Open fitness888 opened 3 months ago
When you check the "Save and restore caret position" option, what you indicate is that you want the application to save in the KNT document, when saving, the position of each note, so that when you open the document you can recover it. It has nothing to do with what you point out. Regarding what you indicate, when you say: "I then scroll down with my mouse to the 23rd row/4th column", how do you do it? How do you get to see exactly that the cursor is in that row and column? Do you see it in the status bar? Because when you scroll with the mouse using the central wheel, what you do is move the scroll bar, but not the position of the caret, which remains in its position (the same as what happens if you use Ctrl+Up/Down and have any of the two options that I highlight here )
If what you do with the mouse is move to that position and click on it, then you should see it reflected in the status bar and it should be remembered. Then, regardless of what you did to see a more advanced position, if after selecting the other application you go back to KeyNote and click inside the text editor it should place the cursor there.
What version of KeyNote NF are you using? Do you have a dynamic tree panel width configured that might be confusing you?
https://github.com/dpradov/keynote-nf/issues/720#issuecomment-2229069558 Thanks for the follow-up...I will need a bit of time to address your questions.
Regarding what you indicate, when you say: "I then scroll down with my mouse to the 23rd row/4th column", how do you do it? I do it by using the middle wheel on my mouse to scroll down to where I want the note to be and then click on that position in the note.
Do you see it in the status bar? Yes
Because when you scroll with the mouse using the central wheel, what you do is move the scroll bar, but not the position of the caret, which remains in its position (the same as what happens if you use Ctrl+Up/Down and have any of the two options that I highlight here ) Yes this I understand...I click the mouse to re-locate the cursor in the new position
If what you do with the mouse is move to that position and click on it, then you should see it reflected in the status bar and it should be remembered. Then, regardless of what you did to see a more advanced position, if after selecting the other application you go back to KeyNote and click inside the text editor it should place the cursor there. Yes I understand this...however the unwanted behaviour I describe does not occur all the time so I will try and get the instructions for what I do exactly that reproduces it as I thought this was a possible option setting.
What version of KeyNote NF are you using? v.1.9.5 .2 Do you have a dynamic tree panel width configured that might be confusing you? No I do not
the unwanted behaviour I describe does not occur all the time so I will try and get the instructions for what I do exactly that reproduces it as I thought this was a possible option setting
Ok, thanks
the unwanted behaviour I describe does not occur all the time so I will try and get the instructions for what I do exactly that reproduces it as I thought this was a possible option setting
Ok, thanks
dpradov are you aware of this malfunction regarding line/column count, not enough room for the column?
dpradov are you aware of this malfunction regarding line/column count, not enough room for the column?
I've never had that problem.
Can you tell me what scaling, font, or similar settings you have set in Windows? For example, currently in my system (W11):
dpradov are you aware of this malfunction regarding line/column count, not enough room for the column?
I've never had that problem.
Can you tell me what scaling, font, or similar settings you have set in Windows? For example, currently in my system (W11):
same as you
100% scale bahnschrift font
https://github.com/dpradov/keynote-nf/issues/720#issuecomment-2239921337 dpradov I needed to go into safe mode for something and noticed that the issue I mentioned was instead ok in safe mode...please disregard my comment regarding it as an issue. I will report back to you when I find exactly what caused it.
https://github.com/dpradov/keynote-nf/issues/720#issuecomment-2241394477
dpradov it seems that it is the statusbar font size selection that is the issue, if too big you get the last number cutoff. It's ok as you can now see.
I have seen a strange behavior of the RichEdit control when the application is restored through a Hotkey of the form CTRL+SHIFT+... The editor ended up receiving an EN_CHANGE message and the Change method of the control was called. "Modified" property of the editor was changed to True (^), and the position of the scrollbar was lost, thus displaying the cursor position.
With another type of Hotkey combination it didn't happen (e.g. ALT+F7)
From what I see, at least in W10, the scrollbar position problem is linked to the fact that the editor catch the hotkey and treats as a modification (^). In fact, if the file had not been modified yet I can see how it changes to display "MOD" (in addition to not respecting the scrollbar position). I also see that the mere fact of pressing CTRL+SHIFT (without any additional key) when the editor has the focus causes the same effect (^). I have been able to easily solve the latter from App.FormShortCut. The solution to the Hotkey was much more difficult to find.
(^) At least it appears as modified when I run it from the virtual machine in W10. In Windows 11 the scrollbar position is altered but it is not being marked as modified. I don't know the reason of that differences.
dpradov are you saying that I can return the statusbar font size selection to a larger font size without the issue of the last number cutoff. I use Winaero Tweaker.
Sorry, but I was not referring to the status bar font size issue, but on the main issue (and more important) you reported here.
Sorry, but I was not referring to the status bar font size issue, but on the main issue (and more important) you reported here.
Thanks dpradov, yes now your post makes sense to me and I'm glad that you have been able to confirm the issue I mentioned in my original post here. I don't use any key combos, as mentioned I click out of the KN note window to another program and then when I click back into the KN note I sometimes have the scroll bar move.
For now, what you say about losing the scrollbar position when you return to KeyNote by clicking on the application and not using the Hotkey combination is something I can't reproduce. If it's ever happened to me, I don't remember. I'll be on the lookout, of course, if it happens to me. Also, if you identify any possible pattern when it happens to you again, please let me know.
For now, what you say about losing the scrollbar position when you return to KeyNote by clicking on the application and not using the Hotkey combination is something I can't reproduce. If it's ever happened to me, I don't remember. I'll be on the lookout, of course, if it happens to me. Also, if you identify any possible pattern when it happens to you again, please let me know.
Will do...
As an example; if my cursor is positioned in the text editor on the 12th row/9th column and I then scroll down with my mouse to the 23rd row/4th column and I then click outside the program window to my browser window to read something and then click back anywhere on the text editor, the page automatically jumps from the the 23rd row/4th column back to the 12th row/9th column. I've unchecked 'save and restore caret position' but it doesn't help prevent this unwanted behaviour.