Closed poiuztr123 closed 3 years ago
@Smanar Seems to be another version.
I can say if it s evolution or mutation but tuya are like pokemons.
I have added your device here https://github.com/dresden-elektronik/deconz-rest-plugin/pull/4377 In blind mode, have you a linux machine to test the code ? For the moment I just mimic the HY369, but I don't know the difference between the 2 devices.
It runs on a raspi with Raspbian. So, i guess that means that it is Linux, right? What do i have to do to test it with my HY368? Wait until it is merged in the latest beta?
@poiuztr123 Did you run the inclusion 2x for each device?
I had to run it always 2x just after the first one. Otherwise they would not join correctly. But I got 5 devices working.
Issues I have with them is that they lose connection after a certain time. I'm running tests now on 2.9.2 and since 2 days they seem to be more stable.
I have added your device here #4377 In blind mode, have you a linux machine to test the code ? For the moment I just mimic the HY369, but I don't know the difference between the 2 devices.
@Smanar: I tried to figure out how to compile the product_trv branch as I am a github newbie. I followed the explanation in the readme of the product_trv branch. However, the Tuya thermostat was still not recognized by phoscon. So, I checked if your changes in the source code actually made it onto my raspberry by checking the source files in the deconz-rest-plugin folder onto my raspberry. E.g. in the de_web_plugin.cpp your changes with the new product code weres not included. As a work-aorund I copied the files with wget from rawgithub and was able to compile. However, before I had to resolve one error in the source code (de_web_plugin.cpp and rest_sensors.cpp) where " ||" was missing (twice). The other error (...epoch.addSecs) was apparently due to some other files that still had to be copied, which I did. I tried to identify other files in (https://github.com/dresden-elektronik/deconz-rest-plugin/commit/6447e42d675fc69f34288064abb765a3e3097c86) that included the epoch "thing". Not sure if you can make sense of it (Sorry, I didn't really know exactly what I was doing and I didn't have the time to dive into it. Hope it helps anyway.)
`de_web_plugin.cpp:6484:83: error: expected ‘)’ before ‘R_GetProductId’
R_GetProductId(&sensorNode) == QLatin1String("Tuya_THD HY368 TRV")
^
)
R_GetProductId(&sensorNode) == QLatin1String("Tuya_THD HY369 TRV"))
de_web_plugin.cpp:6477:16: note: to match this ‘(’
if (sensorNode.modelId().startsWith(QLatin1String("SLR2")) || // Hive
^
de_web_plugin.cpp: In member function ‘void DeRestPluginPrivate::updateSensorNode(const deCONZ::NodeEvent&)’:
de_web_plugin.cpp:9399:50: error: ‘epoch’ was not declared in this scope
QDateTime time = epoch.addSecs(ia->numericValue().u32);
^~~~~
de_web_plugin.cpp:9428:50: error: ‘epoch’ was not declared in this scope
QDateTime time = epoch.addSecs(ia->numericValue().u32 - QDateTime::currentDateTime().offsetFromUtc())
;
^~~~~
de_web_plugin.cpp:9443:48: error: ‘epoch’ was not declared in this scope
QDateTime time = epoch.addSecs(ia->numericValue().u32);
^~~~~
make[1]: *** [Makefile.Release:737: release/de_web_plugin.o] Fehler 1
make[1]: *** Es wird auf noch nicht beendete Prozesse gewartet....
make[1]: Verzeichnis „/home/pi/deconz-rest-plugin“ wird verlassen
make: *** [Makefile:40: release] Fehler 2 `
At the end I was able to compile it without errors, copied the plugin to teh deconz plugin folder and tried it. However, when opening deconz-gui the REST-api plugin was missing and thus not working. Is there a log somewhere to check why the plugin is not loading?
Yeah thx, have corrected the PR, and update my branch for epoch issue.
sudo apt install deconz-dev
git clone --branch product_trv https://github.com/Smanar/deconz-rest-plugin.git
cd deconz-rest-plugin
qmake && make
sudo cp ../libde_rest_plugin.so /usr/share/deCONZ/plugins
But if you already have done that, you just need
cd deconz-rest-plugin
git pull
qmake && make
sudo cp ../libde_rest_plugin.so /usr/share/deCONZ/plugins
Yep it s visible, on log at start, but if you have the GUI, the plugin will be not present on deconz on the "plugins" menu. And this command list, copy the file too (it s the last command), I say that, because the compilation have failed, so you can't have the new file to replace.
thanks for the quick reply and thank you for your help. With your instructions it works a lot easier.
There are still two errors. In two locations there is bracket too much or "too early".
de_web_plugin.cpp:6484:85: error: expected primary-expression before ‘||’ token
R_GetProductId(&sensorNode) == QLatin1String("Tuya_THD HY368 TRV")) ||
^~
rest_sensors.cpp:1503:92: error: expected primary-expression before ‘||’ token
R_GetProductId(sensor) == QLatin1String("Tuya_THD HY368 TRV")) ||
^~
After manual correction compiling went through with no errors and I was able to test the plugin.
