search

doyke / sipvicious

Automatically exported from code.google.com/p/sipvicious
0 stars 0 forks source link

TCP Support and UDP problem #1

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
What steps will reproduce the problem?
1. Connect a phone (Thomson ST2030)
2. User svmap to detect it
3. It doesn't work

What is the expected output? What do you see instead?
I expect to see the IP address of the phone, but ....

What version of the product are you using? On what operating system?
The latest at the moment of the SVN.

Please provide any additional information below.
root@aud-012:~# unicornscan -mT -p5060-5061 172.1X.1.159
TCP open                     sip[ 5060]         from 172.1X.1.159  ttl 64 
root@aud-012:~# unicornscan -mU -p5060-5061 172.18.1.0/24

So I think, svmap needs TCP and UDP support.

Original issue reported on code.google.com by pablo.ca...@gmail.com on 2 Apr 2008 at 9:10

GoogleCodeExporter commented 9 years ago 
pcatalina@aud-012:~$ sudo nmap -sU -sT -n -A -p5060-5061 172.1X.1.159

Starting Nmap 4.50 ( http://insecure.org ) at 2008-04-02 11:08 CEST
Warning: Traceroute does not support idle or connect scan, disabling...

Stats: 0:01:57 elapsed; 0 hosts completed (1 up), 1 undergoing Service Scan
Service scan Timing: About 50.00% done; ETC: 11:12 (0:01:56 remaining)
Interesting ports on 172.1X.1.159:
PORT     STATE         SERVICE VERSION
5060/tcp open          sip?
5061/tcp closed        unknown
5060/udp open|filtered sip
5061/udp closed        unknown
MAC Address: 00:14:7F:00:B5:52 (Thomson Telecom Belgium)
Device type: switch
Running: HP embedded
OS details: HP ProCurve switch (2500-, 2600-, 2800-, or 5300xl-series)
Uptime: 0.013 days (since Wed Apr  2 10:52:25 2008)
Network Distance: 1 hop

OS and Service detection performed. Please report any incorrect results at
http://insecure.org/nmap/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 124.096 seconds

Original comment by pablo.ca...@gmail.com on 2 Apr 2008 at 9:14

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
SIPVicious does not support TCP - this is a known limitation. However I would 
like to
look into why your HP device is not being detected by svmap through UDP. 
SIPVicious
makes use of UDP

Original comment by sandrogauc on 11 Jun 2008 at 11:11

GoogleCodeExporter commented 9 years ago 
Same problem here. I have the last svn version. Linux 3.0.0-15-generic 
#26-Ubuntu and python 2.7.2.

Original comment by metalani...@gmail.com on 29 Jan 2012 at 11:45

GoogleCodeExporter commented 9 years ago 
Is there an internal version for TCP support that I can use on Ubuntu?

Original comment by maus...@gmail.com on 22 May 2012 at 8:54