Closed qwerty8224 closed 8 years ago
It is advisable to test on many machines because it helped me.
The travel_speed in M3D Fio's Cura profiles is the same as the moveSpeed used in the Cura Engine parameters generated by M3D's official software. M3D knows their hardware better than anyone, which is why all of M3D Fio's Cura profiles are just converted versions of the Cura Engine parameters generated by M3D's official software.
Each printer is going to have different limitations based on the wear on the motors and the environment that the printer is in. So some people's printers can handle a travel_speed of 20mm/s. You can adjust your printer's X and Y speed limits if your printer isn't capable of handling the 20mm/s travel_speed. 20mm/s is 1200mm/min and 15mm/s is 900mm/min.
Thank you) will look for their own personal settings. Still thank you for amazing job))) My printer has received a second life))) is much better than the first)))
I spent a lot of tests and experiments showed that the Travell_speed is the culprit .... shear axis. Please correct profiles travel_speed 20 ->15 The speed will not lose a lot)))) but get quality prints