The phoscon app found a new sensor when pairing, but it didn't show up in the sensor list afterwards. In deconz-gui there is a "Lichterkette" (I guess, light strip) now, with no Thermostat cluster. I guess something is not yet working as expected.
Ok, thx have corrected code too, sorry haven't the machine to test it ATM.
For the integration, it s a long story, but you need to make 2 inclusions, without deleting the device.
But I think the device will be invisible in phoscon (I don't think phoscon support TRV) So you need to use directly the API (I can explain how to do) or use a third application.
Thanks. I didn't recompile as I had done the changes manually.
I tried to pair the Thermostat via phoscon twice without deleting the node in deconz. But no Thermostat cluster info appeared. Do I have to go into the pair mode again on the Thermostat (option 5)?
I can use fhem (homeautomation software) to connect via deconz to devices and a ZHAThermostat "Licherkette" is showing up, but I don't know how to control it. Would a REST-API client liek RESTED help here? I have set it up and can see teh Thermostat there under /sensors but don't know what to do then.
Here are some lines from the deconz debug-view window. I took some random lines that looked interesting. It was from different pairing attempts. Hope this helps
23:12:50:627 [4.1] Get date code
23:12:50:628 skip check bindings for client clusters (no group)
23:12:50:628 don't create binding for attribute reporting of sensor Lichterkette
23:12:50:629 CTRL skip polling while permit join is set
23:12:50:785 APS-DATA.indication from child 0x7036
23:12:50:787 Tuya debug 1 : Time sync request
23:12:50:788 Send Tuya command 0x24, data: 00726026fd6260270b72
23:12:50:788 add task 46082 type 41 to 0x847127FFFE110A9A cluster 0xEF00 req.id 82
23:12:50:789 FP indication 0x0104 / 0xEF00 (0x847127FFFE110A9A / 0x7036)
23:12:50:790 ... (0x847127FFFE110A9A / 0x0DE0)
23:12:50:850 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:12:50:851 [4.1] Get date code
23:12:50:852 skip check bindings for client clusters (no group)
23:12:50:853 don't create binding for attribute reporting of sensor Lichterkette
23:12:50:853 CTRL skip polling while permit join is set
23:12:50:964 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:12:50:966 [4.1] Get date code
23:12:50:968 skip check bindings for client clusters (no group)
23:12:50:969 don't create binding for attribute reporting of sensor Lichterkette
23:12:50:970 CTRL skip polling while permit join is set
23:12:50:997 Erase task req-id: 82, type: 41 zcl seqno: 247 send time 0, profileId: 0x0104, clusterId: 0xEF00
23:12:51:075 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:13:45:377 Force read attributes for ZHAThermostat SensorNode Lichterkette
23:13:45:378 don't create binding for attribute reporting of sensor Lichterkette
23:13:45:379 Force binding of attribute reporting for node Lichterkette
23:16:15:955 [4.1] Get date code
23:16:15:956 skip check bindings for client clusters (no group)
23:16:15:956 don't create binding for attribute reporting of sensor Lichterkette
23:16:15:957 CTRL skip polling while permit join is set
23:16:16:017 APS-DATA.indication from child 0x7036
23:16:16:019 Tuya debug 4 : Address 0x847127FFFE110A9A Payload 033c6602000400000005
23:16:16:020 Tuya debug 5 : Status: 3 Transid: 60 Dp: 614 (0x02,0x66) Fn: 0 Data 5
23:16:16:021 FP indication 0x0104 / 0xEF00 (0x847127FFFE110A9A / 0x7036)
23:16:16:021 ... (0x847127FFFE110A9A / 0x7036)
23:16:16:051 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:16:16:051 [4.1] Get date code
23:16:16:052 skip check bindings for client clusters (no group)
23:16:16:053 don't create binding for attribute reporting of sensor Lichterkette
23:16:16:053 CTRL skip polling while permit join is set
23:16:16:163 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:16:16:163 [4.1] Get date code
23:16:16:164 skip check bindings for client clusters (no group)
23:16:16:164 don't create binding for attribute reporting of sensor Lichterkette
23:16:16:165 CTRL skip polling while permit join is set
23:16:16:225 APS-DATA.indication from child 0x7036
23:16:16:227 Tuya debug 4 : Address 0x847127FFFE110A9A Payload 033d6702000400000023
23:16:16:228 Tuya debug 5 : Status: 3 Transid: 61 Dp: 615 (0x02,0x67) Fn: 0 Data 35
23:16:16:229 FP indication 0x0104 / 0xEF00 (0x847127FFFE110A9A / 0x7036)
23:16:16:229 ... (0x847127FFFE110A9A / 0x7036)
23:16:16:274 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:16:16:275 [4.1] Get date code
23:16:16:276 skip check bindings for client clusters (no group)
23:16:16:276 don't create binding for attribute reporting of sensor Lichterkette
23:16:16:277 CTRL skip polling while permit join is set
23:16:16:337 APS-DATA.indication from child 0x7036
