Is there already an open topic for this issue? Am not sure the CAT tools is working properly got a BT4.0 compliant blueetooth dongle + dongles
Please include the following information.
OS Version: 10.14.6
Mac model: MACBOOK PRO mid 2010
Dongle or replaced card?:
Used dongle/card:
macbook settings:
Model Name: MacBook Pro
Model Identifier: MacBookPro6,2
Processor Name: Intel Core i7
Processor Speed: 2.66 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Hyper-Threading Technology: Enabled
Memory: 8 GB
Boot ROM Version: MBP61.005D.B00
SMC Version (system): 1.58f17
Serial Number (system): W80294DFAGZ
Hardware UUID: 2283D331-555A-5DFA-9215-439E7523F757
Sudden Motion Sensor:
State: Enabled
Your Issue:
--- OS X Continuity Activation Tool 2.3 ---
by sysfloat
original by dokterdok
--- Initiating system compatiblity check ---
--- Hardware/OS checks ---
Verifying Continuity status... OK. OS X reports Continuity as active
Verifying Mac model reference... OK. Known compatible Mac Model detected: MacBookPro6,2
Verifying Mac board-id... OK. Short board id detected: Mac-F22586C8
Verifying OS X version... Warning: This tool wasn't tested with OS X versions higher than 10.10. Detected OS version: 10.14.6
Verifying Wi-Fi hardware... OK. A Broadcom AirPort card is active, and is using the Continuity compatible Brcm4360 kext
Verifying AWDL status... OK. An AWDL interface is up, Wi-Fi is ready for Continuity
Verifying Bluetooth hardware... OK. 3rd party Bluetooth hardware detected
Verifying Bluetooth version... OK. Bluetooth 4.0 detected
Verifying Bluetooth features... WARNING. Unknown Bluetooth features have been detected (code:6). This tool can try to fix this.
Verifying Bluetooth firmware... OK. Bluetooth firmware version: v187 c8891
Verifying Login Item... OK. Login item for Auto Continuity Check is set.
--- Modifications check ---
Verifying OS kext protection... OK. Kext developer mode is already active
Verifying kexts readability... OK. Wi-Fi and Bluetooth kexts were found and could be read
Verifying Wi-Fi whitelist status... OK. The whitelist is correctly patched with your board-id
Verifying BT4 dongles compatibility... OK. Compatibility with BT4 USB dongles is not enabled, this tool can fix this if a dongle is plugged in
Verifying old Wi-Fi kext presence... OK. Legacy Wi-Fi driver Brcm4331 was already removed
Verifying legacy Wi-Fi card patch... OK. The patch is already done. Old Broadcom Wi-Fi cards may work.
--- Hardware/OS checks ---
--- Modifications check ---
Press any key to go back to the main menu...
Steps done to try to fix the issue : i tried to force but still nothing great
why can't i activate or fix the plugged in dongle. : Verifying BT4 dongles compatibility... OK. Compatibility with BT4 USB dongles is not enabled, this tool can fix this if a dongle is plugged in
my system shows it is working and recognises the dongle else it would not actually work at least partially.
Apple Bluetooth Software Version: 6.0.14d3
Hardware, Features, and Settings:
Address: 00-1A-7D-DA-71-03
Bluetooth Low Energy Supported: Yes
Handoff Supported: Yes
Instant Hot Spot Supported: Yes
Manufacturer: Cambridge Silicon Radio
Transport: USB
Firmware Version: 8891
Bluetooth Power: Off
Auto Seek Pointing: On
Remote wake: On
Vendor ID: 0x0A12
Product ID: 0x0001
HCI Version: 4.0 (0x6)
HCI Revision: 0x22BB
LMP Version: 4.0 (0x6)
LMP Subversion: 0x22BB
Auto Seek Keyboard: On
Devices (Paired, Configured, etc.):
00-cd-fe-6b-2b-7e:
Address: 00-CD-FE-6B-2B-7E
Major Type: Miscellaneous
Minor Type: Unknown
Services:
Paired: Yes
Configured: Yes
Connected: No
Firmware Version: 0x0000
Class of Device: 0x00 0x00 0x0000
Kris Seeburn’s iPhone:
Address: C0-E8-62-84-A5-5F
Major Type: Phone
Minor Type: Smartphone
Services: Wireless iAP, PAN Network Access Profile, Handsfree Gateway, Audio Source, AVRCP Device, MAP MAS-iOS, Wireless iAP v2, AVRCP Device, Phonebook
Paired: Yes
Configured: Yes
Connected: No
Manufacturer: Broadcom (0x9, 0x420E)
Firmware Version: 0x0C40
Vendor ID: 0x004C
Product ID: 0x7238
Class of Device: 0x02 0x03 0x7A020C
EDR Supported: Yes
eSCO Supported: Yes
SSP Supported: Yes
Services:
Bluetooth File Transfer:
Folder other devices can browse: ~/Public
When receiving items: Accept all without warning
State: Disabled
Bluetooth File Exchange:
Folder for accepted items: ~/Downloads
When other items are accepted: Save to location
When receiving items: Accept all without warning
State: Disabled
Bluetooth Internet Sharing:
State: Disabled
Incoming Serial Ports:
Bluetooth-Incoming-Port:
RFCOMM Channel: 3
Requires Authentication: No
Outgoing Serial Ports:
KrisSeeburnsiPhone-Wire:
Address: C0-E8-62-84-A5-5F
RFCOMM Channel: 1
Requires Authentication: No
i also want to enable the file drop exchange which says State: Disabled
Is there also a way to change the model identifier from 6,2 to 7,1 or 7,2
Also how do i solve this issue:
WARNING. Unknown Bluetooth features have been detected (code:6). This tool can try to fix this.
