Closed Maaacus closed 6 years ago
it seems that i have the same problem, was migrating deconz to a new pi, lights & philips motion sensors paired without a problem. I could not get tradfri motion & remote to pair.
edit:
pps. i pulled the fuses of all other zigbee lights in my apartment, still can not connect the motion sensor & switches
it seems to correspond to the switches & motion sensor already have been connected before. I tried new ones, they connected on first try. At least for me it seems that the problem seems to come from switches & motion detector that previously have been connected to the network
You may try 2.05.37, there are some changes to correct invalid and old data about devices in zll.db
and session.default
files to mitigate the above problems.
Thanks, @manup the new version seems to fix my problem 👍
Hi!
A few days ago I restored my Raspberry Pi 3 b+ and reinstalled my Home Assistant. Installed the latest Deconz V 02 05 35 and paired my IKEA Trådfri lights without any issue. However I couldn't pair the motion sensor and remote controll. Tried to downgrade the software/firmware, reinstall and so on. Nothing solved it. After that I decided to try install my latest version which worked a couple of weeks ago. Reinstalled V 05 32 and the pairing worked like a sharm again.
Is this a known issue? Anyone else with the same problem?
Best regards,