23:16:16:340 Tuya debug 4 : Address 0x847127FFFE110A9A Payload 033e0202000400000096
23:16:16:340 Tuya debug 5 : Status: 3 Transid: 62 Dp: 514 (0x02,0x02) Fn: 0 Data 150
23:16:16:341 FP indication 0x0104 / 0xEF00 (0x847127FFFE110A9A / 0x7036)
23:16:16:341 ... (0x847127FFFE110A9A / 0x7036)
23:16:16:372 enqueue event config/localtime for /config/
23:16:16:372 Wait 4s till query finished
23:16:16:402 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:16:16:403 [4.1] Get date code
23:16:16:404 skip check bindings for client clusters (no group)
23:16:16:404 don't create binding for attribute reporting of sensor Lichterkette
23:16:16:405 CTRL skip polling while permit join is set
23:16:16:406 Master: read param with arg 0x19
23:16:16:449 Current channel 25
23:16:16:465 CTRL got nwk update id 2
23:16:16:481 Device TTL 5160 s flags: 0x7
23:16:16:497 Outgoing frame counter 67256935 (0x04024267)
23:16:16:532 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:16:16:534 [4.1] Get date code
23:16:16:535 skip check bindings for client clusters (no group)
23:16:16:536 don't create binding for attribute reporting of sensor Lichterkette
23:16:16:537 CTRL skip polling while permit join is set
23:16:16:577 APS-DATA.indication from child 0x7036
23:16:16:582 Tuya debug 4 : Address 0x847127FFFE110A9A Payload 033f03020004000000d2
23:16:16:583 Tuya debug 5 : Status: 3 Transid: 63 Dp: 515 (0x02,0x03) Fn: 0 Data 210
23:16:16:584 FP indication 0x0104 / 0xEF00 (0x847127FFFE110A9A / 0x7036)
23:16:16:585 ... (0x847127FFFE110A9A / 0x7036)
23:16:16:627 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:16:16:629 [4.1] Get date code
23:16:16:629 skip check bindings for client clusters (no group)
23:16:16:630 don't create binding for attribute reporting of sensor Lichterkette
23:16:16:632 CTRL skip polling while permit join is set
23:16:16:763 poll node 00:15:8d:00:03:1e:aa:c3-01-0b04
23:16:16:764 Poll ZHAPower sensor node Adapter plug SP 120
23:16:16:913 APS-DATA.indication from child 0x7036
23:16:16:915 Tuya debug 4 : Address 0x847127FFFE110A9A Payload 033f03020004000000d2
23:16:16:916 Tuya debug 5 : Status: 3 Transid: 63 Dp: 515 (0x02,0x03) Fn: 0 Data 210
23:16:16:917 FP indication 0x0104 / 0xEF00 (0x847127FFFE110A9A / 0x7036)
23:16:16:917 ... (0x847127FFFE110A9A / 0x7036)
23:16:16:978 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:16:16:979 [4.1] Get date code
23:16:16:980 skip check bindings for client clusters (no group)
23:16:16:980 don't create binding for attribute reporting of sensor Lichterkette
23:16:16:981 CTRL skip polling while permit join is set
23:16:17:041 APS-DATA.indication from child 0x7036
23:16:17:043 Tuya debug 4 : Address 0x847127FFFE110A9A Payload 034003020004000000d2
23:16:17:044 Tuya debug 5 : Status: 3 Transid: 64 Dp: 515 (0x02,0x03) Fn: 0 Data 210
23:16:17:045 FP indication 0x0104 / 0xEF00 (0x847127FFFE110A9A / 0x7036)
23:16:17:045 ... (0x847127FFFE110A9A / 0x7036)
23:16:17:106 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:16:17:107 [4.1] Get date code
23:16:17:108 skip check bindings for client clusters (no group)
23:16:17:109 don't create binding for attribute reporting of sensor Lichterkette
23:16:17:109 CTRL skip polling while permit join is set
23:16:17:218 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:16:17:219 [4.1] Get date code
23:16:17:220 skip check bindings for client clusters (no group)
23:16:17:220 don't create binding for attribute reporting of sensor Lichterkette
23:16:17:221 CTRL skip polling while permit join is set
23:16:17:265 APS-DATA.indication from child 0x7036
23:16:17:267 Tuya debug 4 : Address 0x847127FFFE110A9A Payload 03410404000101
23:16:17:268 Tuya debug 5 : Status: 3 Transid: 65 Dp: 1028 (0x04,0x04) Fn: 0 Data 1
23:16:17:269 FP indication 0x0104 / 0xEF00 (0x847127FFFE110A9A / 0x7036)
23:16:17:270 ... (0x847127FFFE110A9A / 0x7036)
23:16:17:330 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:16:17:331 [4.1] Get date code
23:16:17:332 skip check bindings for client clusters (no group)
23:16:17:332 don't create binding for attribute reporting of sensor Lichterkette
23:16:17:333 CTRL skip polling while permit join is set
23:16:17:372 Daylight now: nightStart, status: 230, daylight: 0, dark: 1
23:16:17:374 enqueue event config/localtime for /config/
23:16:17:376 Wait 7s till query finished
23:16:17:393 APS-DATA.indication from child 0x7036
23:16:17:401 Tuya debug 4 : Address 0x847127FFFE110A9A Payload 03420404000101
23:16:17:403 Tuya debug 5 : Status: 3 Transid: 66 Dp: 1028 (0x04,0x04) Fn: 0 Data 1
23:16:17:405 FP indication 0x0104 / 0xEF00 (0x847127FFFE110A9A / 0x7036)
23:16:17:407 ... (0x847127FFFE110A9A / 0x7036)
23:20:02:807 [ND] NWK: 0xD365
23:20:02:808 [ND] Ext: 0x847127fffe110a9a
23:20:02:808 [ND] Current node descriptor: 0x0240800210525200002c520000
23:20:02:809 [ND] Checking node...
