search

dpiquet / pve-monitor

pve-monitor is a tool to monitor hypervisor and virtual machines in a proxmox cluster
37 stars 24 forks source link

Hi, #7

Closed akther007 closed 10 years ago

akther007 commented 10 years ago

I have got an issue. When I run the following command: root@ubuntu:~# perl pve-monitor.pl --nodes --conf /etc/nagios3/pve-monitor.conf It shows that: root@ubuntu:~# Could not connect to any server ! My pve-monitor.conf file is: node node1a { address 192.168.102.1 port 8006 # Optional, default is 8006 monitor_account root monitor_password super@dm!n mem 80 90 # optional, not monitored if not defined cpu 80 95 # optional disk 80 90 # optional }

Please help me to find out the problem.

dpiquet commented 10 years ago

Hi,

It seems you have a networking problem. Can you ping 192.168.102.1 from your box (root@ubuntu)?

Also verify that the port 8006 is not firewalled and accepting connections from the outside, at least this IP address. Maybe nmap can help you.

Let me know if you could make it work or if i can improve the code ?

akther007 commented 10 years ago

Hi, Thank you very much. It works successfully. It was network issues.

Thank you again.

On Mon, Jan 27, 2014 at 9:10 PM, Damien PIQUET notifications@github.comwrote:

Hi,

It seems you have a networking problem. Can you ping 192.168.102.1 from your box (root@ubuntu)?

Also verify that the port 8006 is not firewalled and accepting connections from the outside, at least this IP address. Maybe nmap can help you.

Let me know if you could make it work or if i can improve the code ?

Reply to this email directly or view it on GitHubhttps://github.com/dpiquet/pve-monitor/issues/7#issuecomment-33375008 .

Md. Akther Hossain Khan. +88-016-70272669 Skype : akther_osl