Have you tried these steps?
Is there already an open topic for this issue? Am not sure the CAT tools is working properly got a BT4.0 compliant blueetooth dongle + dongles
Please include the following information.
macbook settings: Model Name: MacBook Pro Model Identifier: MacBookPro6,2 Processor Name: Intel Core i7 Processor Speed: 2.66 GHz Number of Processors: 1 Total Number of Cores: 2 L2 Cache (per Core): 256 KB L3 Cache: 4 MB Hyper-Threading Technology: Enabled Memory: 8 GB Boot ROM Version: MBP61.005D.B00 SMC Version (system): 1.58f17 Serial Number (system): W80294DFAGZ Hardware UUID: 2283D331-555A-5DFA-9215-439E7523F757 Sudden Motion Sensor: State: Enabled
Your Issue:
--- OS X Continuity Activation Tool 2.3 --- by sysfloat
original by dokterdok
--- Initiating system compatiblity check ---
--- Hardware/OS checks --- Verifying Continuity status... OK. OS X reports Continuity as active Verifying Mac model reference... OK. Known compatible Mac Model detected: MacBookPro6,2 Verifying Mac board-id... OK. Short board id detected: Mac-F22586C8 Verifying OS X version... Warning: This tool wasn't tested with OS X versions higher than 10.10. Detected OS version: 10.14.6 Verifying Wi-Fi hardware... OK. A Broadcom AirPort card is active, and is using the Continuity compatible Brcm4360 kext Verifying AWDL status... OK. An AWDL interface is up, Wi-Fi is ready for Continuity Verifying Bluetooth hardware... OK. 3rd party Bluetooth hardware detected Verifying Bluetooth version... OK. Bluetooth 4.0 detected Verifying Bluetooth features... WARNING. Unknown Bluetooth features have been detected (code:6). This tool can try to fix this. Verifying Bluetooth firmware... OK. Bluetooth firmware version: v187 c8891 Verifying Login Item... OK. Login item for Auto Continuity Check is set.
--- Modifications check --- Verifying OS kext protection... OK. Kext developer mode is already active Verifying kexts readability... OK. Wi-Fi and Bluetooth kexts were found and could be read Verifying Wi-Fi whitelist status... OK. The whitelist is correctly patched with your board-id Verifying BT4 dongles compatibility... OK. Compatibility with BT4 USB dongles is not enabled, this tool can fix this if a dongle is plugged in Verifying old Wi-Fi kext presence... OK. Legacy Wi-Fi driver Brcm4331 was already removed Verifying legacy Wi-Fi card patch... OK. The patch is already done. Old Broadcom Wi-Fi cards may work. --- Hardware/OS checks ---
--- Modifications check ---
Press any key to go back to the main menu... Steps done to try to fix the issue : i tried to force but still nothing great
why can't i activate or fix the plugged in dongle. : Verifying BT4 dongles compatibility... OK. Compatibility with BT4 USB dongles is not enabled, this tool can fix this if a dongle is plugged in
my system shows it is working and recognises the dongle else it would not actually work at least partially.
Apple Bluetooth Software Version: 6.0.14d3 Hardware, Features, and Settings: Address: 00-1A-7D-DA-71-03 Bluetooth Low Energy Supported: Yes Handoff Supported: Yes Instant Hot Spot Supported: Yes Manufacturer: Cambridge Silicon Radio Transport: USB Firmware Version: 8891 Bluetooth Power: Off Auto Seek Pointing: On Remote wake: On Vendor ID: 0x0A12 Product ID: 0x0001 HCI Version: 4.0 (0x6) HCI Revision: 0x22BB LMP Version: 4.0 (0x6) LMP Subversion: 0x22BB Auto Seek Keyboard: On Devices (Paired, Configured, etc.): 00-cd-fe-6b-2b-7e: Address: 00-CD-FE-6B-2B-7E Major Type: Miscellaneous Minor Type: Unknown Services: Paired: Yes Configured: Yes Connected: No Firmware Version: 0x0000 Class of Device: 0x00 0x00 0x0000 Kris Seeburn’s iPhone: Address: C0-E8-62-84-A5-5F Major Type: Phone Minor Type: Smartphone Services: Wireless iAP, PAN Network Access Profile, Handsfree Gateway, Audio Source, AVRCP Device, MAP MAS-iOS, Wireless iAP v2, AVRCP Device, Phonebook Paired: Yes Configured: Yes Connected: No Manufacturer: Broadcom (0x9, 0x420E) Firmware Version: 0x0C40 Vendor ID: 0x004C Product ID: 0x7238 Class of Device: 0x02 0x03 0x7A020C EDR Supported: Yes eSCO Supported: Yes SSP Supported: Yes Services: Bluetooth File Transfer: Folder other devices can browse: ~/Public When receiving items: Accept all without warning State: Disabled Bluetooth File Exchange: Folder for accepted items: ~/Downloads When other items are accepted: Save to location When receiving items: Accept all without warning State: Disabled Bluetooth Internet Sharing: State: Disabled Incoming Serial Ports: Bluetooth-Incoming-Port: RFCOMM Channel: 3 Requires Authentication: No Outgoing Serial Ports: KrisSeeburnsiPhone-Wire: Address: C0-E8-62-84-A5-5F RFCOMM Channel: 1 Requires Authentication: No
i also want to enable the file drop exchange which says State: Disabled
Is there also a way to change the model identifier from 6,2 to 7,1 or 7,2
Also how do i solve this issue: WARNING. Unknown Bluetooth features have been detected (code:6). This tool can try to fix this.