Closed hongsehunli closed 7 years ago
修改过了的
显示空白的 不知怎么回事
1.打开cmd窗口 2.把dns.exe 文件拖放cmd窗口,回车。
DNS服务器要设置为127.0.0.1(如果配置文件里写的是127.0.0.1
好像还是不行
...
改完配置文件后直接打开(双击)dns.exe
(此时不会有任何信息显示),然后在本地连接(or无线网络连接)->属性->IPV4中选择使用下面的DNS服务器地址,填写127.0.0.1,保存。
请确保 config.json ,rpz.json,dns.exe 这三个文件在同一个文件夹,默认就是这样。
2017年1月7日 下午7:57,"LIZONGZE" notifications@github.com写道:
... 改完配置文件后直接打开(双击)dns.exe(此时不会有任何信息显示),然后在本地连接(or无线网络连接)->属性->IPV4中选择 使用下面的DNS服务器地址,填写127.0.0.1,保存。
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/dowsnature/dowsDNS/issues/10#issuecomment-271079445, or mute the thread https://github.com/notifications/unsubscribe-auth/AXsT0ETC01eFS2ALyx5DDvcRO8PROf5Qks5rP32ngaJpZM4LdYi8 .
如果非要命令行执行必须先CD到目录。 config.json文件必须在执行启动命令的目录,而不一定是与dns.exe同级
确认配置文件按照README修改过了?