search

dpitts / f16v3_issues

Track issues for F16V3 software
12 stars 0 forks source link

B019 master mode freezes #54

Open hotrod1965 opened 5 years ago

hotrod1965 commented 5 years ago

When a sequence starts in master mode, it makes it about 2 seconds and the controller freezes up. Only way to get it back is to power cycle the controller.

dpitts commented 5 years ago

Try a factory reset. i moved some of the settings around in config to make it lineup better with 2.0x images so users will have less trouble when upgrading. I cannot reproduce the error but I have done reset.

dpitts commented 5 years ago

Hi

Not sure. No player code was changed in b019. I only added more ZCPP stuff. Maybe send me your fseq, F16V3 config, fseq and .wav files.

David

From: PeteyHall notifications@github.com Sent: Monday, October 29, 2018 5:58 AM To: dpitts/f16v3_issues f16v3_issues@noreply.github.com Cc: David Pitts david@pixelcontroller.com; Comment comment@noreply.github.com Subject: Re: [dpitts/f16v3_issues] B019 master mode freezes (#54)

After installing b019, I did a factory reset and once I found the issue, I did another reset but it didn't help.

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/dpitts/f16v3_issues/issues/54#issuecomment-433883764, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ACJ3BKEKACGUxSsqXf0PyAoFt532Zh7Xks5upu0zgaJpZM4X-N0X.

PeteyHall commented 5 years ago

I just emailed it to you

hotrod1965 commented 5 years ago

b020 fixed the freezing issue for me.

dpitts commented 5 years ago

There was no code changes at all except minor ZCPP data reception change. So nothing changed as far as E131. I was not able to duplicate with b019 either.