Sonoff SNZB-02D & SNZB-02P not pairable on 2.27.6 and ConBeeII 26780700

masterpwarz commented 3 weeks ago

Does the issue really belong here?

[X] I definitively want to report a bug within deCONZ or its REST-API

Is there already an existing issue for this?

[X] I have searched the existing issues and there is none for the bug at hand

Describe the bug

Hey,

I had massive problems adding the Sonoff SNZB-02D and SNZB-02P to my headless Raspberry Pi ConBee II system. Both adapters just entered pairing mode and stopped pairing after a few seconds, but they didn’t show up in Phoscon or deCONZ. deCONZ was on version 2.27.6 and the ConBee II firmware was at 26780700.

I had another configuration where they worked, so I downgraded to deCONZ 2.25.3 and firmware 26660700, where I was able to add both and they work fine now. Sadly, I have no logs or screenshots because it is headless.

Steps to reproduce the behavior

Go into pairing mode in phoscon and try to add the Sensor. Its gonna blink 5 Times till it stopped and wasnt founded in phoscon.

Expected behavior

that they would have paired

Screenshots

sry

Environment

Host system: (Raspberry Pi / PC / NAS / MAC)
Running method: (Raspbian / Ubuntu / Home Assistent deCONZ Add-on / deconz-docker container / Windows / Virtual Machine)
Firmware version: (26xxyy00)
deCONZ version (not Home assistant Addon version!): (2.xx.yy)
Device: (ConBee I / ConBee II / ConBee III / RaspBee I / RaspBee II)
Do you use an USB extension cable: (yes / no) -- only relevant for ConBee I/II/III
Is there any other USB or serial devices connected to the host system? If so: Which?

deCONZ Logs

No response

Additional context

No response

Smanar commented 3 weeks ago

Hello, perhaps something similar to https://github.com/dresden-elektronik/deconz-rest-plugin/issues/7881

What is the couple manufactureName/ModelID ?

masterpwarz commented 2 weeks ago

Hey,

Yes, it looks like the same problem. Manufacture is also eWeLink. And on the older deconz it paired with the SNZB-02-multisensor.ddf but it didn't read the values till I pulled the read manually in deconz.

I don't know how to read out the modelID out of deconz from a headless system.

rumtraubenuss commented 1 week ago

Have the same issue with those sensors on deconz 2.28.1 and RaspBee II. Also wonder to get the modelID from a headless system.

dresden-elektronik / deconz-rest-plugin