doppelgrau esp32-f9p-io-board issues

doppelgrau / esp32-f9p-io-board

An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V power, three 15V tolerant analog inputs, three 5V tolerant inputs.

Other

36 stars 9 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Isolate USB from the rest

#47 doppelgrau opened 4 years ago
0
Check optional parts

#46 doppelgrau opened 4 years ago
1
Fuse for the motors lower and replaceable

#45 doppelgrau opened 4 years ago
0
Reduce M1 to one VNH707AS

#44 doppelgrau opened 4 years ago
0
divide power supply

#43 doppelgrau closed 4 years ago
1
Check if power supply can be made more robust

#42 doppelgrau opened 4 years ago
0
stable reference voltage for sensor and analog part of ads1115

#41 doppelgrau opened 4 years ago
1
Some visual aid to help with IMU orientation

#40 doppelgrau opened 5 years ago
0
More flash

#39 doppelgrau opened 5 years ago
0
Check IO protection

#38 doppelgrau opened 5 years ago
1
Closer look at CAN-interface

#37 doppelgrau opened 5 years ago
0
Case: Basic-1xF9P - Slightly rounded outer corners

#36 doppelgrau closed 5 years ago
1
Easier to test

#35 doppelgrau opened 5 years ago
0
Case: Basic-1xF9P - Thinner top side

#34 doppelgrau closed 5 years ago
1
AG_NTRIP_ESP.ino for ESP-F9P-IO-BOARD

#33 mnltake closed 5 years ago
2
Basic-1xF9P: holder during installation

#32 doppelgrau closed 5 years ago
1
Basic-1xF9P: Space for cable management / switch position

#31 doppelgrau closed 5 years ago
1
Basic-1xF9P: Screws

#30 doppelgrau closed 5 years ago
0
PIN for programming mode

#29 mnltake closed 5 years ago
0
Rotate PCB Labels

#28 flywire closed 5 years ago
5
Version 2.2

#27 doppelgrau closed 5 years ago
0
Better part names/values

#26 doppelgrau opened 5 years ago
0
Update BOM, Gerber, ...

#25 doppelgrau closed 5 years ago
1
Reduce BOM

#24 doppelgrau closed 5 years ago
1
Change xbee-Uart Pins

#23 doppelgrau closed 5 years ago
1
Check if current monitoring is reasonable

#22 doppelgrau opened 5 years ago
0
Evaluate if a three Port switch is an option

#21 doppelgrau closed 5 years ago
1
Evaluate the connectors

#20 doppelgrau opened 5 years ago
2
Check solder paste stencil

#19 doppelgrau closed 5 years ago
0
Disable power-save mode for RS232

#18 doppelgrau closed 5 years ago
0
make pickplacePDF, order CSV for 'www.seeedstudio.com'PCB & PCB Assembly

#17 mnltake closed 5 years ago
3
C35 Capacitance Value

#16 mnltake closed 5 years ago
1
Can I do everything with one ESP32?

#15 mnltake closed 5 years ago
1
free GND and Power under IMU

#14 doppelgrau closed 5 years ago
1
add an other uart for simpleRTK2Blite

#13 doppelgrau closed 5 years ago
2
Better software examples

#12 doppelgrau closed 5 years ago
1
Update Part List

#11 doppelgrau closed 5 years ago
0
Improve Readme

#10 doppelgrau closed 5 years ago
0
Update Gerber-Files

#9 doppelgrau closed 5 years ago
1
SMT-Pads/Holes in stencil

#8 doppelgrau closed 5 years ago
0
Move "Config" Button

#7 doppelgrau closed 5 years ago
0
physical location of the LSM9DS1

#6 doppelgrau closed 5 years ago
0
Check if the xbee-uart is free

#5 doppelgrau closed 5 years ago
1
Add some fiducials (>= 3)

#4 doppelgrau closed 5 years ago
2
Use "Thermal Relief"-Pads for better soldering on pads with low current

#3 doppelgrau closed 5 years ago
1
Fix connection to LAN8720A MDIO

#2 doppelgrau closed 5 years ago
0
Physical: Mounting hole for the F9P

#1 doppelgrau closed 5 years ago
0