... OK. This tool can fix this. Verifying kexts readability... OK. Wi-Fi and Bluetooth kexts were found and could be read Verifying Wi-Fi whitelist status... OK. The whitelist is correctly patched with your board-id Verifying old Wi-Fi kext presence... OK. Legacy Wi-Fi driver Brcm4331 was already removed Verifying legacy Wi-Fi card patch... OK. The patch is already done. Old Broadcom Wi-Fi cards may work.