search

doug-m / CollectorAuroraTesting

Manage testing feedback for Collector holistic testing.
0 stars 7 forks source link

Switching iPad Receiver and Provider Settings #118

Closed ratliffk closed 5 years ago

ratliffk commented 6 years ago

Issue

Currently in the Aurora beta, I've connected the EOS Arrow device to an iPad. When not connected and working in Aurora, I change back to the Integrated Receiver. Upon reconnect to the Arrow, I have I'm able to change the provider, but it drops the Profile each time. Meaning I have to look up three pieces of information to assure function.

Expected Behavior

When selecting a previous used Provider setting (in this case EOS Arrow versus the Integrated Receiver), the previously used "EOS" Profile settings should be available for selection.

Currently, the profile has to be recreated each time.

Map and Credentials

Steps to Reproduce

Open Collector. Check the Provider setting to confirm Integrated Receiver. Close window. Check Profile to confirm Default is selected. Connect EOS Arrow Gold receiver. Change the Provider to EOS Positioning. Close window. Open Profile, create the required coordinate system, datum and projection settings. Use Collector. Disconnect EOS from Collector. Change back the Provider to Integrated Receiver, Profile to Default. Use Collector. Close map, open settings, follow steps above to connect and setup EOS. Finding the Provider is still listed, but the Profile has to be reset each time.

Device Information

Kevin-GIS commented 6 years ago

@ratliffk with regards to the repro steps listed above, when you say 'Disconnect EOS from Collector', how are you disconnecting it? Just turning the receiver off, removing from the Bluetooth connections via the device settings, etc.

ratliffk commented 6 years ago

@Kevin-GIS - typically by powering the EOS device off. Bluetooth may or may not be turned off in the iPad settings.

ratliffk commented 6 years ago

Kenny Ratliff GIS Manager [OCWD_colorsmall] 2160 Spencer Court La Grange, Kentucky 40031 Office – 502.222.1690 Cell – 502.443.5621

From: Kevin Burke notifications@github.com Sent: Friday, June 22, 2018 12:13 PM To: doug-m/CollectorAuroraTesting CollectorAuroraTesting@noreply.github.com Cc: Kenny Ratliff kratliff@oldhamcountywater.com; Mention mention@noreply.github.com Subject: Re: [doug-m/CollectorAuroraTesting] Switching iPad Receiver and Provider Settings (#118)

@ratliffkhttps://github.com/ratliffk with regards to the repro steps listed above, when you say 'Disconnect EOS from Collector', how are you disconnecting it? Just turning the receiver off, removing from the Bluetooth connections via the device settings, etc.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/doug-m/CollectorAuroraTesting/issues/118#issuecomment-399496522, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AmgB0qANwp6Gzx2WaudZzu2-RU7Vh7pcks5t_ReggaJpZM4Usb9D.

Kevin-GIS commented 6 years ago

Thanks for information @ratliffk. I am having difficulty reproducing this behavior.

Would it be possible for you to share a screen recording of your steps? This will help me to ensure I am following the same procedure correctly.

ratliffk commented 6 years ago

@Kevin-GIS sorry for the delay in responding. Yes, I will try to capture the steps in a recording. Hopefully by the end of the week. Thanks for your patience!

Kevin-GIS commented 5 years ago

Unable to reproduce in the current Beta version. Closing this issue.