23:20:02:809 [ND] All good, nothing to do...
23:20:02:809 FP indication 0x0000 / 0x8002 (0x847127FFFE110A9A / 0xD365)
23:20:02:810 ... (0x847127FFFE110A9A / 0xD365)
23:20:02:810 ZDP indication search sensors 0x847127FFFE110A9A (0xD365) cluster 0x8002
23:20:02:811 ZDP indication search sensors 0x847127FFFE110A9A (0xD365) clear timeout on cluster 0x8002
23:20:02:817 [2] get active endpoints for 0x847127fffe110a9a
23:20:02:847 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:20:02:848 wait response fastEnddeviceProbe() 0x847127FFFE110A9A, elapsed 29 ms
23:20:02:848 skip check bindings for client clusters (no group)
23:20:02:849 don't create binding for attribute reporting of sensor Lichterkette
23:20:02:849 CTRL skip polling while permit join is set
23:20:03:056 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:20:03:061 wait response fastEnddeviceProbe() 0x847127FFFE110A9A, elapsed 241 ms
23:20:03:061 skip check bindings for client clusters (no group)
23:20:03:062 don't create binding for attribute reporting of sensor Lichterkette
23:20:03:063 CTRL skip polling while permit join is set
23:20:03:103 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:20:03:104 wait response fastEnddeviceProbe() 0x847127FFFE110A9A, elapsed 285 ms
23:20:03:104 skip check bindings for client clusters (no group)
23:20:03:105 don't create binding for attribute reporting of sensor Lichterkette
23:20:03:105 CTRL skip polling while permit join is set
23:20:03:118 APS-DATA.indication from child 0xD365
23:20:03:119 void deCONZ::zmNode::setFetched(deCONZ::RequestId, bool) fetched item: 7, node: 0xD365
23:20:03:121 FP indication 0x0000 / 0x8005 (0x847127FFFE110A9A / 0xD365)
23:20:03:122 ... (0x847127FFFE110A9A / 0xD365)
23:20:03:122 ZDP indication search sensors 0x847127FFFE110A9A (0xD365) cluster 0x8005
23:20:03:123 ZDP indication search sensors 0x847127FFFE110A9A (0xD365) clear timeout on cluster 0x8005
23:20:03:129 [4.1] Get date code
23:20:03:362 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:20:03:363 [4.1] Get date code
23:20:03:364 skip check bindings for client clusters (no group)
23:20:03:366 don't create binding for attribute reporting of sensor Lichterkette
23:20:03:367 CTRL skip polling while permit join is set
23:20:03:372 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:20:03:373 [4.1] Get date code
23:20:03:374 skip check bindings for client clusters (no group)
23:20:03:375 don't create binding for attribute reporting of sensor Lichterkette
23:20:03:377 CTRL skip polling while permit join is set
23:20:03:381 enqueue event config/localtime for /config/
23:20:03:382 Wait 11s till query finished
23:20:03:390 APS-DATA.indication from child 0xD365
23:20:03:391 void deCONZ::zmNode::setFetched(deCONZ::RequestId, bool) fetched item: 7, node: 0xD365
23:20:03:394 FP indication 0x0000 / 0x8005 (0x847127FFFE110A9A / 0xD365)
23:20:03:395 ... (0x847127FFFE110A9A / 0xD365)
23:20:03:396 ZDP indication search sensors 0x847127FFFE110A9A (0xD365) cluster 0x8005
23:20:03:403 [4.1] Get date code
23:20:03:574 poll node 00:15:8d:00:03:1e:aa:c3-01
23:20:03:576 Poll light node Kuehlschrank.Steckdose
23:20:03:617 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:20:03:618 [4.1] Get date code
23:20:03:620 skip check bindings for client clusters (no group)
23:20:03:621 don't create binding for attribute reporting of sensor Lichterkette
23:20:03:622 CTRL skip polling while permit join is set
23:20:03:665 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:20:03:667 [4.1] Get date code
23:20:03:668 skip check bindings for client clusters (no group)
23:20:03:669 don't create binding for attribute reporting of sensor Lichterkette
23:20:03:670 CTRL skip polling while permit join is set
23:20:03:872 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:20:03:873 [4.1] Get date code
23:20:03:873 skip check bindings for client clusters (no group)
23:20:03:874 don't create binding for attribute reporting of sensor Lichterkette
23:20:03:875 CTRL skip polling while permit join is set
23:20:04:127 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:20:04:128 [4.1] Get date code
23:20:04:129 skip check bindings for client clusters (no group)
23:20:04:129 don't create binding for attribute reporting of sensor Lichterkette
23:20:04:130 CTRL skip polling while permit join is set
23:20:04:367 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:20:04:368 [4.1] Get date code
23:20:04:368 skip check bindings for client clusters (no group)
23:20:04:369 don't create binding for attribute reporting of sensor Lichterkette
23:20:04:370 CTRL skip polling while permit join is set
23:20:04:371 enqueue event config/localtime for /config/
23:20:04:970 poll node 00:15:8d:00:03:27:7e:aa-01-0702
23:20:04:972 Poll ZHAConsumption sensor node Adapter plug SP 120 (2)
23:20:04:975 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:20:04:977 [4.1] Get date code
23:20:04:978 skip check bindings for client clusters (no group)
23:20:04:979 don't create binding for attribute reporting of sensor Lichterkette
23:20:04:980 CTRL skip polling while permit join is set
23:20:04:983 MAC poll fastEnddeviceProbe() 0x847127FFFE110A9A
23:20:04:984 [4.1] Get date code
I tried to pair the Thermostat via phoscon twice without deleting the node in deconz. But no Thermostat cluster info appeared. Do I have to go into the pair mode again on the Thermostat (option 5)?
