Used dongle/card: Wifi PCIE TP-Link T6E and Bluetooth dongle asus BT400
Your Issue: I bought these cards assuming that Continuity will work plug and play. I tried many solutions with no results. My Bluetooth dongle is shown as BLE supported however Handoff/Instant Hotspot No. Wifi is Airdrop supported however it doesn't function.
--- Hardware/OS checks ---
Verifying Continuity status... OK. OS X reports Continuity as inactive
Verifying Mac model reference... WARNING. The compatibility of this Mac Model (iMac18,1) with this mod is unknown and may have unpredictable results
Verifying Mac board-id... OK. Long board id detected: Mac-4B682C642B45593E
Verifying OS X version... Warning: This tool wasn't tested with OS X versions higher than 10.10. Detected OS version: 10.13.3
Verifying Wi-Fi hardware... NOT OK. No compatible Broadcom AirPort card is active, Continuity won't work. Active kexts: .
Verifying AWDL status... NOT OK. Your Wi-Fi card doesn't support AWDL, and therefore doesn't work with Continuity.
Verifying Bluetooth hardware... WARNING. No Bluetooth controller references were found in the PRAM, dongles can't be detected.
Verifying Bluetooth version... OK. Bluetooth 4.0 detected
Verifying Bluetooth features... OK. Bluetooth features are currently not compatible with Continuity. This tool can try to fix this.
Verifying Bluetooth firmware... OK. Bluetooth firmware version: v14 c5563
Verifying Login Item... OK. Login item for Auto Continuity Check is not set.
--- Modifications check ---
Verifying OS kext protection... OK. Kext developer mode is not active. This tool can fix this.
Verifying SIP... Ok. System Integrity Protection is already disabled
Verifying ContinuitySupport... OK. Unknown Mac Model. This tool will try to fix this
Verifying kexts readability... OK. Wi-Fi and Bluetooth kexts were found and could be read
OK. Not run in sandbox
Verifying Wi-Fi whitelist status... OK. Your board-id is not yet whitelisted. This tool can fix this.
Checking legacy kext... OK. Not using legacy kext.
Verifying BT4 dongles compatibility... OK. Compatibility with BT4 USB dongles is not enabled, this tool can fix this if a dongle is plugged in
Verifying old Wi-Fi kext presence... OK. Legacy Brcm4331 Wi-Fi driver is present. This tool can fix this.
Verifying legacy Wi-Fi card patch... OK. The legacy Wi-Fi patch is not present. This tool can fix this.
Steps done to try to fix the issue:
I'm using CAT 2.6b6 and always give me that 10.13.3 is not supported?
Have you tried these steps? Yes
Is there already an open topic for this issue?
Please include the following information.
Your Issue: I bought these cards assuming that Continuity will work plug and play. I tried many solutions with no results. My Bluetooth dongle is shown as BLE supported however Handoff/Instant Hotspot No. Wifi is Airdrop supported however it doesn't function.
--- Hardware/OS checks --- Verifying Continuity status... OK. OS X reports Continuity as inactive Verifying Mac model reference... WARNING. The compatibility of this Mac Model (iMac18,1) with this mod is unknown and may have unpredictable results Verifying Mac board-id... OK. Long board id detected: Mac-4B682C642B45593E Verifying OS X version... Warning: This tool wasn't tested with OS X versions higher than 10.10. Detected OS version: 10.13.3 Verifying Wi-Fi hardware... NOT OK. No compatible Broadcom AirPort card is active, Continuity won't work. Active kexts: . Verifying AWDL status... NOT OK. Your Wi-Fi card doesn't support AWDL, and therefore doesn't work with Continuity. Verifying Bluetooth hardware... WARNING. No Bluetooth controller references were found in the PRAM, dongles can't be detected. Verifying Bluetooth version... OK. Bluetooth 4.0 detected Verifying Bluetooth features... OK. Bluetooth features are currently not compatible with Continuity. This tool can try to fix this. Verifying Bluetooth firmware... OK. Bluetooth firmware version: v14 c5563 Verifying Login Item... OK. Login item for Auto Continuity Check is not set.
--- Modifications check --- Verifying OS kext protection... OK. Kext developer mode is not active. This tool can fix this. Verifying SIP... Ok. System Integrity Protection is already disabled Verifying ContinuitySupport... OK. Unknown Mac Model. This tool will try to fix this Verifying kexts readability... OK. Wi-Fi and Bluetooth kexts were found and could be read OK. Not run in sandbox Verifying Wi-Fi whitelist status... OK. Your board-id is not yet whitelisted. This tool can fix this. Checking legacy kext... OK. Not using legacy kext. Verifying BT4 dongles compatibility... OK. Compatibility with BT4 USB dongles is not enabled, this tool can fix this if a dongle is plugged in Verifying old Wi-Fi kext presence... OK. Legacy Brcm4331 Wi-Fi driver is present. This tool can fix this. Verifying legacy Wi-Fi card patch... OK. The legacy Wi-Fi patch is not present. This tool can fix this.
Steps done to try to fix the issue: I'm using CAT 2.6b6 and always give me that 10.13.3 is not supported?