Firmware problem ?

[gmezz23]

Hello everyone,

I want to realize a network using several "Connect Port X4H", using them as "Router", for

the management of end points, such as "XBEE Digi Sensors adapter L/H/T". They must comunicate with the central "coordinator", realized by a Raspberry Pi2 with mounted on a "RaspBee premium" Zigbee manager.

My questions are:

• I installed the deConz package on the dedicated RPi O.S. following the RaspBee User Manual guidelines. The adopted OS is: Raspbian Jessie from: https://www.dresden-elektronik.de/funktechnik/solutions/wireless-light-control/raspbee-gw-sd-card-image/?L=1 . When I try to automatically find the nodes, deConz do not find the connected nodes. They result associate to the Connect Port X4H, which is a router of my system. Where is the problem?

• Probably, the problem lies in the RaspBee firmware. Actually on our Digi-based system the Connect Port X4H Nema 4X/IP66 Rated control panel show me that the loaded firmwares are:

Gateway Firmware: 0x21a0 Firmware: 2.14.1.15 (Version 82001536_K2 03/08/2012) Sensor Node Firmware Version: 0x2ca7

Where I can find a ".zigbee" extension to update my RaspBee?

You can find the above mentioned component/software in the following:

-Connect Port X4H Nema 4X/IP66 Rated: https://www.digi.com/resources/documentation/digidocs/PDFs/90000832.pdf https://www.digi.com/pdf/ds_connectportx4.pdf -XBEE Digi Sensors adapter L/H/T:http://docs-europe.electrocomponents.com/webdocs/1147/0900766b8114779c.pdf -RaspBee:https://shop.dresden-elektronik.de/raspbee.html?___store=english -deConz:https://www.dresden-elektronik.de/funktechnik/products/software/pc/deconz/

I hope you can help me and I thank you all, Giovanni

[manup]

I have no experience with the Connect Port X4H but the XBee S2 modules can be joined as router as described here https://github.com/dresden-elektronik/deconz-rest-plugin/issues/380

The RaspBee doesn't need different firmware and should just run as coordinator (default setting).

[stale[bot]]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

[stale[bot]]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.