Tuya is a little "exotic" no thermostat cluster ^^, all is managed by the tuya cluster.
I can use fhem (homeautomation software) to connect via deconz to devices and a ZHAThermostat "Licherkette" is showing up, but I don't know how to control it. Would a REST-API client liek RESTED help here? I have set it up and can see teh Thermostat there under /sensors but don't know what to do then.
It s perfect, but I don't know FHEM, if you can see the "ZHAThermostat" it mean the inclusion is good, else you will see a plug. FHEM don't support this kind of device ? at least temperature and heatsetpoint ?
Would a REST-API client liek RESTED help here?
Sure but will be difficult for you, if you have FHEM can you take a look on deconz integration ? I can explain wich one API command to use. Will be better for you if you can use them using FHEM.
With the deconz integration in fhem I was able to set the heatsetpoint on the thermostat. I have used a configuration in fhem from a Eurotronic Spirit Zigbee thermostat:
/heatsetpoint (.*)/:perl:{'{"heatsetpoint":' . $VALUE1 * 100 . '}'}
I don’t get any readings like temperature, valve, battery though. Also heatsetpoint is not updated in fhem.
I need to dive a little bit deeper into fhem. Is there a list of config commands and readings that the tuya thermostat supports? If you point me into the right direction on how it would work with Rest-API I can then apply it to fhem as well.
Sure here you have a JSON exemple
"2":{
"config":{
"heatsetpoint":2200,
"locked":true,
"mode":"auto",
"offset":50,
"on":true,
"preset":null,
"reachable":false,
"schedule_on":null,
"setvalve":null,
"windowopen_set":null
},
"ep":1,
"etag":"73f0c1567b0dd3f1ce08a39f0e9995cb",
"lastseen":"2020-10-31T16:56Z",
"manufacturername":"_TZE200_aoclfnxz",
"modelid":"TS0601",
"name":"TS0601",
"state":{
"lastupdated":"none",
"on":null,
"temperature":1800
},
"type":"ZHAThermostat",
"uniqueid":"60:a4:23:ff:fe:9f:4f:a7-01-0201"
}
Your device probably don't support all of them, idk if you can see the device JSON in FHEM ? Else this one is visible in the API You have the temperature in state/temperature. And your device need to use "mode" or "preset" but not both, to be sure check the device JSON.
If you haven't it in FHEM you can find it at
http://IP:PORT/api/KEY/sensors
IP and PORT are the same used for phoscon KEY is an api key, you can use the same used by FHEM.
Using a REST client I got this for two thermostats. I assume that I have to find out from the fhem documentation or ask in the fhem forum how to get the readings into fhem automatically. Thanks again.
"81": {
"config": {
"heatsetpoint": 1800,
"locked": false,
"mode": null,
"offset": -100,
"on": true,
"preset": "manual",
"reachable": true,
"schedule": {},
"schedule_on": false,
"setvalve": false,
"windowopen_set": false
},
"ep": 1,
"etag": "9469bdada24c5ec31f65ea89902524ce",
"lastseen": "2021-02-13T20:25Z",
"manufacturername": "_TZE200_ywdxldoj",
"modelid": "TS0601",
"name": "Buero-T-klein",
"state": {
"lastupdated": "none",
"lowbattery": false,
"on": true,
"temperature": 1850,
"valve": 25
},
"type": "ZHAThermostat",
"uniqueid": "84:71:27:ff:fe:11:0a:9a-01-0201"
},
"83": {
"config": {
"heatsetpoint": 2100,
"locked": false,
"mode": "auto",
"offset": -100,
"on": true,
"preset": "manual",
"reachable": true,
"schedule": {},
"schedule_on": false,
"setvalve": false,
"windowopen_set": false
},
"ep": 1,
"etag": "68221fa160b01f2f84d1a19ef0b1c356",
"lastseen": "2021-02-13T16:46Z",
"manufacturername": "_TZE200_ywdxldoj",
"modelid": "TS0601",
"name": "Schlafzimmer-T",
"state": {
"lastupdated": "none",
"lowbattery": false,
"on": true,
"temperature": 2000,
"valve": 100
},
"type": "ZHAThermostat",
"uniqueid": "84:71:27:ff:fe:10:03:d4-01-0201"
},
I m seing your device have both "mode" and "preset", I don't think it will support both, generally tuya TRV support only "preset" Just tell me if I need to disable one of them.
