RaspBee not recognized on RPi3 Bullseye

[brown78]

Does the issue really belong here?

• [X] I definitively want to report a bug within deCONZ or its REST-API

Is there already an existing issue for this?

• [X] I have searched the existing issues and there is none for the bug at hand

Describe the bug

I have a Raspberry 3 with RaspBee on it. With an SD-Card flashed with Stretch all works pretty well. I set up a second SD-Card with Bullseye and installed deCONZ-latest-beta.deb - with the latest stable the deCONZ-gui didn't work. The GUI now works but can't connect to the RaspBee. In the /boot/config.txt I added "dtoverlay=miniuart-bt" and Bluetooth is off after a reboot. Still the RaspBee is not found. The command "GCFFlasher_internal l" showed that no device was found. Is there something more I can try to make it work?

Steps to reproduce the behavior

Boot Raspberry deCONZ-GUI is starting No connection to RaspBee is established

Expected behavior

Connecting to RaspBee

Screenshots

No response

Environment

• Host system: (Raspberry Pi 3B)
• Running method: (Raspbian Bullseye)
• Firmware version: (26350500)
• deCONZ version (not Home assistant Addon version!): (2.05.67)
• Device: (RaspBee I)
• Do you use an USB extension cable: (no)
• Is there any other USB or serial devices connected to the ho system? If so: Which? 433MHz Dongle, HMMOD on USBtoI2C

deCONZ Logs

No response

Additional context

No response

[Mimiix]

Hi,

As this is not a bug report as described in #5113 i am closing this issue.

Please open a forum post for help.

Closing.