Hi Smanar,
I don't know why one of the two devices has got a value under "mode" and the other doesn't. I also don't know the implications of both "mode" and "preset" being shown. Is there a more detailed description fo all of the functions, readings and configuration settings? How do I disable one of the two?
How do I disable one of the two?
I will do, I just need to know wich one is working or not on your device
"mode" can be "auto" (normal working mode) "heat" (force heat) "off" "preset" can be holiday/auto/manual/confort/eco/boost/complex, but not all feature can be supported too, at least auto/manual I think It s indicated too on your device manual.
I was able to set the "preset" field and saw a result on the Thermostat for:
auto
manual
holiday
boost
eco, comfort, complex: not sure, if it did something
I didn't try the "mode" field as "preset" seemed to be more comprehensive.
Is there a documentation somewhere about all the different fields and configuration options?
You have that https://dresden-elektronik.github.io/deconz-rest-doc/endpoints/sensors/#supported-config-attributes_1
But it s realy device dependent. As "preset" seem work, I don't think "mode" will work ? I have added those command from the documentation, and they are "global" it s realy generic, not all can work for all devices. The better way is looking the device manual, if you have one, and not in chinese.
"Preset" is generaly for thermostat. "Mode" is generally for TRV.
@Smanar Not sure if it is ok to put this here but I've to another TRV which looks like Tuya:
It is also not updating lastupdated and only shows 2 Clusters.
Should I open a new ticket for this?
Kind regards
You have that https://dresden-elektronik.github.io/deconz-rest-doc/endpoints/sensors/#supported-config-attributes_1
But it s realy device dependent. As "preset" seem work, I don't think "mode" will work ? I have added those command from the documentation, and they are "global" it s realy generic, not all can work for all devices. The better way is looking the device manual, if you have one, and not in chinese.
"Preset" is generaly for thermostat. "Mode" is generally for TRV.
Thanks for the link. I wasn't aware of this list.
I checked if "mode" is working on the devices as well and it does.
It seems that when the device is in "auto" mode one can use preset to determine what exactly it is supposed to do. I would assume that "auto" in preset (in addition to "auto" in mode) uses the schedule nd changes the heatsetpoint according to a schedule (6 different auto mode periods) that can be set in the device. I have attached the manual. The different presets that can be set manually on the device with the buttons and they are mentioned throughout the manual. But it seems that nor all general presets are implemented, i.e. eco, comfort, complex seem to be missing.
@ easybeat
Not sure if it is ok to put this here but I've to another TRV which looks like Tuya:
It is also not updating lastupdated and only shows 2 Clusters.
For the lastupdated issue, the PR is not yt validated, it s this one for the tuya siren Only 2 clusters can be normal, tuya hide sometime the tuya cluster.
But the device is working or not ?
If not and if you are using the last version (2.10.0), there is already an issue for that https://github.com/dresden-elektronik/deconz-rest-plugin/issues/4417
@poiuztr123
"on" turns the device apparently in on mode (ON shown on the display) and probably opens the valve 100% (I couldn't really check)
Huuu ? there is no "on" in code, idk what happened ^^
But yes, I can't explain why there is 2 "auto" (and both are working to help), perhaps the "auto" for "mode" is just a "on".
But an easy test you can do, read the manuel for the feature you want, use the device according to it, wait some minuts (this kind of device are lazy) and check the modified field in the JSON, the next time you can do the reverse.
I meant “heat”, not “on”. Have corrected it above.
Yes, I think “auto” for “mode” is ‘device on’ and the “preset” determines in which operating mode the thermostat should be.
After having used the thermostat for a few days I have a different question related to the zigbee connection, pairing and the use of routers in the zigbee network.
I have used the thermostat on the same floor as the raspbee/conbee over a few day and after everything seemed to work fine without lost connections I have tried to move one of the thermostats down to the basement to check if they work over long distances as well. If this would have been successful I would have ordered more to retrofit the entire house.
However, I couldn't access the thermostat anymore and in deconz-gui I saw that it had lost connection (red dot) and it also didn't try to use a router. I tried to repair it in its final location in the basement, but that didn't work.
Does anybody have experience with the HY368 Tuya thermostats when they are used via routers, so over long distances? What is the correct procedure? Removing from the zigbee network and then repairing in the final location? Or pairing close to the conbee and then moving to the final location? It doesn't seem to find a new route or select a new router. Is there a way to facilitate that?
@poiuztr123 Hi I have 5 Moes TRV in action and I did face a lot of connection problems. Since I've updated deconz to version 2.9.3 these connection problems are gone and all my devices are online since more than a week.
Which deconz version are you using?
I am using 2.9.3. I have compiled the Rest-plugin with the changes made by Smanar and the instructions above regarding the actual commands to compile it on the raspbee using his branch
Do you use it across different floors? And does deconz show you that some TRV's go through different routers? I have innr SP120 and hoped that they would relay the messages to the TRV in the basement as they do with a bunch of Xiaomi devices.
Yes I use them on different floors. The ones on the same floor as the deconz box work fine. Upstairs I had to install Ikea range extender. Before the update they did only connect to them but now I have 2 which also connected to a light and using this as router...
What is the correct procedure? Removing from the zigbee network and then repairing in the final location? Or pairing close to the conbee and then moving to the final location? It doesn't seem to find a new route or select a new router. Is there a way to facilitate that?
Good question, correct device rebuild the mesh themself automatically, bad one like Xiaomi never. So it s better to make the inclusion at definitive place.
When using the device a new issue came up.
I do not get readings like temperature and valve in fhem. I tracked down the issue. In the Rest-API Json result the "lastupdated" field is always empty. However, in fhem the lastupdated filed is required to trigger the evaluation of the state which includes the temperature and valve to give me the reading for thosw two values in fhem.
Is this related to https://github.com/dresden-elektronik/deconz-rest-plugin/issues/4147 ? Is this resolved? Or is there anything that I can do to test it?
in fhem the lastupdated filed is required to trigger the evaluation of the state which includes the temperature and valve to give me the reading for thosw two values in fhem
You have this information from someone from FHEM ? Because deconz send websocket event itself when the temperature change, and all third app use that.
yes, one of the developer pointed me to the part of the code where fhem evaluates lastupdated. If it is empty or not changed then the code doesn't evaluate the variables (e.g. temperature, valve) in state. Is there a way to make lastupdated work?
Is this related to lastseen and reachable discussion? https://github.com/dresden-elektronik/deconz-rest-plugin/issues/2590
More here https://github.com/dresden-elektronik/deconz-rest-plugin/issues/4147. Will be corrected in this PR, if I m right > https://github.com/dresden-elektronik/deconz-rest-plugin/pull/4379
I can explain how to compile it if you want to test it ?
yes, I would like to compile and test it. How do I do it?
You just need a linux machine, with deconz installed.
The procedure is explained here https://github.com/dresden-elektronik/deconz-rest-plugin#install-deconz-development-package-optional-linux-only
So it will be for you
sudo apt install deconz-dev
git clone --branch tuya_siren_clean https://github.com/Smanar/deconz-rest-plugin.git
cd deconz-rest-plugin
qmake && make -j2
sudo cp ../libde_rest_plugin.so /usr/share/deCONZ/plugins
If you are using your production machine you can make a backup of the file /usr/share/deCONZ/plugins/libde_rest_plugin.so in another folder (renaming is not enought)
Thank you. I have tried it and it seems to work with the two HY368 Tuya thermostats! Lastupdated has a value now and can be used in fhem. I will monitor over the next few days to see if everything else is fine.
Hi, i have the same Thermostat and just want to know if the code is already in the newest beta Version or is it still needed to build it by myself? I cant see the Device in Iobroker. :(
I think he is inside now, what is your deconz version and the device manufacture name ? Remember you need 2 inclusions without deleting the previous one.
If just installed latest Beta. With 2 inclusions you mean starting 2 times Pairing mode on deconz and Thermostat?
Ok, you don't need search more ^^ You have a new device, not in code yet. Can you share too a node picture ?
Ok, i thought it was the same as the Model Identifier is the same and Manufacturer Name starts with the same.
Can you show a node picture, to see cluster and if the device is a router or and end device pls ?
you mean this?
Ok so have made a PR for it, but this device is relay new, so need to test it. For the moment I have mimic the one on this issue, but thoses device are realy not the same.
You have the procedure here https://github.com/dresden-elektronik/deconz-rest-plugin#install-deconz-development-package-optional-linux-only So for you
sudo apt install deconz-dev
git clone --branch trv_again https://github.com/Smanar/deconz-rest-plugin.git
cd deconz-rest-plugin
qmake && make
sudo cp ../libde_rest_plugin.so /usr/share/deCONZ/plugins
Thx, you'r awsome :)
Now it has a name i can see it in iobroker. Now i just have to find out how i can change temprature ;)
It is state/heatsetpoint, but your is at 0°C, strange value, idk if it will work (but I can find info on other project if needed) But the more unknown if the "mode" and "preset", some device support both, other only "mode" and other again only "preset" if you can say me the one I need to disable ?
mode can be "on" "off" "auto" "heat" (not all will work) preset can be
if (data == 0) { preset = QLatin1String("holiday"); }
else if (data == 1) { preset = QLatin1String("auto"); }
else if (data == 2) { preset = QLatin1String("manual"); }
else if (data == 3) { preset = QLatin1String("comfort"); }
else if (data == 4) { preset = QLatin1String("eco"); }
else if (data == 5) { preset = QLatin1String("boost"); }
else if (data == 6) { preset = QLatin1String("complex"); }
I will Test tomorrow. Do i need to set present to the string auto and so on or the data value in the if statement? Do you know if I should see anything on the thermostat when I change values?
By defaut I think the device is "auto" mode, so just need to change setheatpoint.
And yes, if you change the value on the TRV it will be visible on deconz, and vice versa, but can take time. And better, all tuya requests are visible on log (deconz/help/log) for in and out, so if a command is not working, you can just do it manualy on the device, and give me the log to mimic the request.
So i tried it this morning, i placed the Thermostat at the heater and started it. I tried to change the Temprature at the Termostat and i see this in Log: 11:42:35:517 Tuya debug 4 : Address 0x847127FFFE9642E3 Payload 00696902000400000023 11:42:35:518 Tuya debug 5 : Status: 0 Transid: 105 Dp: 617 (0x02,0x69) Fn: 0 Data 35 But i dont see any changes in iobroker about the new temperature. The lastupdated time didnt get updated also.
When i change temperature in iobroker i see this: 11:45:57:697 Send Tuya request: Dp_type: 0x02, Dp_identifier 0x02, data: 000000b4 11:45:58:463 Tuya debug 4 : Address 0x847127FFFE9642E3 Payload 00020204000100 11:45:58:464 Tuya debug 5 : Status: 0 Transid: 2 Dp: 1026 (0x04,0x02) Fn: 0 Data 0 But i dont see anything on the Thermostat. And lastupdated is also not updated.
When i set mode to off i hear the Thermostat doing something(sounds like closing) and i see this in log: 11:49:59:668 Send Tuya request: Dp_type: 0x04, Dp_identifier 0x6A, data: 02 11:50:02:805 Tuya debug 4 : Address 0x847127FFFE9642E3 Payload 006a6a01000101 11:50:02:806 Tuya debug 5 : Status: 0 Transid: 106 Dp: 362 (0x01,0x6A) Fn: 0 Data 1 After that i have a number around 6850 visible on Thermostat that is counting down and i see around every 10 seconds this in log: 1:50:25:905 Tuya debug 4 : Address 0x847127FFFE9642E3 Payload 00767602000400000377 11:50:25:906 Tuya debug 5 : Status: 0 Transid: 118 Dp: 630 (0x02,0x76) Fn: 0 Data 887 Where the value in Data and Payload is decreased by 1 with every log message.
When i send auto i hear the Thermostat doing something(sounds like opening) the countdown stops but i still receive that messages around every 10 seconds. 11:53:49:908 Send Tuya request: Dp_type: 0x04, Dp_identifier 0x6A, data: 00 11:53:56:463 Tuya debug 4 : Address 0x847127FFFE9642E3 Payload 00767602000400000363 11:53:56:464 Tuya debug 5 : Status: 0 Transid: 118 Dp: 630 (0x02,0x76) Fn: 0 Data 867
I hope you have any idea what happens :)
Edit: And when i change Present, i dont see anythin in log.
Have modified the code
Now, some explanations, it seem your device have a strange working mode, the normal mode is "auto" but you can have a mode "heat", in this mode you can have the time counter and new heatsetpoint values.
The code is not tested on my side, so you can have error during compilation.
For the moment avoid chaging value in "heat" mode, idk how the code will react
cd deconz-rest-plugin
git pull
qmake && make
sudo cp ../libde_rest_plugin.so /usr/share/deCONZ/plugins
There are some Compile Errors and a warning that appeared several times: tuya.h:46: warning: "DP_IDENTIFIER_THERMOSTAT_CHILDLOCK_2" redefined
tuya.h:45: note: this is the location of the previous definition
rest_sensors.cpp: In member function ‘int DeRestPluginPrivate::changeSensorConfig(const ApiRequest&, ApiResponse&)’:
rest_sensors.cpp:1398:101: error: expected ‘;’ before ‘)’ token
sendTuyaRequest(task, TaskThermostat , DP_TYPE_ENUM, 0x02, data))
^
;
rest_sensors.cpp:1403:97: error: expected ‘;’ before ‘)’ token
sendTuyaRequest(task, TaskThermostat , DP_TYPE_ENUM, 0x6a, data))
^
;
rest_sensors.cpp:1718:38: error: ‘DP_IDENTIFIER_THERMOSTAT_CHILDLOCK_3’ was not declared in this scope
dp = DP_IDENTIFIER_THERMOSTAT_CHILDLOCK_3;
^~~~~~~~
rest_sensors.cpp:1718:38: note: suggested alternative: ‘DP_IDENTIFIER_THERMOSTAT_CHILDLOCK_1’
dp = DP_IDENTIFIER_THERMOSTAT_CHILDLOCK_3;
^~~~~~~~
DP_IDENTIFIER_THERMOSTAT_CHILDLOCK_1
make[1]: *** [Makefile.Release:1219: release/rest_sensors.o] Fehler 1
There was so much problem ^^, but it s ok now compiling on my side
Screenshots
I saw in other issues that people have been able to pair the HY368 TS0601 with deconz and phoscon. However, I can't pair it in phoscon and there is no Thermostat cluster in Deconz. I am wondering if this is because the Manufacturer identifier is slightly different (different letters behind TZE200_...) compared to the other posts.
Am I doing something wrong? Can anybody help?